T
Taver13
Guest
mornin all you boner biting bastards, um, actually paint stripper tastes more like regular dr pepper
Become a Patron!
T
Taver13
Guest
mornin rick
T
Taver13
Guest
mornin ben
L
Lighty269
Guest
Funny!
The local campground closest to me's biggest weekend is Halloween. They have a camp site decorating competition, haunted trails, haunted hay rides, regular hay rides, etc. It's a huge turn out and it's almost impossible to book a site because of it. There's almost 200 spots and you can't book any earlier than 6months before hand and can only book 2 weeks at a time. So I booked my site 6months and 2weeks before hand and paid for a 2 week stay. 2 weeks later I cancelled that and rebooked for my 3 night stay. When I first booked it was at 12 eastern time (earliest you could possibly book) and by 12:10 there were already 74 sites booked lol._________
I can see that...all the good camp grounds book fast here for large events
Yeah, I just don't know about the temp devices, "I am intrigued for sure but clueless really
Never know huh lol I used to live in the arm pit of Texas not to far....my daughter is taking law classes at the collage and started dating some rich shit lawyer long distance so whatever
I just twisted me up some 26g kanthol super tight and I have a dual 4 wrap coil in my v5 at .26ohms, that shit is the tits!!I really like the mutation x v4, it's been my number 3 this week
Welcome to the dark sideI went from one extreme to the other. I was doing a tight pull with low watts and now I just been dripping with as much air as possible and I keep building up a tolerance for high watts but then again I been doing just 3 nic that was a huge jump for me, I went from 10 to 3 but now I chain vape
T
Taver13
Guest
my mint chocolate chip icecream recipe i made last night goes fucking outstanding with my morning coffee. look for this in the future after tiny bit of tweaking.
L
Lighty269
Guest
I am beginning to not like the SMY50TC for one reason! It is a finger print magnet.
T
Taver13
Guest
what the fuck, why does something go wrong with my mother in laws car every fucking friday. looks like i will be either doing the starter, or the flywheel and im hoping the starter, the flywheel will be a complete pain in the dick, especially on a ford, and in the driveway with no lift
L
Lighty269
Guest
T
Taver13
Guest
yes, i am, in fact, mad bro
L
Lighty269
Guest
That really sucks and your right, seems like every week she needs her car fixed. You think it might be her mechanic?
Good morning people... @Lighty269 you aren't right my friend. Haha!
L
Lighty269
Guest
Good morning people... @Lighty269 you aren't right my friend. Haha!
I am always wrong! So what am I wrong about this time
L
Lighty269
Guest
I have to apologize! I am actually having a very bad day, so I am trying to humor myself and others.
Sorry you're having a bad day...hope it gets better for you sir!
Hopefully you'll be able to turn that frown upside down.
D
Donald Bickers
Guest
morning people
Good morning Don!
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Morning RZ, Tav, Ser Donald of Bickers, Lighty and everyone else
D
Donald Bickers
Guest
hope your day gets better man
L
Lighty269
Guest
I hear you there, I should be in work. But, I can not get to it.
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Same here. I worked 15 hours yesterday and my boss is in Georgia right now so I am not rushing to get to the lab today lol
D
Donald Bickers
Guest
well fuck,,,,,one of us has to go to work,,,,,see y'all later
Lol I been at work for bout 5 hours now, ready to kill my material handler
Geauxst
A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Geauxst
A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Well to add to the list of bad days I went back to Dr for a follow up on the sore on my leg which I though was getting better she agreed not purple and not as red but she wants me to get an xray and go see a surgeon for further diagnosis .... FML MAN!!!
Sent from my LabRatory
Sent from my LabRatory
L
Lighty269
Guest
Look up brother, maybe it's just to make sure your good.
Hey in my shoes it's like, when all else fails maybe a surgeon can give me some relief. Normally it's a little hell right after the surgery, but then things get better. Hopefully it's not too serious and can be fixed for you. Then you won't have to worry about it or deal with it any longer. Wish you te best man.
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
day 3 of using the subtank RBA deck with extra juice holes on the side and still haven't had a dry hit! 
About time to top it off though lol
About time to top it off though lol
Think the side hole trick would work with the OG subtank ?
If it works on the mini I don't see why it wouldn't work the same on the OG one.
Geauxst
A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Hey everyone I noticed Tapatalk updated and I was playing in settings cause my notifications were blowing up
so I looked into the apps advanced settings and I found the culprit that has been messing with people so if you get a few notifications and it stops try changing this and see if it helps
Sent from my LabRatory
Sent from my LabRatory
@Pauly Walnuts I got those juices today.
@dred I got those Subtank bell caps today.
Thanks to both of you for sending those.
@Vaperjim did you get a chance to send the PIF Box out to @Faust yet? Just curious if I need to contact the next person in line yet...oh shit, nevermind, the next person is @BenJammin after @Faust is done with it. I know @BenJammin is always ready! Haha
@dred I got those Subtank bell caps today.
Thanks to both of you for sending those.
@Vaperjim did you get a chance to send the PIF Box out to @Faust yet? Just curious if I need to contact the next person in line yet...oh shit, nevermind, the next person is @BenJammin after @Faust is done with it. I know @BenJammin is always ready!
Haha
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
I think it would. I'll have to try that out too! Might be a good reason to dust off the old OG
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Really not a fan of work today. My boss is at a big conference with the other groups in our study and he's got all this shit he needs me to do like NOW and is getting upset because I can't instantly combine 30,000 lines of data and fill out his reports...... One more month. One more month. One more month......
How can you not be ready for PIFmas!?!?@Pauly Walnuts I got those juices today.
@dred I got those Subtank bell caps today.
Thanks to both of you for sending those.
@Vaperjim did you get a chance to send the PIF Box out to @Faust yet? Just curious if I need to contact the next person in line yet...oh shit, nevermind, the next person is @BenJammin after @Faust is done with it. I know @BenJammin is always ready!
L
Lighty269
Guest
Alright! I had enough of work today!
Curious what you're wicking that puppy with? I really need to break out my RBA deck and try it out. I have Koh Gen Do and rayon, so will likely try rayon first.
Sent from my iPad using Tapatalk
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Rayon, and I've got it stuffed in there. I should have taken a pic as I was wicking it but didn't think to. Basically what I did was: with the barrel off wicked like normal (it's a 2.5mm coil) with rayon (a bit on the tight side) and left the tails really long (like 2" on either side). Then I flipped the tails up, worked the barrel over them and screwed that down. Then, I trimmed the tails so that there was about 1/2" left sticking above the barrel and shoved all of that down in the sides, basically filling in the sides where the juice channels are. So far it's wicking cleanly, no major buildup on the rayon and it's consistent as hell.
What size holes did you drill in the RBA sleeve?
Hmm...didn't see that, so I went ahead and drilled 7/64" holes...same size as in the stock OCC coils. Going to fill it up with some high VG juices and give it a whirl tonight if I get a chance.
anendeloflorien
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
3/32" on either side. Seems to be the perfect size for the high/max VG juices I like. I haven't tried it with any thinner juice yet though, I imagine it would be more prone to leaking with thinner juice.sorry typed that up earlier and must not have hit the "post" button lol