I have the Sig 213, but my Aromamizers are still in the mail.....once they get in I'll snap a picture to show the overhang...one with sleeve and one w/o.
We need more pictures of this tank on different mods to see how bad overhang wil be
Become a Patron!
30mm SUPREME RDTA/RDA PLUS
- Thread starter ej1024
- Start date
Had mine for a week or longer now love it an the new mod ,
Sent from my ONEPLUS A3003 using Tapatalk
No over hang , just slight curves of the front face plate, but thats because it has rounded edges other wise id say it fit perfectly
Triade as usual no overhang previously posted via mod father an such
Last edited:
Thats my next mod, been meaning to order it for a couple weeks and keep getting something different for some reason, had it in the cart yesterday but switched it to the finder 250 instead, I definitely need a new lipo box
Had mine for a week or longer now love it an the new mod ,
Sent from my ONEPLUS A3003 using Tapatalk
I got mine on a pre order then used a code So got it at a great deal in hind sight i wish i had Ordered 2 now since I only paid 86£ for mine
, The Supreme plus is awsome vape but dam my threads are Jamming took me 2hrs to strip my tank down on recipet ,
The base has no grip or knurling so would not undo ,or not allow a decent Grip ,
Going with thin bezels it looks good but has no where to get a grip so will need pliers to actually grip these parts ,
Maybe i just got tight threads on mine IDK , but it's frustrating me when i need to refill im having to hold the glass still an dump in my juice them screw on the two top parts as there fused as one constantly ,
Needs pliers to separate them , not good can seen my marking or damaging my tank finish at some point , im at my misses an now need to go hom to get some tools to undo it ,again
Will need to keep my threads extremely loose or something IDK , maybe not a problem for others , but had this Problem as soon as was taken out of its box New , an has remained since i did juice up the threads in hope would help them , Nope its fused together again ,
Maybe its just mine , or maybe its a common thing not reported yet who know , ????
my top cap refill keeps jamming onto the small thin part with logo underneath it forcing the whole tank to undo , realease juice everywhere ,
Not good
, ive just emailed the Steam crave , To ask if they would concider adding Knurling to these two parts for grip
The mod is excellent by tbe way , the vape from the tank is excellent , just do not like tiny mm thin bezels that cannot be gripped to undo , or maybe ive just got tight threads , on my parts time will tell if other report the same this will mean looks over function was there route , it makes it a lot worse
When theres juice on the outer tank or hands , making things impossible ,
Yes Iam allowed to be , Im critical of things because im paying my hard earned money
££$$€€ for them unlike many testers /Reviewers who get them free ,
An worried of they say the bad points there free goods would stop.
Ive product tested prototypes myself an given the same criticism for the sane dam thing just recently why go for extremely thin bezels an no Knurling or grip , either add Knurling or make it wider to grip id go for functions over looks 9/10 times every time ,
I want to be able to refill my tank with the whole top an glass coming apart ,
Sent from my ONEPLUS A3003 using Tapatalk
Last edited:
No tanks sit down flush on the LUX, it has a raised section around the 510
That means there will aways be a gap between the tank and top of the mod.
At first it bugged me but the positives on the LUX outweigh the cons
Sent from my SM-N910P using Tapatalk
I got mine on a pre order then used a code So got it at a great deal in hind sight i wish i had Ordered 2 now since I only paid 86£ for mine
,
The Supreme plus is awsome vape but dam my threads are Jamming took me 2hrs to strip my tank down on recipet ,
The base has no grip or knurling so would not undo ,or not allow a decent Grip ,
Going with thin bezels it looks good but has no where to get a grip so will need pliers to actually grip these parts ,
Maybe i just got tight threads on mine IDK , but it's frustrating me when i need to refill im having to hold the glass still an dumo in my juice them screw on the two top parts as there fused as one constantly ,
Maybe its just mine , or maybe its a common thing not reported yet who know , ????
my top cap refill keeps jamming onto the small thin part with logo underneath it forcing the whole tank to undo , realease juice everywhere ,
Not good, ive just emailed the Steam crave ,
To ask if they would concider adding Knurling to these two parts for grip
The mod is excellent by tbe way , the vape from the tank is excellent , just do not like tiny mm thin bezels that cannot be gripped to undo , or maybe ive just got tight threads , on my parts time will tell if other report the same this will mean looks over function was there route , it makes it a lot worse
When theres juice on the outer tank or hands , making things impossible ,
Yes Iam allowed to be , Im critical of things because im paying my hard earned money
££$$€€ for them unlike many testers /Reviewers who get them free ,
An worried of they say the bad points there free goods would stop.
