Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
BenJammin

BenJammin

Gold Contributor
Member For 4 Years
Good morning everyone!


I believe I understand you completely @ottoslaborworks . With a "Sleeper" coil you start at one negative, then coil, go thru positive, then coil, and end at the other negative. This acts as two coils when calculating ohms. If each coil is wrapped at .5ohms, that would make your total build .25ohms since there are "two" it's halved.

That coil you wrapped there a "Dual Series" or whatever you called it goes from a negative post, then coil, between, never touching, negative and positive posts, then coil, then ends at the positive post. Therefore causing it to act as one coil since there is only one negative connection involved. So if "each coil" (side of the rda) was wrapped at .5ohms then your total ohms for that build would be close to 1ohm (give or take for the extra wire to get from one coil to the other.)

Am I correct in my understanding otto?
 
otto85

otto85

Gold Contributor
Member For 4 Years
BenJammin said:
Good morning everyone!


I believe I understand you completely @ottoslaborworks . With a "Sleeper" coil you start at one negative, then coil, go thru positive, then coil, and end at the other negative. This acts as two coils when calculating ohms. If each coil is wrapped at .5ohms, that would make your total build .25ohms since there are "two" it's halved.

That coil you wrapped there a "Dual Series" or whatever you called it goes from a negative post, then coil, between, never touching, negative and positive posts, then coil, then ends at the positive post. Therefore causing it to act as one coil since there is only one negative connection involved. So if "each coil" (side of the rda) was wrapped at .5ohms then your total ohms for that build would be close to 1ohm (give or take for the extra wire to get from one coil to the other.)

Am I correct in my understanding otto?
Click to expand...
Morning all, yup that it correct

sent from the back of Otto's bus
 
T

Taver13

Guest
Spoke too soon. P4y really screwed the pooch with the update. Titanium mode is in usable. Tried 4 Atties all with different builds and it will barely fire them even all the way at 100 joules temp all the way up. It will fire ok at best with the temp all the way up. Kinda defeats the whole purpose of temp control if you have to have the temp maxed out to fire decent
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Taver13 said:
Spoke too soon. P4y really screwed the pooch with the update. Titanium mode is in usable. Tried 4 Atties all with different builds and it will barely fire them even all the way at 100 joules temp all the way up. It will fire ok at best with the temp all the way up. Kinda defeats the whole purpose of temp control if you have to have the temp maxed out to fire decent
Click to expand...
I'm beginning to think the ipv4 is just a cursed model they have had so many issues with it

Sent from my LabRatory
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Taver13 said:
It's not an s. At least not bought that way. I removed charging board and updated so I guess theoretically it is
Click to expand...
Technically speaking.... Yeah lol i saw that and was like ... ipv is the new iPhone of the vaping world

Sent from my LabRatory
 
Diescum88

Diescum88

Gold Contributor
Member For 4 Years
Morning fuckers, how's everyone? Usps needs to stop hiring people who can't sort mail....fuckin Flavorings order got sent from North Carolina to.........west Sacramento , Ca on the opposite end of the country
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Taver13 said:
ipv4 update, titanium needs bugs worked but it goes to 100 joules nopw
Click to expand...
Wait till the next update it will be capable of 10,000joules

More powerrrrrr!!!!!!

e6c9560c9fae2ff1d090545ecdf661c0.jpg


Sent from my LabRatory
 
otto85

otto85

Gold Contributor
Member For 4 Years
Lighty269 said:
Sounds like you might be talking from experience, so maybe it's a bad idea!
Click to expand...
Retore the muscle in my forearm not sure how bad it is this time but I tore it almost a yr ago almost clean in half doctor said I need surgery but haven't had the money for it looks like I'll be saving up now

sent from the back of Otto's bus
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Cruel-Phate said:
it will not load the damn driver wtf, windows 8.1
Click to expand...

CP, sorry about your windows 8.1. The update will be a pain you your posterior. I don't have 8.1, but I do know google will be your friend. You will have to jack with junk, but the tech types have figured out how to get the Yihi updates to work in 8.1. You just have a bunch of extra steps to accomplish.
 
