RX200 and Herakles Plus

[dud3r]

Can't figure this out. Bought two new Herakles and neither one of them will stay in SS mode. It'll let me select it once. Then fire. Goes back to power. My girlfriends cube 2 does the same thing.


Sent from my iPad using Tapatalk

 

[rolltidevaper]

Which coil heads are you using. I have the H Plus and have not had any problem running it in SS Temp Control Mode. Well, let me take that back a little. I did have a problem with the original coil, but found out that when turning the juice flow control it would somehow loosen the coil head a little. Once I tightened it down, no more issues. I have run it on the RX200, Cuboid and Vaporflask Stout (all have basically the same Joyetech board). Also, make sure you have done the update on the RX. The first update was almost entirely related to TC with SS. Best of luck!!!

 

[skt239]

.4 coil is kanthal
.2 is stainless
You want to use the .2 for SS TC.
Which are you using?

 

[dud3r]

Are you sure skt?


Sent from my iPhone using Tapatalk

 

[skt239]

Are you sure skt?


Sent from my iPhone using Tapatalk

I have 5 of them, including the V2. Its my go tank and I use one everyday. I'm 100% certain of it. Which coil are you using, the .4 or .2? You never answered that...

 

[dud3r]

I was trying to but the app crashed. Turns out my coils were mislabeled so I thought they were all the .4. Your comment made me double check the spares.

Sent from my iPhone using Tapatalk

 

[skt239]

Ah ha, there is the issue. The box says 316L and someone wrote .4, so what's inside? You can also verify which you are using by checking the actual coil...

 

[dud3r]

The coil is reading at .22. The coils themselves only day 316l and 35-80w. But they were obviously mislabeled. I knew the 316l was right so I bought them lol.


Sent from my iPhone using Tapatalk

 

[skt239]

The coil is reading at .22. The coils themselves only day 316l and 35-80w. But they were obviously mislabeled. I knew the 316l was right so I bought them lol.


Sent from my iPhone using Tapatalk

So are you still having issues using SS TC?

 

[dud3r]

Not from the rx. The cube is still going right back to watt mode.


Sent from my iPhone using Tapatalk

 

[skt239]

Not from the rx. The cube is still going right back to watt mode.


Sent from my iPhone using Tapatalk

Have you tried more than one coil in the cube? Does the cube have an option to select wire type? The Herakles plus coils are triple parallel and can make certain devices act a little wonkey..

 

[dud3r]

The Crown, the Rafale, and TFV4 all work. I think it has something to do with the triple parallel coil.


Sent from my iPhone using Tapatalk