An Oldie But a Goodie

[AnacondaVapes]

Simple way how to make e juice at home.
The nicotine in this video is older hence a bit oxidized. But it's still Good. Try this recipe at home and I'm sure you're going to love it. Please make some adjustments according to taste.

 

[RMarcusY]

This is the most boring video I've seen in weeks,,,,,,,
Why did you let your nicotine get that way?
OMG you are making this in an open dirty garage....
Don't reuse your nicotine syringe for anything but nicotine.
your sticking your dirty syringe into your bottles of flavor......... the outside of the syringe is dirty,,, your are not even pretending to clean it.
You may need a doctor when you vape that.....
Your facts are wrong.....
Sounds like Adam is an idiot also.

Warning to others NO NOT FOLLOW THESE INSTRUCTIONS

 

[AnacondaVapes]

This is the most boring video I've seen in weeks,,,,,,,
Why did you let your nicotine get that way?
OMG you are making this in an open dirty garage....
Don't reuse your nicotine syringe for anything but nicotine.
your sticking your dirty syringe into your bottles of flavor......... the outside of the syringe is dirty,,, your are not even pretending to clean it.
You may need a doctor when you vape that.....
Your facts are wrong.....
Sounds like Adam is an idiot also.

Warning to others NO NOT FOLLOW THESE INSTRUCTIONS

 

[AnacondaVapes]

You are a complete douchebag. This video is to show beginners how easy it is to make a juice. It's not to show people how to start a company up and use a clean room or a lab environment you freak of nature.

Trust me my friends, you make this it home and you'll be loving life. Hence the name... Don't listen to douchebags like this guy who critiques everyone except him/herself..... Most probably a pissed off competitor of mine.

 

[AnacondaVapes]

Put together a video for the newbies out there who want to start making their own e-juice. Why are you still paying retail? Check out the video and learn how easy it is to mix your own E Liquids at home.

If there should be any nasty comments under this video, you can rest assured though from competitors who don't want you to see this video.

 

[RMarcusY]

Just my opinion, I don't want new member thinking this is the right way to make juice.
You need to learn the right way before you tell others .
We don't want anyone getting hurt.

 

[AnacondaVapes]

Yeah, I get it. But you may want to reconsider and perhaps revising your comments. This video has over 88,000 views and thousands of likes. And here you come along bashing it. You have any idea how many people make Ejuice this exact same way and save money cuz they're sick of paying retail?

Just my opinion, I don't want new member thinking this is the right way to make juice.
You need to learn the right way before you tell others .
We don't want anyone getting hurt.

 

[RMarcusY]

I only viewed you shit because members are reporting your post...
They suggested you are either a spammer or just stupid.
I haven't made up my mind yet.

 

[Heartsdelight]

Put together a video for the newbies out there who want to start making their own e-juice. Why are you still paying retail? Check out the video and learn how easy it is to mix your own E Liquids at home.

If there should be any nasty comments under this video, you can rest assured though from competitors who don't want you to see this video.

This is really nice for beginners!

 

[AnacondaVapes]

Yeah, smart money's on neither. Since spamming by definition would be posting this video over multiple threads on this forum which is not the case. And stupid is the comments that are coming out of your mouth not mine. But I don't want to upset the judge. Maybe you have some other agenda or motives here.... I don't know nor do I care.

 

[voicenyerhed]

I am no expert by any means but... uh, no thank you! I will be sticking to my trial & error method. When I mix I do it in the same conditions I would draw meds for patients; not steril but clean. Also, I have noticed that every flavoring & liquid I have gotten is clear. Why are all of those liquids brown? Not very enticing!

Sent from my SM-N900T using Tapatalk

 

[AnacondaVapes]

I am no expert by any means but... uh, no thank you! I will be sticking to my trial & error method. When I mix I do it in the same conditions I would draw meds for patients; not steril but clean. Also, I have noticed that every flavoring & liquid I have gotten is clear. Why are all of those liquids brown? Not very enticing!

Sent from my SM-N900T using Tapatalk

Like you said... You're no expert!

 

[Squonk]

 

[tonka]

 

[Technician-Est94]

Why are all your ingredients so dark?