T

Taver13

Guest
Dr3d said:
CP, sorry about your windows 8.1. The update will be a pain you your posterior. I don't have 8.1, but I do know google will be your friend. You will have to jack with junk, but the tech types have figured out how to get the Yihi updates to work in 8.1. You just have a bunch of extra steps to accomplish.
Click to expand...
must say im a little dissapointed with the performance in Ti mode.
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Taver13 said:
must say im a little dissapointed with the performance in Ti mode.
Click to expand...

HOOT ... it's still a test update, and there is hope. Word on the street is: Unkanmen (sp?) just shipped Yihi a buttload of Grade 1 Ti wire. The text between the lines suggests the Chinese (yes, I just generalized and expanded the rumor to meet my experience 'cause Joyetech is guilty too) have been setting up TCRs with inferior Titanium. What kills me is the idea that Smok appears to have successfully out pimped Yihi and Joyetech with a user selectable TCR - screw wire selection, they went straight for pick your TCR with the disco lit Cube II.

I only sorta feel for you 'cause you got an update. I did try to push the sx M class test firmware onto my sx350j. SXi gave me the big fat finger on that one. The freaking baggie I unsealed to remove my sx350j had the freak'n sx Mini logo on it, so I had hope. But, evidently, Yihi is hard coding something to the chips to prevent me from getting satisfaction. I'm sure its not really all about me this time; and, they are probably more worried about folks buying the chips for $70 street price and dropping them into a clone of their SX Minis and flooding the market with half price SX Mini M class clones since I have no doubt the chinese could produce that box for under $30, sell the clone for $100 and still enjoy a market respectable profit margin.

So, by my math: @Geauxst has an update, @Taver13 has an update, @Cruel-Phate will have an update as soon as he drop kicks his updated computer a couple times, but Dr3d has no update. I'm worried about what these tears are gonna do to my coils if this uncontrollable leaking from my eyes accidentally drops into the Billow v2s wide bore drip tip and find their way to my coils. Guess I'm gonna go post some more of my eclectic musical selections (yes, they are all from the playlist on my phone) to that V Rod Vapors Name Game Contest Thread. FWIW, I fully expect that PIF 5'rs are excluded from winning. I simply like toss'g out the wacky and/or unexpected tunage.
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Dr3d said:
HOOT ... it's still a test update, and there is hope. Word on the street is: Unkanmen (sp?) just shipped Yihi a buttload of Grade 1 Ti wire. The text between the lines suggests the Chinese (yes, I just generalized and expanded the rumor to meet my experience 'cause Joyetech is guilty too) have been setting up TCRs with inferior Titanium. What kills me is the idea that Smok appears to have successfully out pimped Yihi and Joyetech with a user selectable TCR - screw wire selection, they went straight for pick your TCR with the disco lit Cube II.

I only sorta feel for you 'cause you got an update. I did try to push the sx M class test firmware onto my sx350j. SXi gave me the big fat finger on that one. The freaking baggie I unsealed to remove my sx350j had the freak'n sx Mini logo on it, so I had hope. But, evidently, Yihi is hard coding something to the chips to prevent me from getting satisfaction. I'm sure its not really all about me this time; and, they are probably more worried about folks buying the chips for $70 street price and dropping them into a clone of their SX Minis and flooding the market with half price SX Mini M class clones since I have no doubt the chinese could produce that box for under $30, sell the clone for $100 and still enjoy a market respectable profit margin.

So, by my math: @Geauxst has an update, @Taver13 has an update, @Cruel-Phate will have an update as soon as he drop kicks his updated computer a couple times, but Dr3d has no update. I'm worried about what these tears are gonna do to my coils if this uncontrollable leaking from my eyes accidentally drops into the Billow v2s wide bore drip tip and find their way to my coils. Guess I'm gonna go post some more of my eclectic musical selections (yes, they are all from the playlist on my phone) to that V Rod Vapors Name Game Contest Thread. FWIW, I fully expect that PIF 5'rs are excluded from winning. I simply like toss'g out the wacky and/or unexpected tunage.
Click to expand...
Gotta say been live it to I haven't done super extensive testing but the update works for what I have therefore I'm happy

