T
Taver13
Guest
will it blend was a youtube series it was advertisement for a blender, where they would see what it could blend, hockey pucks, golf clubs, iphones ect...look it up
Become a Patron!
D
Donald Bickers
Guest
ok ,,,got it,,,,,,
don't blend for shit
vapes like a mo fo
don't blend for shit
vapes like a mo fo
T
Taver13
Guest
wife is PMSing, had to run out for fucking gummybears
D
Donald Bickers
Guest
that's one thing good about being older
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
My wife loves me and is getting me a sigelei 100w plus soon
I've been doing my homework and it seems like the best option in our price range that hits everything on my personal checklist
T
Taver13
Guest
what are u using as an atomizer
D
Donald Bickers
Guest
I kinda agree,i go to about 15 watts max,but I like a warm vape,,,,I hit 30 last week just to see,all it did is burn for me,,,,10 watts works great for me ,good throat hit and good clouds,and to me that's where its at
T
Taver13
Guest
i just traded off my lemo, im not into the single coil thing, i was running it at 40 watts at one point with a .34 buld in it, the thing is great, i just prefer my duals, i like a nice hot vape
kayfuns i have noticed dont really enjoy high wattage. i just order a ivogo kayfun mini for the wife, i cant wait to screw with that thing
T
Taver13
Guest
for the lemo? i depends what device you will be using it on
T
Taver13
Guest
i found that unless your going crazy low, like under .2 with 22gauge, i wouldnt use a mech, your provari goes to 15 correct? i say try for a bit higher than 1.4, like around 1.8-2.0 with 28 gauge
I bought the mini several weeks ago. It's skinny and long, kinda unusual to anything I've used before. Haven't pulled it out if box yet.
Sent from my iPhone using Tapatalk
T
Taver13
Guest
well the lemo should be good for it
Why wouldn't you use a mech unless ohms are under .2 with 22g? I'm currently enjoying a .26ohm with 22g kanthol on my mech. Just curious. Not the greatest in electric knowhow.
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I think he was generalizing. Basically, the lower the ohm, the more amps drawn from the battery. If your not drawing enough power, there is no point using a mech. Get familiar with an ohm/watt/amp/volt calculator and it will make more sense.http://www.crownaudio.com/ohms-law.htm
For example, my build is running at .18ohm and my batteries have a max output of 4.2volts. This combination draws 98watts / 23amps
For example, my build is running at .18ohm and my batteries have a max output of 4.2volts. This combination draws 98watts / 23amps
T
Taver13
Guest
i was actually talking about for the lemo itself, and my experience on how it works, but yes in general,@Pauly Walnuts is correct
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
It depends on the box. If its a single 18650 box, yes.
If its a dual 18650 parallel (both positives up, both negatives down, 4.2volt), you will get better performance. Even though the voltage potential of a parallel box is the same, the internal resistance of the batteries gets cut in half (easier electricity flow). It doesnt double your battery's amp limit like some might think, but it does increase it by around 40%, from what I read.
If its a serial 18650 (stacked via wiring, voltage doubled to 8.4v) you need to go .4ohms and up or it will be waaaaaayyyyy too hot (like catch your cotton on fire hot). This does not double amp limits, though it allows higher ohm builds to draw more power and also halves the internal resistance of your batteries.
If its a dual 18650 parallel (both positives up, both negatives down, 4.2volt), you will get better performance. Even though the voltage potential of a parallel box is the same, the internal resistance of the batteries gets cut in half (easier electricity flow). It doesnt double your battery's amp limit like some might think, but it does increase it by around 40%, from what I read.
If its a serial 18650 (stacked via wiring, voltage doubled to 8.4v) you need to go .4ohms and up or it will be waaaaaayyyyy too hot (like catch your cotton on fire hot). This does not double amp limits, though it allows higher ohm builds to draw more power and also halves the internal resistance of your batteries.
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
My kayfun and protank didnt like higher power either.
T
Taver13
Guest
this
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I don't need the full wattage - I'm more interested in extended battery life vs the single 18650 in my Xpro bt50. I rarely, if ever, vape above 30watts but I want to be able to just grab one device when I leave in the morning for work and not need to carry extra batteries or worry if I've got a charging cable around.
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
On both of my boxes, serial and parallel, I get an entire day of battery life. I vape at full power, cloud chuckin, all freakin day. Although, Im not a chain vaper, I take two hits and put it down. Its really not bad, changing batteries once a day.