Ive product tested prototypes myself an given the same criticism for the sane dam thing just recently why go for extremely thin bezels an no Knurling or grip , either add Knurling or make it wider to grip id go for functions over looks 9/10 times every time ,
I want to be able to refill my tank with the whole top an glass coming apart ,
Sent from my ONEPLUS A3003 using Tapatalk
Mine was tight as hell too
Last edited:
The overhang is brutal on a hohm sliceAnybody have one of these with a Hohm Slice or Sigelei 213?
Curious how it looks, especially top down with the overhang, before i pull the trigger
Not so great on a Smok Alien as well
Not great but not bad on the 213
Sent from my SM-N910P using Tapatalk
Try undoing it once juice is on there just one drop an skid slip city lol , why did they tighten them so much ,
But mine is still getting hard to undo whilst in use
Sent from my ONEPLUS A3003 using Tapatalk
Will need to carry a set of pliers woth me ,an if i get stooped whist im out i get acussed of going equipped lol
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Mine was at first but after the 1st assembly and cleaning it hasn't got stuck since
Sent from my SM-G935V using Tapatalk
I'm going to Order a spare battery at some point , since its a 1500Mah lipo an user replaceable , just 4 allen key screws, to remove , then when can be bothered waiting 40 mins for recharge 2 min swap out, but good to have a turnigy spare,
Sent from my ONEPLUS A3003 using Tapatalk
Theres time yet , was great first week now just come home for pliers , lol
Sent from my ONEPLUS A3003 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Just use pliers on the inside by the fill holes. Don't use the teeth part just open them and put them across the holes to hold that piece in place. Then use plastic or rubber pliers on the outside part of the top cap and twist
Sent from my SM-G935V using Tapatalk
The metal tank size has been reduced by like 40% on a bigger tank why ?
Look at the lack of metal under the top cap ,
Its ok its done now Fucked up ,
top cap an under is stuck together , nothing to grip on to help undo it ,
Now it broken i can get it undone
Sent from my ONEPLUS A3003 using Tapatalk
Look at the lack of metal under the top cap ,
Its ok its done now Fucked up ,
Now it broken i can get it undone
Sent from my ONEPLUS A3003 using Tapatalk
First tank out of owning over 40+ ive ever broken , , deffo they reduced the metal banding under top cap by like 40% taken away Knurling from the base , should of added Knurling to under top cap where it says Supreme RDTA , as sod all to grip on when its keeps jamming tight ,
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
That sucks @benley73 , sorry to see that happened.
Luckily mine hasn't gotten stuck but I see what you mean about more metal being needed around that top cap.
Have you contacted steam crave yet? I definitely would to get a replacement. You must have had a defect, I have taken mine off about 5 or 6 times with no problem at all, just tried it right now, came off easily.
Sent from my SM-N910P using Tapatalk
Luckily mine hasn't gotten stuck but I see what you mean about more metal being needed around that top cap.
Have you contacted steam crave yet? I definitely would to get a replacement. You must have had a defect, I have taken mine off about 5 or 6 times with no problem at all, just tried it right now, came off easily.
