1. Disassemble all the parts, wipe the parts clean with specific products.
1a. disassemble your unit (tank). drain any juice left and dry with paper towel.
2. Please see to that the electrode at the underside of the base must be taken down,keep it in a safer place and don’t lose it because it's mini.
2a be sure to remove coil and don't lose it because it's small.
3. Put all the parts in a warm water tank,because cold water makes it more difficulty to wash tobacco tar off atomizer. I think the water temperature of 60℃ is the optimal temperature.
3a put all parts ,except coil in hot distilled water and let soak ,.
4. Leave to steep for about 30 minutes,take them out and dried them all.
4a after soaking rince off with more distilled water and dry with paper towel and/or pipe cleaners
5. Nautilus cannot be wiped clean easily.There is an effective way I’d like to share. Leave it next to the outlet of a laptop for 20 minutes.
5a Coil can be wiped dry, then put it in a warm location, like next to the exhaust fan on your laptop,tube side down. Use pipe cleaner in tube of coil to help dry.
After you cleaned all the things, you can use it directly. Never forget to add several drops oil into Nautilus to prevent it from getting burnt.
Rassemble parts and add a couple drops of juice to coil, or fill and wait a few minuits so coil's wick gets juice on it.
After you finished every steps,you'll find it is a economical way to keep your atomizer clean and as good as new
After you finished every step,, you'll find your unit will be a little cleaner, but not as good as replacing the coil with a new one.