Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0


  • Total voters
    73
D

Donald Bickers

Guest
GNlK6iWt.jpg
 

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
Good Morning guys!
So my evic is flipping to power mode and I had to take it on and off a few times before it started to work correct on temp ni mode. My evic is a high maintenance girl :(
 
D

Donald Bickers

Guest
Good Morning guys!
So my evic is flipping to power mode and I had to take it on and off a few times before it started to work correct on temp ni mode. My evic is a high maintenance girl :(
I haven't had any problems with mine yet,,,,,,now the mega tank is a different story,,,,,what a piece of crap
 

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years

Haha I find it pretty fitting that this was at the top of the page when I opened up the thread this morning

Morning all! Made it back from Oklahoma. Check out the colors on this shroom I found out there (no I didn't try to eat it lol)
ImageUploadedByTapatalk1435841053.421289.jpg
 

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
@Taver13 ... this might be your baby, but it might brick your IPV ...

edit: false alarm ... but I now know where to find the M class upgrade file. Too bad I'm hunting the sx350j bigger wattage upgrade.
 
Last edited:

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Hey lighty I bought a charger from gear best on the 27th they just shipped it, the mod still hasn't shipped but I'm guessing in the next day or so

Sent from my LabRatory
 

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Mine has not shipped yet either, now I am rethinking this place.
Well I ordered the mod on 29th but I made a previous order on 27th so I'm expecting the mod to ship in a day or so


But yeah I'm never ordering from them again plus they are using Netherlands ground post office to ship it o_O last I checked that's not USA I thought they were a USA warehouse oh well for that

Sent from my LabRatory
 
L

Lighty269

Guest
Well I ordered the mod on 29th but I made a previous order on 27th so I'm expecting the mod to ship in a day or so


But yeah I'm never ordering from them again plus they are using Netherlands ground post office to ship it o_O last I checked that's not USA I thought they were a USA warehouse oh well for that

Sent from my LabRatory

I thought the same as well, I sent them an email. Let's see if they reply
 

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Yeah I sent one yesterday when we were talking about it and I haven't got a response yet

Sent from my LabRatory
 
T

Taver13

Guest
@Taver13 ... this might be your baby, but it might brick your IPV ...

edit: false alarm ... but I now know where to find the M class upgrade file. Too bad I'm hunting the sx350j bigger wattage upgrade.
i have been hunting the torrents myself. i actually have the m class file just to look at for no reason
 

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
i have been hunting the torrents myself. i actually have the m class file just to look at for no reason

If you come across the sx350j 150w version, grab it for me please. I got the 120w m class version, but ... I need the dual battery series setup for a generic sx350j.
 
T

Taver13

Guest
If you come across the sx350j 150w version, grab it for me please. I got the 120w m class version, but ... I need the dual battery series setup for a generic sx350j.
will do, i remember seeing it somewhere last night, ill look into it for you here inn a bit
 

RZAwora

Silver Contributor
Member For 4 Years
Just giving everyone a status update on the box... @Sigmardin has it currently, and his wife had a baby on Sunday so there was a small delay in getting it shipped back out. @Shawn.freeman50 and also @Bambua have decided to pass this round, so the box will be shipped to @Geauxst. It should be shipped out by Monday at the latest, and @Sigmardin will post the tracking # once it is shipped.
 
L

Lighty269

Guest
Just giving everyone a status update on the box... @Sigmardin has it currently, and his wife had a baby on Sunday so there was a small delay in getting it shipped back out. @Shawn.freeman50 and also @Bambua have decided to pass this round, so the box will be shipped to @Geauxst. It should be shipped out by Monday at the latest, and @Sigmardin will post the tracking # once it is shipped.

Thanks for the update! Congrats to @Sigmardin
 

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years

otto85

Gold Contributor
Member For 4 Years
Nice! Beware, if you are OCD like me, the finger prints will bug the shit out of you...
Ya im massive ocd on everything but i always wipe all my stuff down all the time anyways even my cherry bomber cant hold finger prints any worse then my smart phone lol, a buddie of my has the snow wolf so ive used it i love it gonna let anothe buddy use the shit out of his ipv3 li before i pull the trigger

sent from the back of Otto's bus
 

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Nice! Beware, if you are OCD like me, the finger prints will bug the shit out of you...
Diy no fingerprints

Rain-X! Follow these directions to a super smooth, clean screen that will last at least a month between applications.

1. Clean your screen using a GOOD microfiber cloth and a little bit of water.
2. Repeat step one at least once! You really really want to have your screen as clean and "out-of-the-box" perfect as you possibly can get it. Check it at multiple angles and light to make sure you have no haze, no smudges, no spots.
3. Apply Rain-X to wet the corner of a clean cotton rag
4. Using a gentle swirling motion, apply the rain-x to the screen. It will bead up at first, but continue to swirl it on for about 20-30 seconds until it starts drying to a uniform hazy coating
5. Wet your microfiber cloth again, getting it damp but not dripping and buff off most of the hazy coat
6. When you have most of the haze removed, switch to the dry end of the microfiber and buff off the rest.
7. Go back to the bright lights and multiple viewing angles to check for missed areas.

Good luck

Sent from my LabRatory
 

otto85

Gold Contributor
Member For 4 Years
Diy no fingerprints

Rain-X! Follow these directions to a super smooth, clean screen that will last at least a month between applications.

1. Clean your screen using a GOOD microfiber cloth and a little bit of water.
2. Repeat step one at least once! You really really want to have your screen as clean and "out-of-the-box" perfect as you possibly can get it. Check it at multiple angles and light to make sure you have no haze, no smudges, no spots.
3. Apply Rain-X to wet the corner of a clean cotton rag
4. Using a gentle swirling motion, apply the rain-x to the screen. It will bead up at first, but continue to swirl it on for about 20-30 seconds until it starts drying to a uniform hazy coating
5. Wet your microfiber cloth again, getting it damp but not dripping and buff off most of the hazy coat
6. When you have most of the haze removed, switch to the dry end of the microfiber and buff off the rest.
7. Go back to the bright lights and multiple viewing angles to check for missed areas.

Good luck

Sent from my LabRatory
Fuck thats a good idea it actually keeps fingerprints away huh?

sent from the back of Otto's bus
 

VU Sponsors

Top