Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
T

Taver13

Guest
ottoslaborworks said:
View attachment 23098View attachment 23099ask and you shall recieve, subtank mini chimney buildit was a little sloppy for the pic but once the housing was in place it cleaned up nicely no added air constriction and wicks nicely

Sent from my LGL41C using Tapatalk
Click to expand...
for it to be a chimney, the center of the coil needs to be open and the wick around the outside, kind of like the way atlantis and delta coils heads are
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
for it to be a chimney, the center of the coil needs to be open and the wick around the outside, kind of like the way atlantis and delta coils heads are
Click to expand...
Shit really, all the videos i watched in the past did chimney builds with the wick in the coil thats shitty

Sent from my LGL41C using Tapatalk
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
for it to be a chimney, the center of the coil needs to be open and the wick around the outside, kind of like the way atlantis and delta coils heads are
Click to expand...
That would be easy to do tho with how i positioned the coil both legs r bent toward the center of the coil the legs would hold the wic inplace around the coil in theory, ill have ro wait for more cotton to get to me

Sent from my LGL41C using Tapatalk
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Good morning and Happy Father's Day. Sorry I have been preparing for a audit. It is really kicking me in the ass. I am in the office now and have been working 7 days a week till its over. Hope all is well.
 
L

Lighty269

Guest
Taver13 said:
for it to be a chimney, the center of the coil needs to be open and the wick around the outside, kind of like the way atlantis and delta coils heads are
Click to expand...

I agree, that build is not what I use or have seen, but beside that if it works, don't fix it.
 
L

Lighty269

Guest
Question about Nickle

I am use to using 24 & 26 gauge wire for my builds to get low ohms. Now with temp I have been trying the same and it no worky. I read somewhere you need to use smaller gauge to even get resistance in non resistance wire. Anyone have any input?
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
Lighty269 said:
Question about Nickle

I am use to using 24 & 26 gauge wire for my builds to get low ohms. Now with temp I have been trying the same and it no worky. I read somewhere you need to use smaller gauge to even get resistance in non resistance wire. Anyone have any input?
Click to expand...

This what I have working with 26g nickle 200

14 wraps 0.21 single coil on 3mm
14 wraps 0.39 single coil on 3mm
Duel coil 3mm 12 Wraps 0.05

I made the coils fairly tight and I get really thick clouds using max vg, make sure and set resistance on ipv4 when you first screw it on mod, so to me the numbers are odd, but that's what worked for me :)

Part of my issues was my dark horse keeps shorting out so was frustrating and had to use my Mutation X
 
T

Taver13

Guest
Lighty269 said:
Question about Nickle

I am use to using 24 & 26 gauge wire for my builds to get low ohms. Now with temp I have been trying the same and it no worky. I read somewhere you need to use smaller gauge to even get resistance in non resistance wire. Anyone have any input?
Click to expand...
this is true, 30 and 32 are the best to be able to get some resistance out of it, you need MASSIVE coils with the thicker wire to get something the devices can fire
 
T

Taver13

Guest
Cruel-Phate said:
This what I have working with 26g nickle 200

14 wraps 0.21 single coil on 3mm
14 wraps 0.39 single coil on 3mm
Duel coil 3mm 12 Wraps 0.05

I made the coils fairly tight and I get really thick clouds using max vg, make sure and set resistance on ipv4 when you first screw it on mod, so to me the numbers are odd, but that's what worked for me :)

Part of my issues was my dark horse keeps shorting out so was frustrating and had to use my Mutation X
Click to expand...
that is the same issue @BenJammin had with his dark horse and it fried the mosfet on his box
 
L

Lighty269

Guest
Cruel-Phate said:
This what I have working with 26g nickle 200

14 wraps 0.21 single coil on 3mm
14 wraps 0.39 single coil on 3mm
Duel coil 3mm 12 Wraps 0.05

I made the coils fairly tight and I get really thick clouds using max vg, make sure and set resistance on ipv4 when you first screw it on mod, so to me the numbers are odd, but that's what worked for me :)

Part of my issues was my dark horse keeps shorting out so was frustrating and had to use my Mutation X
Click to expand...


thank you!
 
