Sub tank mini leaking

[MR. MAYHEM]

I have the subox mini. The tank is starting to leak from air vents and between the air vent turn wheel. The oring does not look damaged from what I see. It is snug tight to me. I saw a thread somewhere but can't find it. It was great Til beginning of this week. I don't think I've had it a month yet. And I rotate between my sub tank mini and my Atlantis. My Atlantis does not leak at all.


Sent from my iPhone using Tapatalk

 

[Whiskey]

Bump for help

 

[smacksy]

My Mini started leaking from the air slots too using the supplied rebuildable deck..seems I didn't have enough cotton in my build..I installed a new thicker cotton wick and made sure those juice inlets were covered good with the cotton..It did the trick! No more leaks..
Hope this helps

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

I wasn't using rebuild able just the .5 and the 1.5 coil. I gotta keep it standing. If it's in my pocket and tilts slightly u can see wetness around the turn dial. If u turn dial to a different hole u see the hole drenched


Sent from my iPhone using Tapatalk

 

[kwtony]

Check the glass, it might be distorted or uneven bottom. You can try the other one, or get 800 grit wet sane paper and give the bottom of the glass a few passes and even it out...

 

[smacksy]

I wasn't using rebuild able just the .5 and the 1.5 coil. I gotta keep it standing. If it's in my pocket and tilts slightly u can see wetness around the turn dial. If u turn dial to a different hole u see the hole drenched


Sent from my iPhone using Tapatalk

Is the coil gasket in good shape? Is the coil screwed down tightly in the base?
About the only way I can think of as to why it leaks ...good luck with it!

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

I double checked everything and everything is snug not overly tight


Sent from my iPhone using Tapatalk

 

[smacksy]

I would think its leaking at the coil in the base that leads to the air slots.. If the o-ring was leaking on the base itself I would think juice would show up on the outside of the base above the airslots ..I was just looking at mine trying to figure out what would make it leak juice into the air passages..sorta out of ideas..lol

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

It's also leaking from the turn dial. When I turn to different air vents u see it seeping


Sent from my iPhone using Tapatalk

 

[smacksy]

It's also leaking from the turn dial. When I turn to different air vents u see it seeping


Sent from my iPhone using Tapatalk

How old is it? You might just want to get another one maybe..just a thought

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

It's about a month maybe a little less


Sent from my iPhone using Tapatalk

 

[MR. MAYHEM]

I have orings at work think about trying a oring


Sent from my iPhone using Tapatalk

 

[smacksy]

It's about a month maybe a little less


Sent from my iPhone using Tapatalk

That's about how long I've had mine..
But it dosent leak at all, yet.. lol

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

It was ok Til this week. The oring I have is same size but too thick. Damn


Sent from my iPhone using Tapatalk

 

[smacksy]

It was ok Til this week. The oring I have is same size but too thick. Damn


Sent from my iPhone using Tapatalk

Maybe your local shop will have a o-ring that will fit it ?

sent from my XT1080 via Tapatalk

 

[MR. MAYHEM]

I have new coils coming in so I do my other setup and go to shop see if they have new red orings


Sent from my iPhone using Tapatalk