1479c9709e655d2d15a91d6b52e76c12.jpg

Been handling trmp mode preety good all day might rebuild even lower later on but very enjoyable vape with this setup

Sent from my LabRatory
 
T

Taver13

Guest
Dr3d said:
HOOT ... it's still a test update, and there is hope. Word on the street is: Unkanmen (sp?) just shipped Yihi a buttload of Grade 1 Ti wire. The text between the lines suggests the Chinese (yes, I just generalized and expanded the rumor to meet my experience 'cause Joyetech is guilty too) have been setting up TCRs with inferior Titanium. What kills me is the idea that Smok appears to have successfully out pimped Yihi and Joyetech with a user selectable TCR - screw wire selection, they went straight for pick your TCR with the disco lit Cube II.

I only sorta feel for you 'cause you got an update. I did try to push the sx M class test firmware onto my sx350j. SXi gave me the big fat finger on that one. The freaking baggie I unsealed to remove my sx350j had the freak'n sx Mini logo on it, so I had hope. But, evidently, Yihi is hard coding something to the chips to prevent me from getting satisfaction. I'm sure its not really all about me this time; and, they are probably more worried about folks buying the chips for $70 street price and dropping them into a clone of their SX Minis and flooding the market with half price SX Mini M class clones since I have no doubt the chinese could produce that box for under $30, sell the clone for $100 and still enjoy a market respectable profit margin.

So, by my math: @Geauxst has an update, @Taver13 has an update, @Cruel-Phate will have an update as soon as he drop kicks his updated computer a couple times, but Dr3d has no update. I'm worried about what these tears are gonna do to my coils if this uncontrollable leaking from my eyes accidentally drops into the Billow v2s wide bore drip tip and find their way to my coils. Guess I'm gonna go post some more of my eclectic musical selections (yes, they are all from the playlist on my phone) to that V Rod Vapors Name Game Contest Thread. FWIW, I fully expect that PIF 5'rs are excluded from winning. I simply like toss'g out the wacky and/or unexpected tunage.
Click to expand...
50 is not excluded
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
So question.... I know all gas station cig alikes are crap but out of the ones y'all have seen which would you say has been the best

I found that mark was ok

Sent from my LabRatory
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Geauxst said:
So question.... I know all gas station cig alikes are crap but out of the ones y'all have seen which would you say has been the best

I found that mark was ok

Sent from my LabRatory
Click to expand...

Well I ain't seen'm in a gas station. But, my first 2.5 years off the tobaccy can be credited to cigalikes from http://www.smoketip.com/. Wild to see all the stuff they've added beyond the cigalikes - I hadn't visited the site for almost 2 years, and glad they are still go'n. I found them scouring internet reviews back in late 2010/early 2011 - they were very well reviewed and did deliver a cigarette like experience.
 
Diescum88

Diescum88

Gold Contributor
Member For 4 Years
Geauxst said:
So question.... I know all gas station cig alikes are crap but out of the ones y'all have seen which would you say has been the best

I found that mark was ok

Sent from my LabRatory
Click to expand...
If you mean using their flavor cartridges and whatnot then e-cig2go was the first I got and I liked em but they died to quick same with blu and mark10's but I like all of em as a sneak-a-vape when I'm in non vape friendly places like at work( like a quick hit in my booth or in bathroom ) after I refill them with my own juices

Only reason I like the mark10's is cuz I got em free. Oh and the vuse ones are ok too I spose
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Diescum88 said:
If you mean using their flavor cartridges and whatnot then e-cig2go was the first I got and I liked em but they died to quick same with blu and mark10's but I like all of em as a sneak-a-vape when I'm in non vape friendly places like at work( like a quick hit in my booth or in bathroom ) after I refill them with my own juices

Only reason I like the mark10's is cuz I got em free. Oh and the vuse ones are ok too I spose
Click to expand...
Vuse vs mark10 which better choice

Sent from my LabRatory
 
You must log in or register to reply here.

VU Sponsors

Top