$34.9 Authentic Vaporesso SWAG II 80W VW 18650 Box Mod
SWAG II Battery Box Mod:
Dimensions: 50 x 25 x 75mm
Resistance: 0.03~5.0ohm
Output Power: 5~80W
Charging Current: DC 5V / 2A, Micro-USB
Display: 0.91 inch OLED Screen
Chipset: AXON Chip
Battery Type: 1 x 18650 (Not included)
Battery Compatibility: 510
$44.9 Authentic Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
$19.9 SXK Mission XV KRMA GEN Style 316SS Bridge RBA Atomizer w/ 5 Airflow Reducers for SXK BB / Billet Box Mod Vape Kit - Silver
Features
316 Stainless Steel KRMA Bridge
1mm, 1.5mm, 2mm, 2.5mm, 3mm Airflow Reducers
3.5mm Airflow Without Airflow Reducer
PEEK Insulators
Side Logo & Serial No
Contents
Fit for mouth to lung (MTL) vaping users
High End Drip Tip Customized 510 Drip Tip
SWAG II Battery Box Mod:
Dimensions: 50 x 25 x 75mm
Resistance: 0.03~5.0ohm
Output Power: 5~80W
Charging Current: DC 5V / 2A, Micro-USB
Display: 0.91 inch OLED Screen
Chipset: AXON Chip
Battery Type: 1 x 18650 (Not included)
Battery Compatibility: 510
$44.9 Authentic Ultroner Gather 22mm RDA/RDTA Rebuildable Dripping Tank Atomizer w/BF Pin 2ml
The RDA/RDTA comes disassembled with each part having it's own compartment and spares etc placed in a plastic tubular container.
Up top we have an Ultem 510 drip tip which fits to the flat top surface of the sleeve/top-cap. The Sleeve/top-cap is one piece for performance purposes but the Stabwood section is held in place by 2 notches and an o-ring so can be removed for cleaning purposes, made of Stainless steel with the mentioned gorgeous stabwood section towards the top gives the Gather quite a unique look. The sleeve has an airflow slot one side and some sort of writing (in signature form) the other in Silver. The colours of the stabwood section will be unique to each atty.
The deck comes pre-installed with a standard pin and to use the Gather as a standard RDA simply screw the base onto the 510 threading and the sleeve/top-cap get's used in the usual manner. To use as an RDA with BF pin simply unscrew the standard pin using the larger supplied hexagonal wrench and screw the BF pin in it's place.
If you want to use the Gather as a standard RDTA before screwing the base disc in place you need to screw the extension pipe onto the 510 threading which gives you some length of pipe and then new 510 threading. Now place the Ultem tube in place and screw the base disc over the threading, o-rings both secures and seals the Ultem tube section.
$19.9 SXK Mission XV KRMA GEN Style 316SS Bridge RBA Atomizer w/ 5 Airflow Reducers for SXK BB / Billet Box Mod Vape Kit - Silver
Features
316 Stainless Steel KRMA Bridge
1mm, 1.5mm, 2mm, 2.5mm, 3mm Airflow Reducers
3.5mm Airflow Without Airflow Reducer
PEEK Insulators
Side Logo & Serial No
Contents
Fit for mouth to lung (MTL) vaping users
High End Drip Tip Customized 510 Drip Tip