Pita?Threaded ones are pita
Would the threaded ones if not high quality damage the threads on the RDA itself while screwing on if cheap machining was used?Check this out.
You think the Amazon ones are ok or should I hold off and go unthreaded 3D mold type?Threaded ones are pita
Pita?
Would the threaded ones if not high quality damage the threads on the RDA itself while screwing on if cheap machining was used?
I cut pieces of pecan stick at 3/8 inch increments and drilled a hole in the center of each for that very purpose. No need to buy atty stands.
Thanks for that as I wouldn’t have put the two together. Not sure why vapefan didn’t clarify hope he’s not salty about personal stuff as it’s water under the bridge imo he understands if he cares to read thisPain In The Ass
Lol would a palo verde tree work? I can get decent woods about 1.5hrs from my house but I’m in the desert. I’m sure if I look hard enough I could find a tree of decent integrity and grain structure, but not readily available persay. If yours work well and fit 510 connect, I wouldn’t mind purchasing a few if you think they would ship well…?I cut pieces of pecan stick at 3/8 inch increments and drilled a hole in the center of each for that very purpose. No need to buy atty stands.
View attachment 208260
I agree common sense goes a long way. Just want sure if they are bad enough to cause a cross tread more times than not d/t poor machining not user error persay.It kind of depends. If a person takes a little time and doesn't cross thread in the screw in atty stand, it's likely there would not be any issues. As with most anything in vaping, there is a lot of room for subjectivity.
You likely take your time putting an atty on a mod and avoid cross threading. What would be the difference between that and an atty stand? Boggles me, I'm sure someone with a college degree will be along to explain, though.
Understand, I'm not defending shitty machine work on products. I am though reminding anyone that using a little patience, common sense can often behoove them. You don't simply dance recklessly near a cliff in a dark night, blindfolded.
Some might. I might support eugenics in such cases, too.
I've seen many folks use them well enough. Not really seen too many complaints regarding the machining. That isn't saying it is good, bad or in between. Merely conveying an observation with a little thought, "hm, if there was bad machining looks like not, so many would use them."I agree common sense goes a long way. Just want sure if they are bad enough to cause a cross tread more times than not d/t poor machining not user error persay.
Weell, you know. You buy them books, spend hrs upon hrs sending them to school but they don't listen till they figure out the same thing on their own. Plastic / no plastic / plastic. 1 great one / several good ones / then 1 great one. So you just sit back and revel in the knowledge that at least you did your part.Pita?
Edit ** Why no response…? I know ur active
Use whatever wood you want. And remember, a clear lacquer to seal the wood helps, in case of a leaky atty. You can also stain the wood if you want.Lol would a palo verde tree work? I can get decent woods about 1.5hrs from my house but I’m in the desert. I’m sure if I look hard enough I could find a tree of decent integrity and grain structure, but not readily available persay. If yours work well and fit 510 connect, I wouldn’t mind purchasing a few if you think they would ship well…?
I wood need to stain it henna color. Everyone knows I like my wood, henna color at all.You can also stain the wood if you want.
Thanks, I wouldn’t have put 2 and 2 together on that one .Pain In The Ass
Apologies, seems clear there is more betwixt you and someone else. I was not aware of that, at all. Genuinely thought you had been living as a mushroom, kept in the dark and fed manure. Tried being helpful for the sake of helpful. D'oh, my toe. Didn't see the big couch sitting in the middle of the room.Thanks, I wouldn’t have put 2 and 2 together on that one .
I had a general idea of what it meant but you clarified it for me and were helpful . I do thank you for that as that other guy won’t respond with anything but negativity towards me. Lol. No elephant in the room per se just a guy jumping on my post giving some unneeded comment.Apologies, seems clear there is more betwixt you and someone else. I was not aware of that, at all. Genuinely thought you had been living as a mushroom, kept in the dark and fed manure. Tried being helpful for the sake of helpful. D'oh, my toe. Didn't see the big couch sitting in the middle of the room.