Become a Patron!
Hammer of God V2 box mod with Temple RDA $190
- Thread starter wrxnefx
- Start date
How heavy and bulky does it seem to be in the hand? I was lurking on some dealers and saw one of these and my interest peaked and if its not obnoxiously massive then Ill definitely pick one up for some of my crazier builds.
It's not bad in the hand and I have small hands. I just want something I can put in my pocket. The way this mod hits and having really good battery life more than makes up for its size.
UncleRJ
Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Reviewer
Moderator
Do you have a selling price in mind?
S&H charges?
Payment method?
Hell, I got a $10 bill in my pocket that ain't doing anything at the moment.
Is that OK with you and should I PM you my shipping address?
S&H charges?
Payment method?
Hell, I got a $10 bill in my pocket that ain't doing anything at the moment.
Is that OK with you and should I PM you my shipping address?
Do you have a selling price in mind?
S&H charges?
Payment method?
Hell, I got a $10 bill in my pocket that ain't doing anything at the moment.
Is that OK with you and should I PM you my shipping address?
I just updated the title with a price. I'll pay for shipping if I get the selling price. I would like the payment to be via PayPal.
Add 180 more and I'll throw in 50 ft of 20g kanthal!
Uggg having an issue with mine. I bought 2 of the v2's.
The first one starting automatic firing after the negative came loose...
Second one I noticed after building my twisted messes with a .12 duel coil that it feels like I have a 9volt battery touching my mouth.
Its like the negative is not grounded property.
So from what I have seen on line, I am not the only one having this issue with my mod.
I seen somewhere I could send them out but not sure where and if I have to pay for them to be fix safely.
Any thoughts where?
A link if you can help please!
The first one starting automatic firing after the negative came loose...
Second one I noticed after building my twisted messes with a .12 duel coil that it feels like I have a 9volt battery touching my mouth.
Its like the negative is not grounded property.
So from what I have seen on line, I am not the only one having this issue with my mod.
I seen somewhere I could send them out but not sure where and if I have to pay for them to be fix safely.
Any thoughts where?
A link if you can help please!
The HOGv2 is a Para-Series box, and you're sending 8.4V directly to that coil, a 0.12ohm. That is why it feels like that, your build is far too low for that much power, you have to build higher for series boxes. I'm sure @robot zombie or @raymo2u can chime in with more specifics, maybe some build ideas that would be suitable for your purposes.
Yea it can handle it since it a Series Parallel but its waay to much for a Vape....I would build around .4-.6 but I like my vapes warmer then most people.
Build some Fused Claptons, 7-10 Wrap with a 3mm diameter and that would be a great vape on a HOG V2, just make sure you can fit it in the RDA...
Fused Claptons helps with wicking aswell as the wider diameter coil, with 8.4V you need more juice or you will get dryhits within a second or two.
Beat Robot this time....That fucking Zombie always writing posts that leaves nothing else unanswered...Ill show him one of these days
Last edited:
You just got lucky... ...I was busy with my day job. In this economy, it is sometimes necessary for zombies to work daytime hours. Sad, but true. This is the world we live in. But since I don't sleep and I can't feel pain, this war remains as one that you cannot possibly win. It was just unfortunate that I could only be online for 16 hours today. If not for that, I would've won. I'm not rotting away over it. ;;Yea it can handle it since it a Series Parallel but its waay to much for a Vape....I would build around .4-.6 but I like my vapes warmer then most people.
Build some Fused Claptons, 7-10 Wrap with a 3mm diameter and that would be a great vape on a HOG V2, just make sure you can fit it in the RDA...
Fused Claptons helps with wicking aswell as the wider diameter coil, with 8.4V you need more juice or you will get dryhits within a second or two.
Beat Robot this time....That fucking Zombie always writing posts that leaves nothing else unanswered...Ill show him one of these days
Ummm, ahem...
...unless that .12 is something stupidly-ginormous, like say... ...a dual 28/20 fused clapton, it just ain't gonna hold up to that 500w blast. Yes, you read that right. The theoretical wattage (assuming no drop) is actually 588w. Even assuming a drop of 1 whole volt (which I think is reasonably generous under that sort of amp load,) you're still passing 450w. And again, assuming that 1v drop, you're looking at a 60A+ draw (30 from each series pair.) This probably explains why it feels like it's electrocuting you. That's a lot of fuckin' power, man!