Sent from my SM-J320V using Tapatalk

 

[UncleRJ]

Well, I just gotta say, you have gathered a very opinionated audience here.

And they seem to have spoken.

WTF!

No wonder your E-Liquid company is no more.

When I was sent a PM asking me to review your video, at first willing to say that you were off to a good start by putting on gloves before mixing.

And then I saw the condition of your bottles of ingredients , badly oxidized at best and looking like they had been safely stored in used kitty litter in 100 Degree Plus Heat and most likely well beyond "Best Used By Date".

Who knows where the gloves had been stored?

Nic syringes are for Nic ONLY.

Have you ever heard the phrase "Cross Contamination"?

Granted that 99.9 percent of vapers do not have access to a Clean Room or a Licensed Commercial Kitchen.......................

But an Open Garage?

Really?

Granted that I am no EXPERT OR DIY Wizzard by a VERY LOOOOONG shot, but I do keep my mix area and gear SPOTLESS without ANY FORM OF CROSS CONTAMINATION of ANY INGREDIENT until they all meet as planned in my mixing beaker.

And I keep my ingredients properly refrigerated and out of direct sunlight or heat.

Or Kitty Litter.

As for 88,000 video views?

Jet Crashes Into Building.

37,378,649 views
62,865 likes.

And don't forget the Cute Kitten Videos.

 

[AnacondaVapes]

Well, I just gotta say, you have gathered a very opinionated audience here.

And they seem to have spoken.

WTF!

No wonder your E-Liquid company is no more.

When I was sent a PM asking me to review your video, at first willing to say that you were off to a good start by putting on gloves before mixing.

And then I saw the condition of your bottles of ingredients , badly oxidized at best and looking like they had been safely stored in used kitty litter in 100 Degree Plus Heat and most likely well beyond "Best Used By Date".

Who knows where the gloves had been stored?

Nic syringes are for Nic ONLY.

Have you ever heard the phrase "Cross Contamination"?

Granted that 99.9 percent of vapers do not have access to a Clean Room or a Licensed Commercial Kitchen.......................

But an Open Garage?

Really?

Granted that I am no EXPERT OR DIY Wizzard by a VERY LOOOOONG shot, but I do keep my mix area and gear SPOTLESS without ANY FORM OF CROSS CONTAMINATION of ANY INGREDIENT until they all meet as planned in my mixing beaker.

And I keep my ingredients properly refrigerated and out of direct sunlight or heat.

Or Kitty Litter.

Why are all your ingredients so dark?

Sent from my SM-J320V using Tapatalk

My Ejuice company is no more because I sold the recipes for $25,000 2 years ago, if that's any of your business. And I mixed it in the garage cuz I wanted to do a quick video showing people how easy it is to create wonderful flavors in the privacy of their own home. By the way, where do you mix your xxxxxx? Boneheads like you critique people like me cuz you have hidden agendas.

 

[AnacondaVapes]

Why are all your ingredients so dark?

Sent from my SM-J320V using Tapatalk

 

[AnacondaVapes]

Why are all your ingredients so dark?

Sent from my SM-J320V using Tapatalk

Great question, technician. They're dark because their oxidized. It happens. When you buy your flavors they should be clear or somewhat colored, depending on the flavor itself. Again, this video was for informational purposes only. It does have thousands of likes and over 80,000 views.

 

[AnacondaVapes]

I want to thank each and everyone of you posting comments on this thread. It helps a lot. More than you'll ever know. Thanks for the criticisms... Food for thought.

 

[Technician-Est94]

So what your saying is no one should use any ingredients that look like dirty xxxx water? If that is the case why did you make an instructional video doing just that? There are new vapers on these forums ( I myself being one of them) not everyone has common sense, some one is gonna follow your video and get sick.

Sent from my SM-J320V using Tapatalk

 

[UncleRJ]

So what your saying is no one should use any ingredients that look like dirty xxxx water? If that is the case why did you make an instructional video doing just that? There are new vapers on these forums ( I myself being one of them) not everyone has common sense, some one is gonna follow your video and get sick.

Sent from my SM-J320V using Tapatalk

Sorry, even though I am a Mod, I can only like your post once

 

[5150sick]

If you had all new supplies in your video and re-shot the video I think it would do really well.

