Mini Volt improvement

[fckaugust8th]

Hi all, just had to ask those with the background and experience. Can you improve the CoV Mini Volt? This is what I'm talking about: the Mini Volt has a 1300mAh Li built-in battery that I think it is more like 1200mAh. I am thinking about a Li-Po around 2000mAh.
The battery installed looks like a 18400 or 18500, at least size wise. I have no experience with this part of the vaping world and that's why I'm asking you here.
Thanks

 

[Vapomizer]

i don't see why not, if you can fit a similar size high drain lipo inside i do not see why it won't work, you just have to make sure that it has similar or higher amp rating like the one inside and that it would fit, that is all!

I am not an expert in Lipos, just my 2 cents

 

[fckaugust8th]

i don't see why not,

That was my thinking too, I just thought I ask first.

 

[vuJim]

Charger's built in. Whatever you put in there has to be handled appropriately by the charger, or the results could be undesirable.

 

[fckaugust8th]

I kinda figured so. Thank you for the heads up.

 

[Vapomizer]

Charger's built in. Whatever you put in there has to be handled appropriately by the charger, or the results could be undesirable.

Every battery has a standard charge rating and a fast charge rating, if the current batteries are rated at same or below the fast charge rating of the ones he intends to install it should work and charge without an issue, i just doubt the value of that mini volt tiny box, a 1300mAh 40W mod? what is the difference between that and any other pin-style sub-ohm kit like the Kanger SUBVOD, the eGo ONE or the SMOK ONE?

 

[fckaugust8th]

pin-style sub-ohm kit like the Kanger SUBVOD, the eGo ONE or the SMOK ONE?

The value is STEALTH. With a properly built tank like Kabuki, Pico, Goblin nano, Goblin mini or even a Derringer, it fits very nicely in your shirt pocket and you don't have to worry about it tearing it in the next hour or so. Admittedly, you'll not be chucking clouds, it is not a cloud chaser's mod by any stretch of the imagination, it is for those of us looking for a flavorful vape without creating a fog bank!

 

[fckaugust8th]

I found a thread on the other forum and what I'm getting is that the optimal resistance for it is between 0.8 and 1.2 ohms. I gave a Pico at 1.5 ohms on the black mini volt and a kabuki clone at 2.5 ohms on the red mini volt. The kabuki is outfitted with the nautilus RBA.

 

[Pancho_Brown]

I found a thread on the other forum and what I'm getting is that the optimal resistance for it is between 0.8 and 1.2 ohms. I gave a Pico at 1.5 ohms on the black mini volt and a kabuki clone at 2.5 ohms on the red mini volt. The kabuki is outfitted with the nautilus RBA.

How's your battery lasting you at 1.2 ohms?

 

[fckaugust8th]

Realistically, I have a charging cable on my computer at work so I recharge once each but I do vape a bit during the day.