I would try upping the resistance to a minimum of .3. With the amount of current and voltage ripping through that .12 setup, I could see some of it easily finding its way out of the circuit path. The only question is where it will arc. With that much voltage and current, you're begging for that mod to short on you. You'd be lucky if you just fried it.
And even if its not arcing, .12 is ridiculously low for series. That's really redlining it. It's risky biznu. Just build a big ole macro .3 and vape at 170w like a normal person!
raymo2u's right on with his advice. Mid-sub-ohm, large diameter, multi-wire coils of any variety will do much better than any kind of .12 on that mod. Twisted, helix, standard claptons, and fused claptons all work well. My personal preference is to do small standard claptons that pull less power and capitalize on the voltage boost to improve battery life, though you could also just build big power-suckers that vape furiously hard if you have the airflow. Either way, you don't have to make that box work hard to get a hard-hitting vape. It pushes quadruple the power per ohm (double current and double voltage,) so it can turn a mild build into a ferocious dragon all on its own.
Realistically, I would advise you to start as high as .8 (in a dual configuration) and work your way down. High voltage does not fuck around!
Last edited:
Thats alright, I dont think anyone will respond either way. Just was leaving tips for the person mentioning there insane build on his series box and wanted to tell him how to make it a bit more tolerable.
Thanks for all the help everyone. I am not new ... Please understand that. My normal everyday vape built is as I put on my HOGV2. In fact my twisted messes was pulled from another mod built with a standard Clapton. 1 x 28 A1,1 x 30 N60,1 x 32 N60 wrapped 6 on a 2.5 mm staged heated with a 24 A1 reads 1.2- 1.5You just got lucky... ...I was busy with my day job. In this economy, it is sometimes necessary for zombies to work daytime hours. Sad, but true. This is the world we live in. But since I don't sleep and I can't feel pain, this war remains as one that you cannot possibly win. It was just unfortunate that I could only be online for 16 hours today. If not for that, I would've won. I'm not rotting away over it. ;;
Ummm, ahem...
...unless that .12 is something stupidly-ginormous, like say... ...a dual 28/20 fused clapton, it just ain't gonna hold up to that 500w blast. Yes, you read that right. The theoretical wattage (assuming no drop) is actually 588w. Even assuming a drop of 1 whole volt (which I think is reasonably generous under that sort of amp load,) you're still passing 450w. And again, assuming that 1v drop, you're looking at a 60A+ draw (30 from each series pair.) This probably explains why it feels like it's electrocuting you. That's a lot of fuckin' power, man!
I would try upping the resistance to a minimum of .3. With the amount of current and voltage ripping through that .12 setup, I could see some of it easily finding its way out of the circuit path. The only question is where it will arc. With that much voltage and current, you're begging for that mod to short on you. You'd be lucky if you just fried it.
And even if its not arcing, .12 is ridiculously low for series. That's really redlining it. It's risky biznu. Just build a big ole macro .3 and vape at 170w like a normal person!
raymo2u's right on with his advice. Mid-sub-ohm, large diameter, multi-wire coils of any variety will do much better than any kind of .12 on that mod. Twisted, helix, standard claptons, and fused claptons all work well. My personal preference is to do small standard claptons that pull less power and capitalize on the voltage boost to improve battery life, though you could also just build big power-suckers that vape furiously hard if you have the airflow. Either way, you don't have to make that box work hard to get a hard-hitting vape. It pushes quadruple the power per ohm (double current and double voltage,) so it can turn a mild build into a ferocious dragon all on its own.
Realistically, I would advise you to start as high as .8 (in a dual configuration) and work your way down. High voltage does not fuck around!
Wait, is that what you were putting on the HOG? You said ".12" earlier, which is what prompted our responses.
My bad for getting carried away, man. Didn't mean to treat you like you didn't know what you were doing. I thought you were running a .12 on a series mod!
Well ...? Being a guy..lol I gave it a run. BOY was I wrong.. But I will be building a .3..ish . Thanks to all that helped me getting my 9 volt taste issue figured outMy bad for getting carried away, man. Didn't mean to treat you like you didn't know what you were doing. I thought you were running a .12 on a series mod!
.3 may till be a bit high, If I were you I would make it slightly more mild with a .5-.8 Ohms, that .3 in series is still pretty hardcore....
I rock super subohm most of the time and that would still be too much for me, and I love scolding hot vapes...
I rock super subohm most of the time and that would still be too much for me, and I love scolding hot vapes...
You can also build double barrel coils to use more of the space and add to the amount of wraps you can use, also will help with raising your resistance. Good luck on finding what works for you!