SOLD: DNA 40 Hana Modz One Mod for Other TC Device

[BenJammin]

I am selling or trading my Hana Modz DNA 40 One Mod. You can run this mod in single 18650 for a stealthy vape or dual parallel 18650 mode for extra battery life. This mod works really well and will come with the plastic case it came in as well. I'm just looking for something new, I like to rotate my stash, then again, don't we all? Lol

I am really looking for a trade to another TC device, preferably one with Ti mode, but will also accept cash.

$100



Above I have a Subtank Plus on the mod (for comparison) and a Sigelei 150 behind it (for size comparison).

Here are the features as listed on Hana Modz site:
NEW Revolutionary All In One Mod. Smallest, Lightest DNA 40 mod.

• Single and Dual battery case attachments included in the complete kit.

• 18650 Battery
  (not included)

• LG HE2 or LG HE 4 batteries are recommended

• BATTERIES MUST BE INSTALLED POSITIVE SIDE DOWN

• Both battery case release buttons on the sides must be pressed when removing the battery case.

• 40 watt regulated mod

• .1 incremental wattage adjustment

• Dimensions: 2.7" x 1" x1.5"

• Weight: 1.3 ounces in single battery mode(without battery).

• 510 floating connector(spring loaded)

• ABS thermoplastic polymer body

• OLED display provides:
  wattage, ohm, voltage, battery,
  temperature, and error messages

• Temperature Protection
  (Evolv Patented Technology)

• Preheat functionality

• Reverse battery protection in single battery mode

• 500mA micro-USB
  on-board charging
  (cord included)

• Overcharge protection
  (stops when fully charged)

• Pass-thru charging functionality

• 3-Month Manufacturer's Warranty

• PATENT PENDING

 

[Vaperjim]

Dude, just a few days ago, you were loving on that thing.


Sent from my iPhone using Tapatalk

 

[BenJammin]

Dude, just a few days ago, you were loving on that thing.


Sent from my iPhone using Tapatalk

And I still am lol... Just on to bigger and better things... I'd really like to run my Billow 2 in TC, but with only 40 watts, it doesn't heat up quick enough and starts spitting juice at me lol

With the Subtanks however, this thing is awesome! It's small, as you can see, and its super light, like I can't even describe it... Hold a 18650 in one hand and this mod with one 18650 installed, and you won't be able to tell that much of a difference...

 

[IngrownClouds]

And I still am lol... Just on to bigger and better things... I'd really like to run my Billow 2 in TC, but with only 40 watts, it doesn't heat up quick enough and starts spitting juice at me lol

I run most of my TC devices under 40W. I only run one setup at 45W because that's the flavors pinch point (anymore = flavors muted, any less = not flavorful enough).

I run Ti in all my setups, I even have a Sigelei 75W that I can run any Ti setup on. I just offset the temp about -150℉-200℉ from what it would be on my Ti TC devices. (Quick ex. I run my Crown tank at 530℉ on my IPV4S with a single 25g Ti wire, comes in at 0.16Ω - I can hear TC working after 2 seconds of firing - quick ramp up. Now on my Sigelei that doesn't support Ti, I run my Crown, same 25g Ti wire at 0.16Ω but I set my TC to 330℉, still ramps up just as quick and I can hear TC working after about 2 seconds as well).

Wasn't trying to thread jack, but thought you might like hearing this.

 

[BenJammin]

I run most of my TC devices under 40W. I only run one setup at 45W because that's the flavors pinch point (anymore = flavors muted, any less = not flavorful enough).

I run Ti in all my setups, I even have a Sigelei 75W that I can run any Ti setup on. I just offset the temp about -150℉-200℉ from what it would be on my Ti TC devices. (Quick ex. I run my Crown tank at 530℉ on my IPV4S with a single 25g Ti wire, comes in at 0.16Ω - I can hear TC working after 2 seconds of firing - quick ramp up. Now on my Sigelei that doesn't support Ti, I run my Crown, same 25g Ti wire at 0.16Ω but I set my TC to 330℉, still ramps up just as quick and I can hear TC working after about 2 seconds as well).

Wasn't trying to thread jack, but thought you might like hearing this.