Lets all be honest. just about ALL eliquid vendors started in their kitchen making juice for themselves and their friends.
Once they heard "This shit is great you should sell this" a dozen or more times that is how they became vendors.

Then AFTER the money started rolling in they reinvested it into the business and got better equipment, clean room, better ingredients, etc...

OP's video was from 2015 and back then all you needed was about 6 to 8 really good recipes, a good web designer to put up a site for you, bottles, labels and you were a mixoloigist and you had your own juice line.

The buy in was so low all you needed was a few hundred bucks and you were in.
It really allowed Americans to pursue the American dream and was a wonderful time for the industry as a whole.

Now you either need an ISO lab or pay a lab to mix up your juice for you and the buy in is much higher.

But in my opinion if you did re-shoot this video with all fresh ingredients and nic, then put in a paragraph in the description about how this video is for beginners to teach them how to safety mix eliquid for DIY I think you would really have an excellent tutorial.

You were really close to being on to something OP but the old oxidized nic may have turned off a lot of would be DIYers.

Thank you for posting the video and asking for feedback.

 

[AnacondaVapes]

If you had all new supplies in your video and re-shot the video I think it would do really well.

Lets all be honest. just about ALL eliquid vendors started in their kitchen making juice for themselves and their friends.
Once they heard "This shit is great you should sell this" a dozen or more times that is how they became vendors.

Then AFTER the money started rolling in they reinvested it into the business and got better equipment, clean room, better ingredients, etc...

OP's video was from 2015 and back then all you needed was about 6 to 8 really good recipes, a good web designer to put up a site for you, bottles, labels and you were a mixoloigist and you had your own juice line.

The buy in was so low all you needed was a few hundred bucks and you were in.
It really allowed Americans to pursue the American dream and was a wonderful time for the industry as a whole.

Now you either need an ISO lab or pay a lab to mix up your juice for you and the buy in is much higher.

But in my opinion if you did re-shoot this video with all fresh ingredients and nic, then put in a paragraph in the description about how this video is for beginners to teach them how to safety mix eliquid for DIY I think you would really have an excellent tutorial.

You were really close to being on to something OP but the old oxidized nic may have turned off a lot of would be DIYers.

Thank you for posting the video and asking for feedback.

Wow! Thank you! Sounds like a plan. But again, this was for demonstration purposes only. Like I said, over 88,000 YouTube views so far and growing. And dot dot dot all these comments helps. What a lot of these guys on the Forum are upset about is not so much the color of the liquids or the setting of where I did the mixing, but what really gets them, is this video brings me in more money a month than most of them make a year. It's all about competition. Most people have to read between the lines on the forums like this. Lot of my competition sit back and wait for post of mine so they can smash them. They're just sore losers that's all.

 

[Technician-Est94]

Sorry, even though I am a Mod, I can only like your post once

Thank you

Sent from my SM-J320V using Tapatalk

 

[Technician-Est94]

If you had all new supplies in your video and re-shot the video I think it would do really well.

Lets all be honest. just about ALL eliquid vendors started in their kitchen making juice for themselves and their friends.
Once they heard "This shit is great you should sell this" a dozen or more times that is how they became vendors.

Then AFTER the money started rolling in they reinvested it into the business and got better equipment, clean room, better ingredients, etc...

OP's video was from 2015 and back then all you needed was about 6 to 8 really good recipes, a good web designer to put up a site for you, bottles, labels and you were a mixoloigist and you had your own juice line.

The buy in was so low all you needed was a few hundred bucks and you were in.
It really allowed Americans to pursue the American dream and was a wonderful time for the industry as a whole.

Now you either need an ISO lab or pay a lab to mix up your juice for you and the buy in is much higher.

But in my opinion if you did re-shoot this video with all fresh ingredients and nic, then put in a paragraph in the description about how this video is for beginners to teach them how to safety mix eliquid for DIY I think you would really have an excellent tutorial.

You were really close to being on to something OP but the old oxidized nic may have turned off a lot of would be DIYers.

Thank you for posting the video and asking for feedback.

