Excellent, just threw a nickel dual build on it and it's odd says .06 on my dna40 but wont fire says low resistance on my LI...?? Am I missing something? Eh I will mess with it I have just fired it up haven't messed with it much yet. But I love the wicking channels on the goblin mini its a really neat little tank looks like it will work great.
I believe the vs will fire down lower then .10 it just soft limits you in temp control you won't get the desired wattage's in soft limiting. in regular kanthal I think it will show ohms to low or something,hmmmm, showing .048 and .06 on my vs so looks to be below the .05 for the mod weird its a bit different between the two...no big deal I might just plug the other side and run single coil on it.
.055 is the absolute lowestThe P4U mods are supposed to fire down to .05 but if you go below about .06 you're probably gonna get "short!" messages all day long.
That looks freakin sweet where you get the vinyl from?I really like the look of the ipv3 vr. So, I picked up red carbon fiber vinyl
View attachment 24530
Amazon. Metrorestyling. It ran me $4.90 inc shipping for a 12x12 sheet. It is 2 mil thickThat looks freakin sweet where you get the vinyl from?
Nice I wanna jwrap mine with black and blue carbon fiber but I can bring myself to spend $20 on a sticker. But ill gladly do a trade for attys if someone has one maybe a lemo drop or lemo 2 or veritas and Marquis
Sent from my XT1030 using Tapatalk
To much air for me I like my airflow like my womenGonna throw that Messes on there? Would look sweet with black and blue CF.
I just cleaned all of my 510's and the device's 510 with 91% isopropyl. Doing some googling, there's not much info, but a bad connection somewhere seems to be the culprit. Mines intermittent. Very intermittent. I read someone who dropped their Mini, and it was alway doing it, and a bent 510 spring was the issue. I lightly pressed the pin down a couple times with a q tip, hoping to maybe straighten anything out. I just chain vaped multiple attys, one being a dual Clapton coil at .22, so hot, and it was fine. Hope it was a connection problem. Sounds like it. I've never even knocked it over, let alone drop it. The spring could've shifted, though, and my attys needed a scrub. Hope it stays good.Nope. I got it once and my 510 connection on my orchid was a little loose. After that I never got it again.
wheres that wrap from?
http://www.707smartskins.com/wheres that wrap from?
I ordered from a new name in the mod wrapping industry hopefully it aint crap.
excellent can't wait for some options and as usual couple pages back saw Dre's velocity builds....pardon my laziness on the search good news on the sleeve though I like wraps but they just don't give my OCD the protection it needs....Sweet vapes has the cases / sleeves coming soon
http://sweet-vapes.com/pioneer4you-ipv3-li-165w-silicone-case.html
It's actually completely flush when attys are mounted, I feel like it wasn't at first, though. I only finger tighten, I don't abuse my gear and crank it down tight as can be. The outer insulation is a bit offset, but so is my Mini, and my 4. Though, my Mini does it sometimes, the 4 has, and the 3 has. I didn't get it again last night. It's been intermittent since I got it, I thought nothing of it since it happens occasionally on all of mine. It seems it shouldn't. I'm gonna keep an eye on it, hopefully it is fixed. Again, I cleaned all of my attys, and the 510 on the device, and I lightly pushed the floating pin in a bit. Very carefully, not close to as far as an atty would. Just to make sure it isn't crunchy. I don't think I can return it at this point. I'm gonna hope it's a connection issue, and not an internal one, since I don't know how to solder.have you noticed the positive pin on the 510 for the ipv sits a little offset?
You can use 20 gauge and 22-24g for dual coilsWell couldn't hold out had to go swoop up some spidersilk TI, shop is local to me so just gas no shipping bought 2 to play with tonight, still overpriced but screw it can't own this mod and not mess with it NOW!!!!
Gonna try your suggestion in the goblin dre, also gonna throw a build on my velocity. Dre, did you do a TI build yet on your velocity?
Not that I have found yet. I have notifications set from sweet vapes for when they have them in stock.
I do see that RHS is starting to make them also,besides Yeahsmo. RHS manufactures the swirled colored cases for the sxmini. So, might wait for those and get a red/black swirled case.
Thanks @Maverik_X, just ordered the red/black swirled. Good looking out bro.Ordered me a grey and black one.
Edit just ordered the black and red aswell lol this seller has them instock
Anyone know if anywhere is selling sleeves yet?
Man only if I still had a PayPal account. Anyone wanna order me a black one out of the goodness of there heartThanks @Maverik_X, just ordered the red/black swirled. Good looking out bro.
Thats a sick wrap, How can I get one from you?I made a custom wrap for mine. Super-Ohm Man!
View attachment 25577
Message me and we can chat about what you are looking for.Thats a sick wrap, How can I get one from you?
Messaged and thanksMessage me and we can chat about what you are looking for.
I haven't yet. shows to be delivered tomorrowMaverick have you received your sleeve yet?
cool ordered an orange a black myself. Would u mind posting a pic when u get it on?I haven't yet. shows to be delivered tomorrow
Personally, if it's not giving me the vaping experience that everyone else that has the device is getting due to an issue with it... I would return it for another one. If the next one does it, then I would look into what I might be doing wrong.Those sleeves are nice, I'm gonna have to get one. My "Too Hot!" Issue disappeared almost completely for a week, then on Sunday night I couldn't vape an RDA dry without it. I threw it on my iPV4, and it did the same thing after a few pulls, then back to normal and vaping. Nothing aside from the RDA is getting remotely hot, batteries, casing, nothing. It has to be an error. I tightened my post screws, and vaped the rest of the night with it happening once if at all. Then, this morning, same thing, both devices. It's happened with multiple RDA's and on Smok TCT, so I don't know. I had contacted the vendor and he is gonna swap mine out, I'm putting it in the mail today. Already packaged and paid, I'm just second guessing sending it back if my 4 is doing the same, just not as frequently.
It's already packaged and paid, you all think I should exchange it, just to be sure? The touch sensor didn't work in TC mode until I updated the firmware, so it had something strange anyway. Also, on my 3 Li, and my 4, when I hold power to access the firmware edition, first I get a screen that looks like the broken DNA 40 boards. Anyways, I think I'm sending it back, if the 4 didn't do the same thing I definitely would. Opinions?
Done. Just got back from the P.O. The only pause I had was when the 4 did the same thing. It hasn't been notably problematic, though. If my builds were all I was basing this on, it would also be different, but it's doing it with stock Smok TCT coils on one tank. Also, google yields an ungodly lack of info on this, suggesting that it's not a common problem. I could barely find any info when troubleshooting.Personally, if it's not giving me the vaping experience that everyone else that has the device is getting due to an issue with it... I would return it for another one. If the next one does it, then I would look into what I might be doing wrong.
That's my thought, maybe it's pin pushes too far. It hasn't always happened on these attys, and it's only happened on one of my 3 Smok TCT's. My RDA's are four authentic Mutation X V3, one is V2, and a Magma clone. Arctic Tank is fine, two of the Smok's are fine, and when it happens, it's about every 10 draws or so. Sometimes only once, sometimes constant.Is there a possibility that one of your atomizers is messing with your 510 connector on the mods? Seems to be the only variable for both ipv's.