Oh yea, I just built a box. Lemme take a pic.
Oh yea, I just built a box. Lemme take a pic.
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Outside
T
Taver13
Guest
nice 50 amp switch ya got there
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
My 510 is from a broken ego battery, I milled my center pin with a piece of 8ga solid copper wire, file and drill. Crimped a solid copper collar to connect positive battery contacts to center pin. I made my own copper springs and its one solid piece all the way to the switch, triple shrink wrapped, and it also serves as a battery retainer. Only one solder joint from the switch to the 510 neg connection. I freakin hate solder, so I use as little as possible. The brackets for the positive connections are shelf hangers wich a hole drilled in them, and copper wire fed down through. 12ga solid copper wire I scavenged from my dads basement. The box and lid are from micheals craft store. The switch came from advanced auto (had to file down sides to fit)
It looks sloppy, but thats because it wasnt supposed to be pretty. The connections are solid and the 510 is straight. All copper everywhere. It hits like a train.
It looks sloppy, but thats because it wasnt supposed to be pretty. The connections are solid and the 510 is straight. All copper everywhere. It hits like a train.
T
Taver13
Guest
Faust
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Forgot to post my contribution to the box went out yesterday morning. I was the second person in line at the post office when they opened. Receipt said it should arrive friday.
If Momma ain't happy ...tehehehe
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Just got our January Zamplebox with this gem in there! It's like a boston creme donut chocolate and creamy pastry flavor.... soooooo delicious!
T
Taver13
Guest
that sounds fantastic!
T
Taver13
Guest
@anendeloflorien your package has arrived!
Can you change 1. @Thomas Castle Rock, CO
to
1. @Cruel-Phate Castle Rock, CO
He changed his name and it's driving me bonkers lol... Sorry I'm a bit OCD at times lol
to
1. @Cruel-Phate Castle Rock, CO
He changed his name and it's driving me bonkers lol... Sorry I'm a bit OCD at times lol
L
Lighty269
Guest
This stuff is great! shopmvg had a sale on it and I picked up 2 30ml for $20 on the way.
T
Taver13
Guest
yeah man ill get on that in a second
Shit...I meant to tell him about that yesterday when I updated my master contact list...I forgot to apparently. Thanks @BenJammin I appreciate it.
@Pauly Walnuts for a homemade box, I think that one is badass dude! I like it.
I like it.
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Mmmmmm just put a super basic single coil .64 ohm 26g micro coil (wrapped on an 1/8" drill bit) wicked with rayon in my magma. Holy shit, now I actually know why people rave about this thing. I'm tasting flavors in my VapeTree banyan tree that I never knew were there lol just felt like sharing
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Thanks man. Its my second homemade box, and its considerably nicer than the first. The next one will use three batteries and probably a mechanical switch to save space. Its fun, I like building stuff.@Pauly Walnuts for a homemade box, I think that one is badass dude!
T
Taver13
Guest
me too, let me show you what ive been doing to my orchid....
BIG ASS CHIMNEY 3/8 inch
drilled out airholes to 1/8th inch each
temporary big tank solution til i recieve more parts
this thing hits like a damn plume veil
Pauly Walnuts
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Yea!!! thats the shit! How did you attach the big chimney to the small chimney???
T
Taver13
Guest
i drilled out the cap to just a hair bigger than the new chimney, stuck it in sticking under about 2mm, and used some quick set epoky along the outside and kinda shaped it so it wasnt all sloppy
I'm glad there's a bunch of people here who like to tinker with nonworking mods. Made two piles last night. The good stuff for Pif box, and the stuff that never quite worked right for me. I will label all, so everyone will know the status of the unit. Especially since they will be thoroughly cleaned and in original box.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
T
Taver13
Guest
awesome, i cant wait to take something apart!
T
Taver13
Guest
so, me and the wife woke up today, fevers, chills, sore throats, coughing, one of the kids too, of course the little one. ugh. going to be a shitty day. going to have to find a soothing flavor to vape, if at all, dunno f my throat can handle it
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
So, I was having one of those mornings where all I want is a cigarette. It's cold and gross outside and I don't want to be at work! Decided to vape a little 18mg Prime G2 Vazilla in my magma instead..... Holy fucking throat hit batman. Don't want a cig anymore though!
T
Taver13
Guest
it always seems to happen that way, on christmas, we didnt even ope presents til like 1 in the afternoon, cause the whole house was sick in bed. the big one brought the damn thing home from school with him