I love how this is your second post on this forum and you use it to tell someone who has over 2000 posts how to do something... First off, I know that I can still run Ti on a chip that doesn't "support" Ti. The temp setting needs to be adjusted 90-100degrees down from what it really would be. For instance on this mod I'm running a 3mm ID, 24g Ti, 8 wrap, .19ohm coil at 390 degrees and 25w. Then, in your examples, you never mentioned a dual coil device like the Billow V2 that I was talking about. I do and know all of that about this mod and understand temp control and Ti wire completely. Believe me I have rewicked the B2 many many times hoping it was just my wicking causing the spitting. It was not. The coils aren't heating the juice quick enough to turn it into vapor before it starts spitting at me. With my single coils I love this mod. That is also besides the point... I wasn't asking if I should keep this mod, or what I'm doing wrong... I simply stated, on to bigger and better things... I buy and sell something on this forum like twice a month... I like new shit ok?

 

[IngrownClouds]

I knew if I didn't say anything about a dual coil, I would get a response about it

Now for the dual coil version example:
Cthulhu (love this thing) or Zephyrus by UD (love this thing as well)
Both have the same exact build.
25g Ti, dual coil, 5 spaced wraps, (2.4mm ID) comes in at 0.09Ω
TC set to 490℉ on my IPV4S and this thing chucks clouds and no spitting. TC on Sigelei set to 310℉, same effects, huge clouds and no spitting. Ramp up is immediate, TC kicks in about 1.5 seconds of holding the fire button. (note: I do notice on my Sigelei 75W that the fire button has about a 1.5 second delay before the power reaches the atomizer and starts firing)

Different example:
This is on the Goblin v2 RTA
28g TI, dual coil, 5 spaced wraps (2.4mm ID), comes in at 0.17Ω
TC set to 550℉ on my IPV4S, huge clouds and flavor, no spitting. TC on Sigelei set to 355℉, same effects.

Maybe this is better for you.

 

[BenJammin]

I knew if I didn't say anything about a dual coil, I would get a response about it

Now for the dual coil version example:
Cthulhu (love this thing) or Zephyrus by UD (love this thing as well)
Both have the same exact build.
25g Ti, dual coil, 5 spaced wraps, (2.4mm ID) comes in at 0.09Ω
TC set to 490℉ on my IPV4S and this thing chucks clouds and no spitting. TC on Sigelei set to 310℉, same effects, huge clouds and no spitting. Ramp up is immediate, TC kicks in about 1.5 seconds of holding the fire button. (note: I do notice on my Sigelei 75W that the fire button has about a 1.5 second delay before the power reaches the atomizer and starts firing)

Different example:
This is on the Goblin v2 RTA
28g TI, dual coil, 5 spaced wraps (2.4mm ID), comes in at 0.17Ω
TC set to 550℉ on my IPV4S, huge clouds and flavor, no spitting. TC on Sigelei set to 355℉, same effects.

Maybe this is better for you.

I don't do spaced coils... All of my coils are contact and I like them better that way. This causes ramp up times to be drastically delayed... hints the spitting

 

[IngrownClouds]

I love how this is your second post on this forum and you use it to tell someone who has over 2000 posts how to do something... First off, I know that I can still run Ti on a chip that doesn't "support" Ti.

Look dude, I'm an experienced vaper. Been doing this for 4 years buddy. You don't need to be so damn rude when I was just throwing some advice out there as far as spitting goes and builds, maybe a little insight for you.

So first off, if this is my second post or 10000, I still have a lot of knowledge about vaping. I'm an avid forum member on plenty of vape forums, just not here. I just follow the discussions around here and because I decided to share some knowledge with you, you become rude and make assumptions as to my credibility as a vaper?

I decide to post and this is the welcome I get for just trying to help you dude?

 

[BenJammin]

Look dude, I'm an experienced vaper. Been doing this for 4 years buddy. You don't need to be so damn rude when I was just throwing some advice out there as far as spitting goes and builds, maybe a little insight for you.

So first off, if this is my second post or 10000, I still have a lot of knowledge about vaping. I'm an avid forum member on plenty of vape forums, just not here. I just follow the discussions around here and because I decided to share some knowledge with you, you become rude and make assumptions as to my credibility as a vaper?

I decide to post and this is the welcome I get for just trying to help you dude?

My point being, I didn't ask for help... I just simply stated I wanted another mod. So why the assumption that I don't know how to properly work my mod or TC... I can point fingers right back at ya...

 

[IngrownClouds]

I don't do spaced coils... All of my coils are contact and I like them better that way. This causes ramp up times to be drastically delayed... hints the spitting

That is your problem dude, you CAN NOT run Ni in TC mode with contact coils... I thought you knew this though.

Only Ti will work with contact coils in TC mode. TC does not register a contact Ni coil as the same it does to a spaced Ni coil (this is due to the way it heats up). It will register a contact Ti coil the same as a spaced Ti coil if it supports Ti or you can set the coefficient manually for it.

