Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
Geauxst

Geauxst

A Banished Ghost of the Past
VU Donator
Gold Contributor
Member For 4 Years
Member For 3 Years
wjohnsonjr said:
No worries and yes. My day job is a bit stressful. I am a Food Safety Consultant. But no worries! Heather no NI200 as of yet. Got you covered on the OCC coils .5 , 1.2, and .15. I have to put together an order anyway. You only pay my cost!
Click to expand...
Authentic or clone heads

Sent from my LabRatory
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Heather is funny you asked that. When I started vaping I was purchasing everything from the shops. I really walked out with this great feeling like they were taking care of me and giving me the best prices on everything. My local shop was selling me OCC coils for $6.00 a piece or $25.00 for a 5 pack. My cost is $1.80 each! That how I got into building because I would purchase a 5 pack and 2 out 5 coils were junk. I had to learn how to keep vaping at a reasonable price. Now when I walk in the shop they are begging me for products. I am not putting down the Brick and Motar's but I just can't justify that kind of a mark up. If you support the community then you should offer good product, great quality, and outstanding customer service. The prices are so high on some products people tend to think of vaping as a hobby. It's not for me!
 
Last edited:
L

Lighty269

Guest
Geauxst said:
Well I don't rebuild from the bottom I remove the top cap so I have a nice wide open gap to insert the new coil in
This is the method I use

Sent from my LabRatory
Click to expand...


Now that looked easy, I know what I will be doing when I return this weekend. Thanks!
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Geauxst said:
Authentic or clone heads

Sent from my LabRatory
Click to expand...
I honestly haven't purchased any so I haven't had them in my hand to verify that. Sorry brother that I couldn't answer that! I rebuild my own or use the RBA deck!
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
wjohnsonjr said:
Heather is funny you asked that. When I started vaping I was purchasing everything from the shops. I really walked out with this great feeling like they were taking care of me and giving me the best prices on everything. My local shop was selling me OCC coils for $6.00 a piece or $25.00 for a 5 pack. My cost is $1.80 each! That how I got into building because I would purchase a 5 pack and 2 out 5 coils were junk. I had to learn how to keep vaping at a reasonable price. Now when I walk in the shop they are begging me for products. I am not putting down the Brick and Motar's but I just can't justify that kind of a mark up. If you support the community then you should offer good product, great quality, and outstanding customer service. The prices are so high on some products people tend to think of vaping as a hobby. It's not for me!
Click to expand...

And I don't mind telling you my cost cause I would never charge anybody 6 bucks each so I would never be worried about someone knowing my cost. It is always cheaper than everyone elses. Plus all members of this group only pay my cost anyway! My way of saying thank you to the entire group!!!!!!! ;)
 
Last edited:
dodyhearts

dodyhearts

Silver Contributor
Member For 4 Years
wjohnsonjr said:
And I don't mind telling you my cost cause I would never charge anybody 6 buck each so I would never be worried about someone knowing my cost. It is always cheaper than everyone elses. Plus all members of this group only pay my cost anyway! My way of saying thank you to the entire group!!!!!!! ;)
Click to expand...
That's legit lol


Sent from my iPhone using Tapatalk
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
dred said:
I bet that old stock Kanger OCC heads are going to fire sale now that they have released the redesigned coils with the Subox Mini Kits.

I'm interested in the Kanger Vertical Coils when they become available. I'm also interested in the Subox Mini Kit depending on price.

Today's Vapemail is handcheck material. It's here:
View attachment 22207
Click to expand...

How do you like it? I thought the racing stripes made it look kinda bad ass!
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
dred said:
I bet that old stock Kanger OCC heads are going to fire sale now that they have released the redesigned coils with the Subox Mini Kits.

I'm interested in the Kanger Vertical Coils when they become available. I'm also interested in the Subox Mini Kit depending on price.

Today's Vapemail is handcheck material. It's here:
View attachment 22207
Click to expand...

That's nice Dred, "go Broncos lol what's that setup called again?
 
wjohnsonjr

wjohnsonjr

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
dred said:
I bet that old stock Kanger OCC heads are going to fire sale now that they have released the redesigned coils with the Subox Mini Kits.

I'm interested in the Kanger Vertical Coils when they become available. I'm also interested in the Subox Mini Kit depending on price.

Today's Vapemail is handcheck material. It's here:
View attachment 22207
Click to expand...

I actually haven't slept in 3 days cause I have been staying up in the wee hours chatting with representative in China from Kanger to get a lead on distribution to the states on the Subox Mini Kit. I also met Peter Wu from Wotofo. We chatted for over 2 hours and the conversation ended with him giving me the Wholesale-Distribution Price Guide on all of the Wotofo authentics. So that is the following:

The Phantom
Atty 3
Freakshow
Freakshow Mini w/ the wide bore trip tip and top cap. or Trip tip separate
The Troll
A-Mod (Wotofo clone but authentic of the SMPL mod)
 
T

Taver13

Guest
I have an a mod smpl and an amod FM mod that are awesome
wjohnsonjr said:
I actually haven't slept in 3 days cause I have been staying up in the wee hours chatting with representative in China from Kanger to get a lead on distribution to the states on the Subox Mini Kit. I also met Peter Wu from Wotofo. We chatted for over 2 hours and the conversation ended with him giving me the Wholesale-Distribution Price Guide on all of the Wotofo authentics. So that is the following:

The Phantom
Atty 3
Freakshow
Freakshow Mini w/ the wide bore trip tip and top cap. or Trip tip separate
The Troll
A-Mod (Wotofo clone but authentic of the SMPL mod)
Click to expand...
 
