Wtb some aliens coils

[MrMeowgi]

I know we have a few builders here that can make them still. I just don't have to time to relearn what I had barely learned the first time around.
Looking for sets for dual coil rdas ranging in the .15-.23 range. 3mm I'd preferred.

Also will be looking for a few for a single coil setup for a stacked series mod with the deathtrap v2. Larger single coils welcome in the .4-.55 range. Would like a larger diameter on these single coils as the deathtrap v2 is a large rda.

If anyone can help a catman out I am PayPal ready hoping you're ready to make some coils.

Say 5 single coil aliens with a 4mm id.
And 5 pairs of aliens with a 3mm id.

Just pm me and lemme know or comment here.

Thanks. Posted here as I'm not sure who all looks in the accessories thread

Sent from a pile of wood chips

 

[gsmit1]

@Just Frank is in giddy new builders mode Of course I can't make that commitment, but I have a feeling would have no problem spinning you up some nice ones.

 

[~Don~]

What’s the width of the posts in the death trap?


Sent from my iPhone using Tapatalk

 

[MrMeowgi]

Hmmm not quite sure. I'll Google it up real quick

Sent from a pile of wood chips

 

[MrMeowgi]

Here's a pic. Mind you it's a 30mm rda which is why I was looking for larger coils

Sent from a pile of wood chips

 

[MrMeowgi]

But also have an Asgard 30mm on the way as well for parallel. And a deathwish chapter 4 single mech kit coming as well. It's a 28mm kit with unholy v3 rda. You hook it up and let me know the damage.

Sent from a pile of wood chips

 

[gsmit1]

Yeah and maybe I should have brought this up in private. Wasn't thinking at the time.

 

[MrMeowgi]

Yeah and maybe I should have brought this up in private. Wasn't thinking at the time.

No you're completely fine buddy. You came through with exactly what was asked. I needed links to or the builders them self. I appreciate it man

Sent from a pile of wood chips

 

[gsmit1]

I feel a little better then.

Wow. You're getting into some horsepower setups here.

 

[gsmit1]

No wonder you were asking about series decks the other day

 

[MrMeowgi]

I feel a little better then.

Wow. You're getting into some horsepower setups here.

Had a little splurge moment the last few days. Lol

Sent from a pile of wood chips

 

[gsmit1]

There was a guy a couple years ago bearing a striking resemblance to yourself who sold me a Vaperz Cloud XXX series stack A thing for which I am still grateful Definitely a horsepower setup.

 

[MrMeowgi]

Yea man. Splurge and sell, splurge and sell. I have a hard time with that

Sent from a pile of wood chips

 

[Wb80]

Yea man. Splurge and sell, splurge and sell. I have a hard time with that

Sent from a pile of wood chips

Most of my mods have been acquired from people splurging then selling. Lol

 

[CrazyChef v2.0]

I still have a bunch left over that didn't sell during my PureCoils Closeout sale:
3x26K/36N80, 2.5mm, 5/6, 0.25Ω per coil
3x28K/38N80, 3.0mm, 6/7, 0.50Ω per coil

 

[Carambrda]

Most of my mods have been acquired from people splurging then selling. Lol

It's how I snagged the Suicide King #1. Which is still unfired.

 

[gsmit1]

I don't know how far the conversation went the other day, so if this was settled, forgive me. Since I just got this Uwell Rafale in with a series deck, I figured I'd post this ugly nasty overweight build in a blurry shot as an illustration.

The center post is neutral in this circuit. It carries neither positive nor negative current. One of the posts on the edge of the deck is positive and the other is negative. The center post just closes the circuit between the two. Power flows along that red line (though it obviously doesn't turn in the post )

Both coils are together, electronically one long coil. In this deck this build is .7 ohms. In a standard deck it would be .35.

Actually it was @CrazyChef v2.0 who explained this to me a couple years ago.

 

[gsmit1]

With only one coil, the circuit would be open and nonfunctional.

 

[Carambrda]

With only one coil, the circuit would be open and nonfunctional.

You could always decide to just use the positive and the negative post, leaving the neutral center post unused. That is, assuming the airflow has a single coil option of course.

 

[Carambrda]

I don't know how far the conversation went the other day, so if this was settled, forgive me. Since I just got this Uwell Rafale in with a series deck, I figured I'd post this ugly nasty overweight build in a blurry shot as an illustration.

The center post is neutral in this circuit. It carries neither positive nor negative current. One of the posts on the edge of the deck is positive and the other is negative. The center post just closes the circuit between the two. Power flows along that red line (though it obviously doesn't turn in the post )

Both coils are together, electronically one long coil. In this deck this build is .7 ohms. In a standard deck it would be .35.

Actually it was @CrazyChef v2.0 who explained this to me a couple years ago.
View attachment 166894

The only series deck I have is the Temple 2 NP RDA, which is a 30mm. I guess I could put a pair of 50ply fraliens in it and use that on my Stormbreaker mech (triple 21700 in parallel), but I don't have any 000g wire for making my decore. ?

 

[CrazyChef v2.0]

Both coils are together, electronically one long coil. In this deck this build is .7 ohms. In a standard deck it would be .35.

Almost... If the 2 coils in series are 0.70Ω, a single coil would be 0.35Ω, and these same 2 coils in a standard parallel RDA (like the Velocity or Kennedy) would be about 0.18Ω

 

[gsmit1]

Almost... If the 2 coils in series are 0.70Ω, a single coil would be 0.35Ω, and these same 2 coils in a standard parallel RDA (like the Velocity or Kennedy) would be about 0.18Ω

Thanks for the clarification. So it's a quarter of the series resistance in a regular parallel deck.

 

[CrazyChef v2.0]

Thanks for the clarification. So it's a quarter of the series resistance in a regular parallel deck.

Yup

 

[Just Frank]

@Just Frank is in giddy new builders mode Of course I can't make that commitment, but I have a feeling would have no problem spinning you up some nice ones.

Yes I'm up for making Aliens for @MrMeowgi . Just give me the specs and types and I'll get on it when I can. I sent @nadalama a variety pack and can do the same if you'd like.