L

Lighty269

Guest
Cruel-Phate said:
This what I have working with 26g nickle 200

14 wraps 0.21 single coil on 3mm
14 wraps 0.39 single coil on 3mm
Duel coil 3mm 12 Wraps 0.05

I made the coils fairly tight and I get really thick clouds using max vg, make sure and set resistance on ipv4 when you first screw it on mod, so to me the numbers are odd, but that's what worked for me :)

Part of my issues was my dark horse keeps shorting out so was frustrating and had to use my Mutation X
Click to expand...

That IPV4 is of no use to me, it is going back! I have other TC devices and some more on the way.
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Lighty269 said:
That IPV4 is of no use to me, it is going back! I have other TC devices and some more on the way.
Click to expand...
Will she take it back? What temp control did you order? I am trying to decide what to get.
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Lighty269 said:
Yes she is taking it back, i am waiting on confirmation on some new Sigelei TC
Click to expand...
I saw a preorder for the Sigelie but that was it. I am considering Don's SMY 60 TC but figure a lot of companies must have stuff about to hit the market.
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Heather said:
I saw a preorder for the Sigelie but that was it. I am considering Don's SMY 60 TC but figure a lot of companies must have stuff about to hit the market.
Click to expand...
Glad she is taking it back though. That is a relief.
 
dodyhearts

dodyhearts

Silver Contributor
Member For 4 Years
Alright so those who want to know about the mad hatter rda so far it's legit just watch when filling if you over fill it will leak I have it at a .3 ohm single coil 26g x2 wrapped 4 times on a .30 inner on a caravela mech mod let me know what yall think


Roses are red, Violets are blue,
Rhyming is hard, I'm Batman

Sent from the Batcave
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Cruel-Phate said:
I bet you had fun on your club bike ride :cool: I have not rode a bike in years....I use to have a dirt bike to ride in the mountains but I cloths lined myself on a tree across the chest and have not rode since, "it hurt so bad :(

What wire and from where do you recommend again? I know you posted a while back but I did not bookmark :(
Click to expand...

Look up Spider silk Ti wire by Envy. It is available on amazon. @Taver13, it's about a dollar a foot shipped. Insane ... yes. I probably have an order of 24, 26 & 28 guage Ti at the house now from an Etsy Jewelry shop. It is priced well and is claimed to be grade 1 surgical stuff. I'm gonna clean it up, try it and report result. The Spider Silk is packaged and prepped for vaping.

Ti is much more durable than Ni200 which makes the cost a little easier to swallow. Building with it required me to modify building habits. Pulsing coils isn't good. Overheated Ti produces Ti di oxide which is NOT good for you. Spaced coils aren't a requirement with Ti, but since you don't want to pulse it, microcoils gotta be built with extreme care.
 
L

Lighty269

Guest
dred said:
Look up Spider silk Ti wire by Envy. It is available on amazon. @Taver13, it's about a dollar a foot shipped. Insane ... yes. I probably have an order of 24, 26 & 28 guage Ti at the house now from an Etsy Jewelry shop. It is priced well and is claimed to be grade 1 surgical stuff. I'm gonna clean it up, try it and report result. The Spider Silk is packaged and prepped for vaping.

Ti is much more durable than Ni200 which makes the cost a little easier to swallow. Building with it required me to modify building habits. Pulsing coils isn't good. Overheated Ti produces Ti di oxide which is NOT good for you. Spaced coils aren't a requirement with Ti, but since you don't want to pulse it, microcoils gotta be built with extreme care.
Click to expand...

Exactly well said, glad you pointed out the potential danger of Ti. I will someday venture that way, but from what I have read, to much risk. I am sticking with tempered Nickle.
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Heather said:
I saw a preorder for the Sigelie but that was it. I am considering Don's SMY 60 TC but figure a lot of companies must have stuff about to hit the market.
Click to expand...

I'm expecting no fewer than 20 new TL options by mid fall. I'm gonna do one and a backup then go into a holding pattern for all the slower innovators to get the market more settled.
 
D

Donald Bickers

Guest
heres what I got for fathers day
DfP2ElB.jpg

1/4 in tee handle w/spinner and vicegrip crecent wrench,both Craftsman
 
You must log in or register to reply here.

VU Sponsors

Top