temp control builds, HELP!!!!

[brewersvapes]

I am totally new to building with ni 200 for temp control on my new IPV4. Does anyone know or can help me build a dual coil for this mod. I am able to build a single coil @ .13. Let me know the different styles or ways to build these builds please. Your help is very appreciated. Thank you in advance!!!!! Brewersvapes

 

[Cloudy Peak Vapes]

I built a dual my first build, but it metered below .05, so I took one coil off. I've been using 9-10 wrap 26ga 3mm diameter. Just single coil, they're difficult to fit in a Mutation, but work out fine. Any reason you want duals? That aside, just make sure the leads are secured well and stable in your posts. It is finicky, but if every connection is secure and solid, it should be good.

 

[dre]

If you got 30g twist it till the wire breaks and do 10 wrap around a 2.5mm diameter rod. That will get you a dual coil @ .061-65 and will let you pump full power since the heat coefficient is high

 

[brewersvapes]

Thank you!!!!! I'm gonna have to try this, just for back from my fav. Vape lounge and they tell me to make sure my wraps are separated. Is this what you do???

 

[Cloudy Peak Vapes]

Yes, I leave my wraps apart. Very slightly. I hear it's more difficult to make a contact coil work well.

 

[TheVapingDevil]

Having same issues getting a good nickel build on lemo 2. All I have is 28g. Gonna get some smaller Dia this week.

Sent from my Samsung Galaxy S5 Dumbphone

 

[Zamazam]

I actually wrap my 28 gauge around a 3mm screw to get the right spacing for a spaced coil, usually hit .13 or .15

 

[dre]

Having same issues getting a good nickel build on lemo 2. All I have is 28g. Gonna get some smaller Dia this week.

Sent from my Samsung Galaxy S5 Dumbphone

I use 26g for all my single coil builds it works the best for my temp range in the lower 400's

 

[TheVapingDevil]

I did manage to fit a 8 wrap single coil on the lemo 2 deck. 3mm and around .14 but couldn't really space the wraps. The flavor kinda sucked

Sent from my Samsung Galaxy S5 Dumbphone

 

[dre]

If your building for a dna40 shoot for .1 for a ipv 4 .065-.10

 

[TheVapingDevil]

If your building for a dna40 shoot for .1 for a ipv 4 .065-.10

Guess again lolol. SX M. Problem I'm having is lemo 2 build deck is pretty small to fit all the wraps on it and spaced without hitting edges of chimney

Sent from my Samsung Galaxy S5 Dumbphone

 

[dre]

.065 then for the M yihi recommendation

 

[TheVapingDevil]

I'll give it a try plus pick up so n e smaller Guage wire for the hell of it

Sent from my Samsung Galaxy S5 Dumbphone

 

[AmandaD]

I have a 3mm coil, 26 gauge spaced wrap in my Lemo 2 - it seems to work fine!

 

[dre]

Stick with 26 for your lemo especially for the M just build a .065 coil

 

[TheVapingDevil]

I have a 3mm coil, 26 gauge spaced wrap in my Lemo 2 - it seems to work fine!

Hey @AmandaD, how many wraps do you have on your Lemo 2 using 26 gauge. I presume its nickle wire?

 

[kwtony]

Have you considered a vertical/chimney coil on your Lemo 2 ? Might give you those extra coils without sacrificing the space.

 

[AmandaD]

Hey @AmandaD, how many wraps do you have on your Lemo 2 using 26 gauge. I presume its nickle wire?

Yes it's nickel 26 gauge on a 3mm drill bit. I'll have to check when it's empty but probaby around 5-7.

 

[TheVapingDevil]

That's about what my coil calculator said as well. I will proceed with 26 g then lolol. How's the flavor with that build. I'm a,bit leary ad it might be a warm vape down at .06. What's ur experience like with it. I really want to love this tank on my SX M so will try anything to make it work and get good flavor

Sent from my Samsung Galaxy S5 Dumbphone

 

[dre]

If you want a cool vape set it around 395° if you want it warm try around 460°+ flavor will be better then kanthal. Also wick with the pancake method rip tripper did a video how to

 

[AmandaD]

That's about what my coil calculator said as well. I will proceed with 26 g then lolol. How's the flavor with that build. I'm a,bit leary ad it might be a warm vape down at .06. What's ur experience like with it. I really want to love this tank on my SX M so will try anything to make it work and get good flavor

Sent from my Samsung Galaxy S5 Dumbphone

Flavor is excellent! Currently I'm running this mix at 510F and 30 watts but you can certainly turn the temp way down for a cooler vape (and, yes, it's at 0.06).

 

[TheVapingDevil]

Flavor is excellent! Currently I'm running this mix at 510F and 30 watts but you can certainly turn the temp way down for a cooler vape (and, yes, it's at 0.06).

Thanks @AmandaD I will go get some 26 g Nickle here tonight and give it a shot. I usually vape my temp at 450- 470 at 28 -32 J so it should provide a good vape. Thanks again for your help

 

[vapinbacon]

Hi guys new to the forums read a bunch of the coil threads great help and much appreciated I am using a kanger mini and build with kanthol with itaste mvp 3.o but getting a HM DNA 40 4dv hopefully this week I always use 28 and 26g kanthol but my sweet spot is at 1 ohm noticed the max on TC is 1 ohm can someone recommend a build for my sub tank mini with which gauge NI200 and how many wraps and mm size like 2 or 2.5mm screw driver to get like a .7 , .9 , or 1 ohm where i really like with the kanthol usually winds up .7 to 1 ohm thanks for any help

 

[LetTheLuckRoll]

sorry bacon but with temp. con. you have a low resitance wire or ni 200 .you have to build it at a lower ohm than you desire. sweet spot is .15 down to .065

 

[vapinbacon]

sorry bacon but with temp. con. you have a low resitance wire or ni 200 .you have to build it at a lower ohm than you desire. sweet spot is .15 down to .065

thanks but i i dont get why it says it will go up to one ohm in twmp control i know its something like 75 wraps lol so you think if I like using 1 -.9 ohm on kanthal I will like .15? Thanks

 

[LetTheLuckRoll]

it is different but the same . the only way to find out is try it if you like it great if not then don't use temp control.i am on the fence on the ni200 and i got to try titanium yesterday as well and its weird tasting.maybe after a break in that taste will go away on titanium.hope this helps a little bacon

 

[vapinbacon]

thanks for suggestions guys I think ill try it when my hana comes maybe ill order some 28g ni200 seems to be what most people are saying they like i personally on the kanthal front love my 26g for a 7 wrap micro 1 ohm coil