Sent from my SM-N910P using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I agree more metal would be nice but how did u break it? Best way to seperate it is the way I listed above
Sent from my SM-G935V using Tapatalk
Hmm ?? If you cant get it undone how do you get pliers into the fill holes since top cap is jamned on covering them fill holes and everything os just stuck , with no way of undoing , had the same problem for 2 hrs when i fist got it ? ,
Sent from my ONEPLUS A3003 using Tapatalk
Thats kind of been the problem when i say its jammed shut tight an top cap jammed , too , only thing that turned was the airflow ring
The might of added an not functioning Optical illusion to the top cap but reduced it from under the top cap holding the glass an the top cap is Jammed to this part ,
lol definitely not more , obviously less its like 3mm thick / wide to grip onto under top cap ,so even tank grips are to fat
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
You undo the whole thing. Obviously tank should be empty and you'll be left with the 2 parts on the top stuck together but no glass in the way. Then you go in from the bottom with the pliers like you would open a 55 gallon drum and for the top cap use a rubber band or plastic part of the circle style ceramic tweezers if you have them.Hmm ?? If you cant get it undone how do you get pliers into the fill holes since top cap is jamned on covering them fill holes and everything os just stuck , with no way of undoing , had the same problem for 2 hrs when i fist got it ? ,
Sent from my ONEPLUS A3003 using Tapatalk
Thats kind of been the problem when i say its jammed shut tight an top cap jammed , too , only thing that turned was the airflow ring
Sent from my SM-G935V using Tapatalk
Just received my gm 30mm supreme. I have not built it yet but from first look. It seems to be a really nicely built tank. Nice weight and feel. Ill probably end up building it later tonight. Really excited to vape on it. I love my supremes. Ill keep you posted on how i like it once i have a tank through it.
You guys had me wondering if mine were stuck together. Opened both boxes and stripped the tanks down for a cleaning. They definitely could use more knurling, but I didn't have any problems taking them apart.
Will wick these babies up tomorrow......
Will wick these babies up tomorrow......
Anthony, did you notice two pieces of rubber in the juice box from That1Vape? I'm not sure what they're for, but they certainly could be used for a grip on tight bottle tops or atty parts.
Did you get those pieces of rubber in your box from T1V?
To get it apart to get another glass in there try putting it in the freezer for a few minutes.The might of added an not functioning Optical illusion to the top cap but reduced it from under the top cap holding the glass an the top cap is Jammed to this part ,lol definitely not more , obviously less its like 3mm thick / wide to grip onto under top cap ,so even tank grips are to fat
Then tap the edge on the counter or something and use rubber jar removers.
Work those threads for a few minutes before reassembling it all.
Good luck
You obviously shouldn't use a torch on it (even if it's pissed you off enough to) so instead try soaking it in scalding water before popping in the freezer for 30 sec or a minute. If that doesn't work the try the opposite. The different masses of metals will heat/cool at different rates. One method will probably make it tighter, the other should make it fit looser.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I don't remember seeing any rubber in the box but I could have thrown it out by accident
Sent from my SM-G935V using Tapatalk
I'll post a picture of what I'm talking about tomorrow, when I get the atty coiled.
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
That will work great on My new 500W regulated mod!
20mls not enough?
Here's 40mls
Sent from somewhere in Vietnam.
My first one came in and though others already posted it on the Sig 213, let me add my pictures
There is indeed some overhang, and it does bother me a bit.....mmhh maybe splurge for the G class after al.....
Currently I have no other mods that will even remotley fit it, but I have a Aspire NX100 comming in, and wil take a picture once that one is in. I think it will overhang a bit on the front with the Aspire, but we'll see how bad it is.
Next to it's smaller siblings:
https://postimage.org/app.php
10ml and 5ml:
https://postimage.org/
https://postimage.org/
There is indeed some overhang, and it does bother me a bit.....mmhh maybe splurge for the G class after al.....
Currently I have no other mods that will even remotley fit it, but I have a Aspire NX100 comming in, and wil take a picture once that one is in. I think it will overhang a bit on the front with the Aspire, but we'll see how bad it is.
Next to it's smaller siblings:
https://postimage.org/app.php10ml and 5ml:
https://postimage.org/
https://postimage.org/
Suppose you could add a larger mod gaurd an make its hole larger to fit the outer rings , it would then get rid of the ring gap ,No tanks sit down flush on the LUX, it has a raised section around the 510
That means there will aways be a gap between the tank and top of the mod.