Just a few words of advice, I vaped contact coils for 3 years straight, nothing but SS and kanthal. I moved to TC and hated the idea of spaced coils till I actually knew why they were used in TC mode. Now any build I do is spaced. You don't need to dry fire at all, just clean the wire, wick and wet.

 

[BenJammin]

That is your problem dude, you CAN NOT run Ni in TC mode with contact coils... I thought you knew this though.

Only Ti will work with contact coils in TC mode. TC does not register a contact Ni coil as the same it does to a spaced Ni coil (this is due to the way it heats up). It will register a contact Ti coil the same as a spaced Ti coil if it supports Ti or you can set the coefficient manually for it.

Just a few words of advice, I vaped contact coils for 3 years straight, nothing but SS and kanthal. I moved to TC and hated the idea of spaced coils till I actually knew why they were used in TC mode. Now any build I do is spaced. You don't need to dry fire at all, just clean the wire, wick and wet.

When did I ever say I was running Ni in TC with contact? First off I don't own any Ni so that would be kind of hard to do... I said I was running Ti contact coils... Obviously I know only Ti will work with contact and I also know that the Ti allows for dual and bigger single coils than with Ni without being super sub ohm... Also, this mod does not support Ti which means it won't register a contact Ti the same as a spaced Ti...

There you go again, jumping to assumptions...

 

[IngrownClouds]

My point being, I didn't ask for help... I just simply stated I wanted another mod. So why the assumption that I don't know how to properly work my mod or TC... I can point fingers right back at ya...

You said you wanted another one because of the 40W not being enough to run TC effectively and that caused spitting....

I'd really like to run my Billow 2 in TC, but with only 40 watts, it doesn't heat up quick enough and starts spitting juice at me lol

I was chiming in to let people know that is NOT the reason you have those issue bud, cheers.

Don't put out false conceptions I wouldn't have commented in the first place. Next time don't but such a dick when someone is just trying to lend a helping hand.

 

[IngrownClouds]

When did I ever say I was running Ni in TC with contact? First off I don't own any Ni so that would be kind of hard to do... I said I was running Ti contact coils... Obviously I know only Ti will work with contact and I also know that the Ti allows for dual and bigger single coils than with Ni without being super sub ohm... Also, this mod does not support Ti which means it won't register a contact Ti the same as a spaced Ti...

There you go again, jumping to assumptions...

Now you just said you were using Ti, you never stated that in any previous posts. Why don't you try a spaced coil, it will simply eliminate all your issues and you will save battery life because you can set your wattage lower. Not sure what kind of ohm's you are aiming for either. TC was invented with spaced coils bud, give it a try. I'm telling you all those issues will go away... Also a lot less coil gunk on spaced coils. Btw if your making a contact Ti coil, you are dry burning the coil to get the hot spots out I'm assuming. Ti should only be pulsed when firing dry, not to the point like you need it to be to ensure the heat is evenly distributed through the coil. This is another reason I say spaced Ti still, no dry fire, if need be, do a slight pulse fire and wick and vape.

 

[AmandaD]

Now you just said you were using Ti, you never stated that in any previous posts. Why don't you try a spaced coil, it will simply eliminate all your issues and you will save battery life because you can set your wattage lower. Not sure what kind of ohm's you are aiming for either. TC was invented with spaced coils bud, give it a try. I'm telling you all those issues will go away... Also a lot less coil gunk on spaced coils. Btw if your making a contact Ti coil, you are dry burning the coil to get the hot spots out I'm assuming. Ti should only be pulsed when firing dry, not to the point like you need it to be to ensure the heat is evenly distributed through the coil. This is another reason I say spaced Ti still, no dry fire, if need be, do a slight pulse fire and wick and vape.

I use contact TI in my Billow V2 with no problem.

That said, back to the OPs original purpose - which was to sell his mod!

 

[BenJammin]

I use contact TI in my Billow V2 with no problem.

That said, back to the OPs original purpose - which was to sell his mod!

On what device?

 

[BenJammin]

Now you just said you were using Ti, you never stated that in any previous posts. Why don't you try a spaced coil, it will simply eliminate all your issues and you will save battery life because you can set your wattage lower. Not sure what kind of ohm's you are aiming for either. TC was invented with spaced coils bud, give it a try. I'm telling you all those issues will go away... Also a lot less coil gunk on spaced coils. Btw if your making a contact Ti coil, you are dry burning the coil to get the hot spots out I'm assuming. Ti should only be pulsed when firing dry, not to the point like you need it to be to ensure the heat is evenly distributed through the coil. This is another reason I say spaced Ti still, no dry fire, if need be, do a slight pulse fire and wick and vape.