Great suggestion, except cross contamination is not safe

Sent from my SM-J320V using Tapatalk

 

[5150sick]

Great suggestion, except cross contamination is not safe

Sent from my SM-J320V using Tapatalk

This is true. I stick to using a blunt tip syringe for nicotine base only.
I have different measuring devices and methods for flavorings and do my VG by measuring cup.

I do not add PG to my mixes but use PG based Nic since it lasts longer in and out of the freezer than VG based nic.
Then the PG in the flavorings bring my mixes to around 20/80 to 25/75 PG/VG

I also NEVER add water to my mixes because water crackles and spits back burning juice onto ones lips and it also gunks up coils almost as bad a sweeteners.

 

[voicenyerhed]

Wow! Thank you! Sounds like a plan. But again, this was for demonstration purposes only. Like I said, over 88,000 YouTube views so far and growing. And dot dot dot all these comments helps. What a lot of these guys on the Forum are upset about is not so much the color of the liquids or the setting of where I did the mixing, but what really gets them, is this video brings me in more money a month than most of them make a year. It's all about competition. Most people have to read between the lines on the forums like this. Lot of my competition sit back and wait for post of mine so they can smash them. They're just sore losers that's all.

And the motive is revealed... The more hits you get on your videos the more you attract advertisers, even if it's bad publicity bringing the viewers it still gets you the number count. You're trolling. Bye now.

Sent from my SM-N900T using Tapatalk

 

[pulsevape]

This is true. I stick to using a blunt tip syringe for nicotine base only.
I have different measuring devices and methods for flavorings and do my VG by measuring cup.

I do not add PG to my mixes but use PG based Nic since it lasts longer in and out of the freezer than VG based nic.
Then the PG in the flavorings bring my mixes to around 20/80 to 25/75 PG/VG

I also NEVER add water to my mixes because water crackles and spits back burning juice onto ones lips and it also gunks up coils almost as bad a sweeteners.

what do you mean PG nic base, last longer than VG nic base.

 

[AnacondaVapes]

And the motive is revealed... The more hits you get on your videos the more you attract advertisers, even if it's bad publicity bringing the viewers it still gets you the number count. You're trolling. Bye now.

Sent from my SM-N900T using Tapatalk

 

[AnacondaVapes]

And the motive is revealed... The more hits you get on your videos the more you attract advertisers, even if it's bad publicity bringing the viewers it still gets you the number count. You're trolling. Bye now.

Sent from my SM-N900T using Tapatalk

Oh look everybody! Another commie dooche

 

[conanthewarrior]

It is good you are trying to help people get into DIY, but you do need to stick to basics to stay healthy, and this is coming from someone who used similar syringes for a different purpose years ago.

You mentioned the nicotine being oxidised in your first post, so must have known some people were going to mention the colour of everything- you can't really then go on to insult people who bring this up if even you yourself knew it looked bad.

 

[AnacondaVapes]

It is good you are trying to help people get into DIY, but you do need to stick to basics to stay healthy, and this is coming from someone who used similar syringes for a different purpose years ago.

You mentioned the nicotine being oxidised in your first post, so must have known some people were going to mention the colour of everything- you can't really then go on to insult people who bring this up if even you yourself knew it looked bad.

You seem to be the only one who realizes that I did mention about the oxidation on the first post yet everyone wants to bash the crap out of the video yet this video out performs anything they could possibly come up with. I fight fire with fire.

 

[conanthewarrior]

You seem to be the only one who realizes that I did mention about the oxidation on the first post yet everyone wants to bash the crap out of the video yet this video out performs anything they could possibly come up with. I fight fire with fire.

I do think it is great that you are sharing things with others and trying to help, but please realise there are a lot of well known juice vendors, companies, DIY enthusiasts Etc on here, some of the biggest around, so claiming your video "outperforms anything they could possibly come up with" is a very bold statement.

Anyone can use dirty equipment to make things on video, and as the video is intended for new DIY'ers they won't realise the mistake. People on here will though.

 

[bobnat]

Yeah, smart money's on neither. Since spamming by definition would be posting this video over multiple threads on this forum which is not the case. And stupid is the comments that are coming out of your mouth not mine. But I don't want to upset the judge. Maybe you have some other agenda or motives here.... I don't know nor do I care.