At first it bugged me but the positives on the LUX outweigh the cons
Sent from my SM-N910P using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
Yes I know , I've had it jam a few times , the tank was sealed so tight right out of the box took 2 hrs to get the bottom off an deck out , The Top cap was tightly sealed too but did come off a little easier had to use pliers in the juice holes to come off
This time I was in a rush ,
The breaking of glass was my own fault Tbh , I know this , tried needle nose pliers on the small band with the band over the top hence the crushed glass,
but the top cap jamming is a common problem for many,
Its now been reported by quite a few different users now all saying the reduced metal under the Top cap is to small to grip on to ,
so is the lack of of metal to grip it,s by putting 40% less there than previous models ,Even though others claim more metal was used Maybe from overall size going 25mm to 30mm but reduced in width , under the top cap than on previous versions , making less to grip via hands , which should be the only way its used , TBH ,
Both top cap an below are only 3mm an when it jams 3mm is not enough to get a good grip or hold onto to undo. Not with the hands any way an that should be the only an proper way to grip and undo , not using a freezer , or tools , should be usable by hands only , anything less is a design or manufacturing flaw .
So its a steam Crave problem ,
You should not have to jump through all these steps ,
Just to be able to get the top cap off ,
To see the fill hole , it means its no good away from the home , unless your in a car with a tool box , or near a freezer ,
.
But could do with Knurling on the tank top under the top cap , maybe this should of been picked up via the product prototype testers , or steam Crave ,
(Ive only tested 1 prototype RTA myself an that was the first thing i reported , the top cap was too thin an no Knurling on top an Bottom ,
On a V2 /25mm RTA)
(by vapewiz/ UD hopefully they will ) an avoid these problems
I do like the tank a lot not used any other all week since it Arrived from my pre Order purchase.
apart from goon Lp on my Sqounker mod Coppervapes bf since i drilled out the post for Sqounking has a small 1.5-2mm under posts to allow Juices to the Deck ,
Sent from my ONEPLUS A3003 using Tapatalk
Ive found out now swapping out the Orings to rhe clear silicone ones helped it from sticking some what , im not the only one who has had this problem , any ways it's working fine now just not putting top cap on tight from now one since Enough Oring an not leaked at all So alls good , I do like the tank ,
Sent from my ONEPLUS A3003 using Tapatalk
Sent from my ONEPLUS A3003 using Tapatalk
SirRichardRear
AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
I know your not the only one. We all got them stuck from the factory but after the 1st time I haven't had an issue. Sometimes things come overtight from the factory for sure. Extra metal or knurling would have helped as well
Sent from my SM-G935V using Tapatalk
You gonna love it... I havent been this happy with an atty since I got my first Boreas.
It's a beast @ 120W. Thick semi-cool clouds and tons of flavor.
4mm fused claptons @ .3Ω & rayon keeps up with 120W better than I can.
I dialed it down to 80W and it's reasonable & still tons of flavor.
I made the coils high enough to see daylight under them through the screen.
I pulled them towards the air and wicked almost full thickness rope of cellucotton.
I cut maybe 1/4 off the tails' thickness. I'll see within a day if that left enough to prevent flooding.
First impression is schwingggg!
4mm fused claptons @ .3Ω & rayon keeps up with 120W better than I can.
I dialed it down to 80W and it's reasonable & still tons of flavor.
I made the coils high enough to see daylight under them through the screen.
I pulled them towards the air and wicked almost full thickness rope of cellucotton.
I cut maybe 1/4 off the tails' thickness. I'll see within a day if that left enough to prevent flooding.
First impression is schwingggg!
Overhang?
Anyone using the 20ml conversion kit? That thing looks crazy.
I have a G-class on pre-order from varitube. I love the fact that I'll be able to throw my 30mm attys on there with no overhang. I have 3 30mm rta and a 28mm. I don't have a single mod that they fit on. They have the slightest overhang on my VN Boss 3000, and they don't look bad on my triades. But they will look perfect on the gclass. Can't wait. They should be shipping them out any day now. I'll post pics once I get it.yes it's very good, I have decided to spend $240 on the Yihi G class (once it comes to market) just to accomodate this atty, that should say enough
️