Again... assuming I don't know the risks of Ti wire... I KNOW ALREADY! I drop 'er down to 6w and pulse... squeeze and pulse... the coils turn blue... guess what? Blue Ti is just fine...

 

[AmandaD]

On what device?

On my SX Mini M class. My coils come in at 0.15 running at 35J and 515F! (Yes, I also pulse mine first till blue)

 

[BenJammin]

On my SX Mini M class. My coils come in at 0.15 running at 35J and 515F! (Yes, I also pulse mine first till blue)

This has Ti mode though... which makes the mod read correctly with Ti...

 

[IngrownClouds]

Btw I have written and in depth review of TC and

Again... assuming I don't know the risks of Ti wire... I KNOW ALREADY! I drop 'er down to 6w and pulse... squeeze and pulse... the coils turn blue... guess what? Blue Ti is just fine...

Again, no need for that inflection bud. I commented to just give a little advice, not saying you were a dumbass or anything like you're taking it.

If you have issues with one way, what is so wrong with trying another? Gl on selling the Hana mod.

 

[AmandaD]

This has Ti mode though... which makes the mod read correctly with Ti...

Yup! Hold on while I try it in Ni mode - back in a sec.

 

[IngrownClouds]

This has Ti mode though... which makes the mod read correctly with Ti...

Look man, I'll try to help one last time, just don't be a dick.

What happens when you vape at 40w compared to the 25w you're at now?

 

[BenJammin]

Look man, I'll try to help one last time, just don't be a dick.

What happens when you vape at 40w compared to the 25w you're at now?

I'm at 25w on my single coil Subtank plus now... but on the B2 the only difference was it started spitting a little bit faster

Altho, I'm still not asking for help, so idk why you keep trying to...

 

[AmandaD]

I turned it all the way down to 310 in Ni mode and had to also reduce the joules to 25 to get a similar vape! But I'm not entirely sure the taste is the same (it tastes close to burning - probably have to turn it down even further).

I also find that a Ti mode is still better for Ti coils on the whole, but it does depend a lot on the build. I have a STM Ti build that's working very well on the sigelei 75 at the moment, so it all seems to depend!

 

[Mike H.]

I hate spitters

 

[IngrownClouds]

Single coil Ti build in the RBA section?

I'm at 25w on my single coil Subtank plus now... but on the B2 the only difference was it started spitting a little bit faster

Altho, I'm still not asking for help, so idk why you keep trying to...

Lol dude, I was just trying to get you to be able to enjoy your B2 and use it, seeing as somehow you can't.

Take the contact out, wrap 5 spaces on the 3mm ID and you won't put down that B2 I bet.

 

[cobalt327]

Altho, I'm still not asking for help, so idk why you keep trying to...

Maybe, but look at all the bumps you're getting! Pretty sound advice in any event. Spaced coils ftw, IMHO.

 

[georgemeadal]

moving this thread to coils section...stop spitting at each other

 

[Heather]

What are you looking for @BenJammin ? I would like to try that mod.

 

[BenJammin]

What are you looking for @BenJammin ? I would like to try that mod.

Preferably a TC mod with 60+watts and has Ti mode... but PM me with offers and I'll entertain them

 

[BenJammin]

bump

 

[cobalt327]

Anyone have a list of all mods that have a Ti mode?

 

[cavtruper]

Maybe, but look at all the bumps you're getting! Pretty sound advice in any event. Spaced coils ftw, IMHO.

Withdrawn... Sorry to crap in your ad Benjamin.

 

[cavtruper]

Anyone have a list of all mods that have a Ti mode?

Negative but don't be looking for the Sigelei 150 TC on it

 

[cobalt327]

How dare you!!!! He has 2000+ posts! Benji, take some advise and at least try it. We are here to learn, especially on new stuff like TC right?

WTF? I have no idea what you're getting at.

Negative but don't be looking for the Sigelei 150 TC on it

On what? Are you trying to tell me the S 150TC doesn't have Ti mode? If that's the case, it's odd you'd pick THAT mod out of hundreds that also don't have Ti mode... anyway, maybe typing "...but don't be looking for it (Ti mode) on the Sigelei 150 TC" would have gotten the point across a touch better.

You had your coffee yet today???

 

[cavtruper]

Look above and you might pick up my first comment or it could stay above your head and between your legs....

The sigelei doesn't "officially" support TI meaning turn the degrees down

More coffee for you, sir!

 

[cobalt327]

Look- I don't give two shits about your segelei. And your "response" makes zero sense either. Do all a favor and get back on your meds. Or better- just leave me the fuck alone.

 

[BenJammin]

Sold locally. Please close...