Become a Patron!

"5.1 Now inactive"

Would you like to participate in PIF 5.0

  • Total voters
    73
otto85

otto85

Gold Contributor
Member For 4 Years
Lovely weather here 74° calm breeze looking at 102° on sunday

sent from the back of Otto's bus
 
Heather

Heather

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
T

Taver13

Guest
@Cruel-Phate is about to hate on me pretty heavy. just attempted my first dual coil nickel build, and nailed it first shot....and to top it off, its in a goblin. you know what a bitch that thing is. got .077, using 30gauge nickel twisted with 30 gauge nichrome, 10 wraps 2mm ID
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
Taver13 said:
@Cruel-Phate is about to hate on me pretty heavy. just attempted my first dual coil nickel build, and nailed it first shot....and to top it off, its in a goblin. you know what a bitch that thing is. got .077, using 30gauge nickel twisted with 30 gauge nichrome, 10 wraps 2mm ID
Click to expand...

Show off ;) it only took me like 5 try's to get a duel, "in all fairness, my dark horse kept shorting out and I only have 26g, was a challenge for sure :) no way 26 is going to fit in that goblin :(
 
T

Taver13

Guest
looks like im gonna spend the evening converting tanks over to TC with the little nickel i have

bonus though got 5 nickel subtank coils from a trade for my subtank nanos i will be using with the Cloupor40
 
T

Taver13

Guest
Cruel-Phate said:
Show off ;) it only took me like 5 try's to get a duel, "in all fairness, my dark horse kept shorting out and I only have 26g, was a challenge for sure :) no way 26 is going to fit in that goblin :(
Click to expand...
i normally use 26 nichrome in the goblin, its doable, not easy and the coils need to be almost touching the deck. had to do that here too
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
Taver13 said:
i normally use 26 nichrome in the goblin, its doable, not easy and the coils need to be almost touching the deck. had to do that here too
Click to expand...

oooo I don't know, I did 12 Wraps each, 3mm just to equal 0.05, when you put the chimney on it I bet it would most likely rip one out in the process...I have not even tried to convert goblin yet, I would pull my hair trying :)
 
Cruel-Phate

Cruel-Phate

Just Thomas
VU Donator
Gold Contributor
Member For 4 Years
Taver13 said:
small diameter, and small wire, twisting is the key with the smaller wires, nickel is too damn flimsy, nichrome twisted with it makes it workable
Click to expand...

Yeah, I bet 30g is super soft heh , I think I will try twisted nichrome with the 200 for sure, "maybe the hell-boy first, that goblin is pain building, although I bought some really good snipers so I can get in closer now
 
T

Taver13

Guest
Cruel-Phate said:
Yeah, I bet 30g is super soft heh , I think I will try twisted nichrome with the 200 for sure, "maybe the hell-boy first, that goblin is pain building, although I bought some really good snipers so I can get in closer now
Click to expand...
that is another key with building tanks good snippers. i finally think my dripper days are over. i tried going back to em, i just cant, i just dont enjoy them like i used too
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
that is another key with building tanks good snippers. i finally think my dripper days are over. i tried going back to em, i just cant, i just dont enjoy them like i used too
Click to expand...
Any update on the goblin build ive tried a few different wickings and get dry hits after a few pulls using 70vg

sent from the back of Otto's bus
 
T

Taver13

Guest
ottoslaborworks said:
Any update on the goblin build ive tried a few different wickings and get dry hits after a few pulls using 70vg

sent from the back of Otto's bus
Click to expand...
crap, i forgot to take pictures. let me see if i can explain it, have the coils real low to the deck, and when you hold the wick down to the channels, cut it so its slightly angled and you just want a little tip of it in the channels. less is more when wicking this thing, but you have to have a very little bit in the channels or it will flood
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
crap, i forgot to take pictures. let me see if i can explain it, have the coils real low to the deck, and when you hold the wick down to the channels, cut it so its slightly angled and you just want a little tip of it in the channels. less is more when wicking this thing, but you have to have a very little bit in the channels or it will flood
Click to expand...
Sweet ill give it a shot thanks

sent from the back of Otto's bus
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Well I saved some money on shipping the Aussies that I wasn't expecting to have so I got myself a new toy today :) white Doge v4 - kind of an impulse buy but I'm dying to try this bad boy out! Any build suggestions? I'm limited to .3 ohm and above since I only have 50 watt regulated mods
 
anendeloflorien

anendeloflorien

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
5d2a5290aac686a5340f5166c74b4e0b.jpg
 
otto85

otto85

Gold Contributor
Member For 4 Years
anendeloflorien said:
Well I saved some money on shipping the Aussies that I wasn't expecting to have so I got myself a new toy today :) white Doge v4 - kind of an impulse buy but I'm dying to try this bad boy out! Any build suggestions? I'm limited to .3 ohm and above since I only have 50 watt regulated mods
Click to expand...
28G dual parallel 7 wraps 2.0id i have that in my doge v2 checks at .33 and is a beast

sent from the back of Otto's bus
 
otto85

otto85

Gold Contributor
Member For 4 Years
Taver13 said:
crap, i forgot to take pictures. let me see if i can explain it, have the coils real low to the deck, and when you hold the wick down to the channels, cut it so its slightly angled and you just want a little tip of it in the channels. less is more when wicking this thing, but you have to have a very little bit in the channels or it will flood
Click to expand...
Works like a charm thanks man

sent from the back of Otto's bus
 
L

Lighty269

Guest
Taver13 said:
crap, i forgot to take pictures. let me see if i can explain it, have the coils real low to the deck, and when you hold the wick down to the channels, cut it so its slightly angled and you just want a little tip of it in the channels. less is more when wicking this thing, but you have to have a very little bit in the channels or it will flood
Click to expand...

And that the way you do it on MTV, money for nothing and the chicks for free
 
You must log in or register to reply here.

VU Sponsors

Top