[WTB] Custom box mod

[FuryHax]

I own several vv mods and I like them all for certain reasons but they all have their downfall for me.

Dna40 - not enough power
Sx mini - almost enough power but great chip.
Sigelei 150w - no USB pass through, don't like the chip.

I'd want the yihi350 chip
Dual 18650s for 120 watts on the chip. 26650s would be better if I could fit the sled.
USB pass through and USB output, for use as a power bank.

I'd appreciate some quotes on what this would cost me. Thanks.

Sent from my Galaxy S6 Edge using tapatalk for Android

 

[dingo1799]

Build your own. They're not hard to do as long as you know how to solder. Guy on ebay by the name vapenstien sells kits, comes with EVERYTHING, he's got dual and triple 18650, dual 26650 kits...all you need is time and a little know how. I bought a triple 18650 box, need to put it together. $45 for a kit, or $200 with a hex ohm logo or maybe a light on it? I'll take the $50 kit all day, everyday. USB ports could be added very simply, but it'd take forever to charge 26650s or triple 18650s at 500ma. He's also got a 120w raptor box kit for $90 i think

For some reason I didn't put the magnets, wire, and voltmeter and everything else that came with it in the pic. FDV 510 connector, I forget the actual # but it's like a 150-160 amp rated FET, just need to get to bending wires and soldering

 

[FuryHax]

Build your own. They're not hard to do as long as you know how to solder. Guy on ebay by the name vapenstien sells kits, comes with EVERYTHING, he's got dual and triple 18650, dual 26650 kits...all you need is time and a little know how. I bought a triple 18650 box, need to put it together. $45 for a kit, or $200 with a hex ohm logo or maybe a light on it? I'll take the $50 kit all day, everyday. USB ports could be added very simply, but it'd take forever to charge 26650s or triple 18650s at 500ma. He's also got a 120w raptor box kit for $90 i think

For some reason I didn't put the magnets, wire, and voltmeter and everything else that came with it in the pic. FDV 510 connector, I forget the actual # but it's like a 150-160 amp rated FET, just need to get to bending wires and soldering

Thanks for the lead but I couldn't find a user by that name on eBay. Also what does. A soldering kit run? I used to weld for work so I'm sure I could solder.

Sent from my Galaxy S6 Edge using tapatalk for Android

 

[dingo1799]

In the search bar type in seller:vapenstien

As for the soldering kit, a decent weller 100/140w gun kit is about $40, then another $10 for a bottle of good flux.

 

[Navymr]

I haven't quite finished it yet but it's supposed to house an sx350 or sx 330 from an ipv3. My board took a poop before I could get it finished and transferred

 

[McPuff]

I haven't quite finished it yet but it's supposed to house an sx350 or sx 330 from an ipv3. My board took a poop before I could get it finished and transferred

this is beautiful!!

 

[Navymr]

Thanks it's Purple Heart and spalted pecan. My first attempt at box joints on a table saw. Trying to find a cheap router table and try and again. Get a little more precision with a router

 

[dingo1799]

Thanks it's Purple Heart and spalted pecan. My first attempt at box joints on a table saw. Trying to find a cheap router table and try and again. Get a little more precision with a router

My dad has a garage full of woodworking equipment, sadly I took wood classes in school and never got interested in building out of wood, I'm too mechanical for artistry lol. But it wouldn't be hard to build or buy a finger joint jig for a tablesaw and use a joint blade? A router table would be easier, but I've never seen a cheap router table lol

 

[Navymr]

I bought dado blades and made a table saw box joint jig but there was too much slop in the arbor and it just wasn't a rigid enough setup. All I ever find is router table combos around $130 like lowes and harbor freight. I have a good Bosch router (garage sale) but haven't found a table on the cheap.