I just built my first parallel build all kanthal and it taste burnt but the cotton isn't burnt and has loads of jucie on it. Any help?
Sent from my SM-G928V using Tapatalk
Sent from my SM-G928V using Tapatalk
Forgot to say its 26ga/5wraps .20ohmsI just built my first parallel build all kanthal and it taste burnt but the cotton isn't burnt and has loads of jucie on it. Any help?
Sent from my SM-G928V using Tapatalk
Yea give me a sec and get back home I got some but bad ones lol 20min and I'll upload themPHOTOS??
VAPE ON
No snow wolf at about 45-50wattsAre you on a mech mod?
VAPE ON
So.if they overlap they will taste burntCheck ur coils bro, make sure they don't over lap
VAPE ON
The cotton is just right in there but is there a special way to wick it?Since its ur first built, it has to be they way you wrap it....
Less cotton?
Wicking?
Clean ur atty?
VAPE ON
What's the diameter of ur coilsThe cotton is just right in there but is there a special way to wick it?
Sent from my SM-G928V using Tapatalk
Well I guess it could be bunched up lol idk I guess I can rewick it is there a particular way to wick itHow tight is your cotton threaded through it, if it bunches up at all when tugging it its too tight for that build, also when you first start vaping it may taste all kinds of weird, then it will taste fine after a bit. Parallels are great, high heat/lots of flavor and vapor and easy to build.
Not really, look up Scottish Roll Wicking Method on youtube or google and thats how you should wick every RDA build....The cotton is just right in there but is there a special way to wick it?
Sent from my SM-G928V using Tapatalk
BEAUTIFULNot really, look up Scottish Roll Wicking Method on youtube or google and thats how you should wick every RDA build....
Should look like this (The Wick, not the build)
Click this Link to see moreBEAUTIFUL
VAPE ON
That's my problem I stuff the cotton up under the coils lol sorry I'm a newbieI roll the cotton then thread it through then use tweezers to see when the cotton would only touch the deck and cut it right there, so only the end tips touch the deck. I dont suggest placing them under the coil at all as you want as much air running around the coil as possible(I dont think you can put it under in your RDA anyways). I also will Fluff the tips as much as possible with a Exact-o Knife or my Tweezers before use, this makes sure the cotton isnt bunch up and makes it free flowing to the coil.
Click this Link to see more
3mm Japanese cotton and not reallyWhat's the diameter of ur coils
What kind of cotton?
Not too tight, not too loose
VAPE ON
Thats why we help, everyone starts from the beginning! With a bit of practice you will have the wick and builds down in no time, I replied to your other thread btwThat's my problem I stuff the cotton up under the coils lol sorry I'm a newbie
Sent from my SM-G928V using Tapatalk
Yea I saw it lol that was a disaster of a fused Clapton idk what I was thinking lol that's why I tried the parallelsThats why we help, everyone starts from the beginning! With a bit of practice you will have the wick and builds down in no time, I replied to your other thread btw
Try Twisting the Wire until there is 3-5 ridges every half inch, wrap your coils, then while your twisted coil is on what your wrapped it on take a single strand of the same of thicker wire and wrap it between the twisted wraps. You will have a Twisted and Staged Heating Coil Build...Its easy and will give you great Results!Yea I saw it lol that was a disaster of a fused Clapton idk what I was thinking lol that's why I tried the parallels
Sent from my SM-G928V using Tapatalk
Try Twisting the Wire until there is 3-5 ridges every half inch, wrap your coils, then while your twisted coil is on what your wrapped it on take a single strand of the same of thicker wire and wrap it between the twisted wraps. You will have a Twisted and Staged Heating Coil Build...Its easy and will give you great Results!
Something Like This:
Sent from my SM-G928V using Tapatalk
Ive been building for just over a year though...I didnt start with a RDA either. I started by rebuilding Kanger Subtank and Aspire Atlantis Boilheads which are small and hard to work with compared to RDA's. I got pretty good at rebuilding them and then I bought a Hobo V2.1 RDA, which is one of the smallest decks to work on. I got pretty good at rebuilding that and jumped to a Twisted Messes RDA and have dont bigger builds and experimented much more.. Definitely looks like poo compared to yours lol
Sent from my SM-G928V using Tapatalk
Watch this, when you put your Parallels in use a low wattage or pulse them lightly and LIGHTLY pinch them or strum them like a guitar to get out hotspots, this will let them stay in the perfect shape:. Definitely looks like poo compared to yours lol
Sent from my SM-G928V using Tapatalk
OK I'm about to make new ones lolDude you have to re wrap those coils,, and it looks like u don't have enough cotton try to push those in the middle dude
VAPE ON
Yea I made some before I'm looking for flavorYou can always just do a Twisted wire build instead of a Prallel if they get you down, t has the same effect and lowers your resistance-higher heat, more surface area and flavor/vapor production. They are simple to make and vape very well.
View attachment 36496
Cant beat a Fused Clapton for Flavor...and once you try them theres almost no going back...Yea I made some before I'm looking for flavor
Sent from my SM-G928V using Tapatalk
I feel you there. Davis, did you get your problem sorted out?Cant beat a Fused Clapton for Flavor...and once you try them theres almost no going back...