BenJammin

BenJammin

Gold Contributor
Member For 4 Years
a011784e72d744737b055e23a3f14016.jpg

This right here is the only reason I hate driving at night... drove 2 hours on the interstate Sunday night and it sounded like it was raining there were so many bugs... the "clean" spot is behind my bull bar where the bugs hit that first... and here is after spending 30min on the front of my truck (and then the rest of it) because of the damn bugs!
4ad4fe0aadb8f7b78669ee8eb05725b0.jpg

60b4f5c5e747532d2a68866716d3c53b.jpg
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
wjohnsonjr said:
How do you like it? I thought the racing stripes made it look kinda bad ass!
Click to expand...

Liking this Evic VT plenty. I love the paint ... muscle stripe included. Started out with the Titanium coil head and landed at 550 deg F at 40 watts for a comfortable vape. I'm new to this temp limited vaping thing, but I think I'm going to like it. Juice I made last night was 20/80 and wicks great in my Billow ... but I think I need to thin it out to really get a feel for this premade coil head. I'm pretty sure I'm bouncing off the temp limit because of wicking limitations and I'm not quite ready to yank the build in the Billow for Ti yet. When I'm sold, the Billow will get swapped over.

@Cruel-Phate I'm gonna forgive you for that comment just this once, but only because I'm a horse lover. Joyetech calls the color yellow, but I see it as gold. I have the silicone cover installed 'cause it is a fingerprint magnet. But, for you, I will edit in a pic so we can have an informed discussion. HOOT.

ImageUploadedByTapatalk1433984396.131105.jpg
 
Last edited:
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Lighty269 said:
@Heather those coils are real easy to rebuild. There are some videos on youtube. I am sure you have a pair of tweezers, I snag a good set from the wife and she complained. lol
Click to expand...
True I should try it.
wjohnsonjr said:
No worries and yes. My day job is a bit stressful. I am a Food Safety Consultant. But no worries! Heather no NI200 as of yet. Got you covered on the OCC coils .5 , 1.2, and .15. I have to put together an order anyway. You only pay my cost!
Click to expand...
Awesome. I nwwd a few boxes
Taver13 said:
View attachment 22210 View attachment 22211
I think them labels are pretty snazzy
Click to expand...
Wow. Beautiful labels.
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
dred said:
Liking this Evic VT plenty. I love the paint ... muscle stripe included. Started out with the Titanium coil head and landed at 550 deg F at 40 watts for a comfortable vape. I'm new to this temp limited vaping thing, but I think I'm going to like it. Juice I made last night was 20/80 and wicks great in my Billow ... but I think I need to thin it out to really get a feel for this premade coil head. I'm pretty sure I'm bouncing off the temp limit because of wicking limitations and I'm not quite ready to yank the build in the Billow for Ti yet. When I'm sold, the Billow will get swapped over.

@Cruel-Phate I'm gonna forgive you for that comment just this once, but only because I'm a horse lover. Joyetech calls the color yellow, but I see it as gold. I have the silicone cover installed 'cause it is a fingerprint magnet. But, for you, I will edit in a pic so we can have an informed discussion. HOOT.

View attachment 22232
Click to expand...


Oh yeah, "I meant Go Cowboys!! lol I really like that one, "all the colors are nice and sporty, "I might consider that one.

Thanks
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
Cruel-Phate said:
Oh yeah, "I meant Go Cowboys!! lol I really like that one, "all the colors are nice and sporty, "I might consider that one.

Thanks
Click to expand...

LMAO ... you realize that's worse. Let's settle on Go Skins or Go Texans - born Houston, grew up WDC & Upstate NY, live Houston.

Regarding the colors - it is definitely not one of my pink shirt days ... I'm feel'n a bit feminine with color and paint matter'n so much - hoot.
... this one - the gold with black stripe if you buy what I'm selling is my club color ... Gypsy Gold to give it a name.
... the white with blue stripe which should get here eventually matches the paint job on the Shelby GT350 Clone I made out of my '66 Fastback back in the 80s, so I had'ta get that'n for nostalgia.

Well, I'm breaking out my handy M3, .5 pitch screw to give a go at wrapping up my first 26g Ti coils. I'm planning to attempt a Joyetech CLR rebuild, Joyetech Delta II base, and a Subtank Mini RBA which I'm gonna drill. I'm hoping to have tank besides my billow that wicks this 20/80 that I'm liking as it is before I give up and mix 50/50.

dodyhearts said:
Did i hear something about the Cowboys?


Roses are red, Violets are blue,
Rhyming is hard, I'm Batman

Sent from the Batcave
Click to expand...
Blame CP!
 
Dr3d

Dr3d

Yes. What was the question?
VU Donator
Silver Contributor
Member For 4 Years
K so ... first Ti coil ... check.

ImageUploadedByTapatalk1433991704.060513.jpg

Here's hoping .5mm spacing on .405mm diameter wire works as well as the math that figured it. My lazy ass wound backwards on the coilmaster with M3 screw substituted for the CM pin. That there is the RBA deck of the Delta II.
 
You must log in or register to reply here.

VU Sponsors

Top