Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
RZAwora

RZAwora

Silver Contributor
Member For 4 Years
So here are my thoughta and results of drilling out the holes in the rba. First of all, great idea. Second of all, wicks 90% VG juices no problem now, if wicked right, talk about that in a minute. Filled it with a 70pg/30vg juice last night, and no leakage whatsoever this morning. It does cause the Subtank to guzzle juice, but I'm also running it at 0.6ohms, I'm going to try a 1.2 ohm build later today and see if it slows down juice consumption. Anyway, in regards to wicking...at first I wicked it with Rayon in the style that was posted on here, I think by @anendeloflorien not sure...this style packing wicking material in, first I noticed reduced airflow, then I started getting dry hits. This could be because of my style vaping, as I tend to take long hits, I mean 8-9 seconds full-on lung hits. I was getting dry hit after dry hit. So I decided to wick with a lot less, and also Japanese cotton. Instant results were great, no more dry hits. I was worried at first about flooding, but it never happened. So I'm sticking with the cotton, and minimal wicking, just enough to touch the holes basically. Here's my method, thread about 1.5-2" of wick through the coil, pull it up, insert it into the RBA sleeve and screw the RBA sleeve down, cut the wicking even with the top of the sleeve, tuck wick down so it just touches the newly drilled holes, screw on top cap of rba section, screw on tank, let sit for a few minutes, vape away. I've been vaping it at 24 watts that way, and even a 10 second full on lung hit chain vaping, I'm not getting any dry hits whatsoever. Awesome! I'll go take some pictures now too to post up here as well, give me a few.
 
RZAwora

RZAwora

Silver Contributor
Member For 4 Years
e8b68c4740d333a37d2ecb0bf3b607aa.jpg
fde5fddef6d94070fb8b4a44fa943d3d.jpg
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
dodyhearts said:
The amount of fuckery I would get into if I lived that close to one your a brave soul lol


Roses are red,Violets are blue,
Rhyming is hard, I'm Batman
Sent From The BatCave
Click to expand...
There's one off Sherwood and old hammond

Sent from my LabRatory
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
Hey @Taver13 not a big deal but when your messing with the list again I'm listed as living in baton rouge which I live in denham springs now since the move... I know y'all got the right address I'm not worried just erks me to see baton rouge(bunch of douchebags) lol

Sent from my LabRatory
 
dodyhearts

dodyhearts

Silver Contributor
Member For 4 Years
Geauxst said:
Hey @Taver13 not a big deal but when your messing with the list again I'm listed as living in baton rouge which I live human n denham springs now since the move... I know y'all got the right address I'm not worried just erks me to see baton rouge(bunch of douchebags) lol

Sent from my LabRatory
Click to expand...
I second that lol


Roses are red,Violets are blue,
Rhyming is hard, I'm Batman
Sent From The BatCave
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
@Taver13, lotta good it does you now, but Harbor Freight is doing the sidewalk sale and multimeters are one of the free giveaways. If I head past one of the shops today I figured on pick'n one up for the PIF box.
 
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
dred said:
@Taver13, lotta good it does you now, but Harbor Freight is doing the sidewalk sale and multimeters are one of the free giveaways. If I head past one of the shops today I figured on pick'n one up for the PIF box.
Click to expand...
I believe they had a Multi in there unless someone grabbed it

Sent from my LabRatory
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Lighty269 said:
THe Multi Meter HF has is garbage!
Click to expand...

True and unless @Taver13 signs up a rank newb in that last open spot, I think we're all covered. That doesn't mean I won't find my way out to the sidewalk sale anyway ... the always manage to have something I gotta have. Trick is finding places to put it all. @Tawni's place is fill'n up too.
 
D

Donald Bickers

Guest
dred said:
True and unless @Taver13 signs up a rank newb in that last open spot, I think we're all covered. That doesn't mean I won't find my way out to the sidewalk sale anyway ... the always manage to have something I gotta have. Trick is finding places to put it all. @Tawni's place is fill'n up too.
Click to expand...
I love sidewalk sales,,,,,good thing there aint no harbor freight here
 
L

Lighty269

Guest
Lighty269 said:
THe Multi Meter HF has is garbage!
Click to expand...
dred said:
True and unless @Taver13 signs up a rank newb in that last open spot, I think we're all covered. That doesn't mean I won't find my way out to the sidewalk sale anyway ... the always manage to have something I gotta have. Trick is finding places to put it all. @Tawni's place is fill'n up too.
Click to expand...

I mention that for the sub ohmers in our group. If you use this meter to check your builds, it is wrong. So, I would hate for someone to try and make a let say .08 build and use that meter thinking it is fine, then attach to a mech mod and it would have the battery vent because that meter was wrong.
 
Diescum88

Diescum88

Gold Contributor
Member For 4 Years
Lighty269 said:
I mention that for the sub ohmers in our group. If you use this meter to check your builds, it is wrong. So, I would hate for someone to try and make a let say .08 build and use that meter thinking it is fine, then attach to a mech mod and it would have the battery vent because that meter was wrong.
Click to expand...
Good to know, I have one I got from there a while ago. I use my ohm checker but had figured it would work as a backup
 
Diescum88

Diescum88

Gold Contributor
Member For 4 Years
So what's everyone up to today? Working on trouble shooting my brother in laws VTR (likes to randomly reset itself) and a co-workers MVP that needs the microusb charger redoldered in/ replaced
 
You must log in or register to reply here.

VU Sponsors

Top