You may think you're winning in the DIY arena, but you've already lost in the human arena.

 

[AnacondaVapes]

I do think it is great that you are sharing things with others and trying to help, but please realise there are a lot of well known juice vendors, companies, DIY enthusiasts Etc on here, some of the biggest around, so claiming your video "outperforms anything they could possibly come up with" is a very bold statement.

Anyone can use dirty equipment to make things on video, and as the video is intended for new DIY'ers they won't realise the mistake. People on here will though.

Yes, I certainly understand that. As a matter of fact, most of those vendors work closely with me. Obviously none of them would make comments such as these know-it-alls. Again, this video was for informational purposes only. And by the way. I know of about five vendors that started out making their own lines after watching my videos. And yet again, over 80,000 video views and thousands of likes? I must be doing something the people like.

 

[voicenyerhed]

Oh look everybody! Another commie dooche

If you're going to insult me at least spell it correctly... It's "douche", not "dooche".

Sent from my SM-N900T using Tapatalk

 

[AnacondaVapes]

I do think it is great that you are sharing things with others and trying to help, but please realise there are a lot of well known juice vendors, companies, DIY enthusiasts Etc on here, some of the biggest around, so claiming your video "outperforms anything they could possibly come up with" is a very bold statement.

Anyone can use dirty equipment to make things on video, and as the video is intended for new DIY'ers they won't realise the mistake. People on here will though.

Yes, I certainly understand that. As a matter of fact, most of those vendors work closely with me. Obviously none of them would make comments such as these know-it-alls. Again, this video was for informational purposes only. And by the way. I know of about five vendors that started out making their own lines after watching my videos. And yet again, over 80,000 video views and thousands of likes? I must be doing something the people like.

 

[AnacondaVapes]

I do think it is great that you are sharing things with others and trying to help, but please realise there are a lot of well known juice vendors, companies, DIY enthusiasts Etc on here, some of the biggest around, so claiming your video "outperforms anything they could possibly come up with" is a very bold statement.

Anyone can use dirty equipment to make things on video, and as the video is intended for new DIY'ers they won't realise the mistake. People on here will though.

Yes, I certainly understand that. As a matter of fact, most of those vendors work closely with me. Obviously none of them would make comments such as these know-it-alls. Again, this video was for informational purposes only. And by the way. I know of about five vendors that started out making their own lines after watching my videos. And yet again, over 80,000 video views and thousands of likes? I must be doing something the people like.

 

[AnacondaVapes]

If you're going to insult me at least spell it correctly... It's "douche", not "dooche".

Sent from my SM-N900T using Tapatalk

My apologies and thank you for the correction, douche

 

[conanthewarrior]

Yes, I certainly understand that. As a matter of fact, most of those vendors work closely with me. Obviously none of them would make comments such as these know-it-alls. Again, this video was for informational purposes only. And by the way. I know of about five vendors that started out making their own lines after watching my videos. And yet again, over 80,000 video views and thousands of likes? I must be doing something the people like.

So none of the vendors you work with would mention to you about re using the syringe from the nicotine with your flavourings? People are only mentioning these things so others know not to do it- they could of course follow your instructions of how much of each ingredient to use to make up some nice juice though, which is what I think is good in that you are helping people get into DIY juice making. New people will be thankful for that, which is why you have so many views and likes, I am not arguing that fact by any means.

You do have to expect some comments though, wether good or bad, especially if you already knew these things which I am sure you do. People will point out mistakes so others don't themselves make them.

 

[AnacondaVapes]

You may think you're winning in the DIY arena, but you've already lost in the human arena.

LOL! Oh look. The " I barely graduated high school" department just chimed in. Haters Gonna Hate until they ask you if you're hiring!

 

[KingPin!]

Video wasn't THAT bad guys? Although bit too much self promotion in there but I've seen far worse

My observations Anaconda

Keep camera on what youre doing rather than you after the intro couldn't see what you were doing half the time just what you were saying

Get rid of those bottles and replace them I know you said labels were messed up in the vid but to me looks like they have been sitting for a long time to have that kind of damage to them

Lay out syringes next to bottles you use (I have my Nic, VG, PG in a line with thier own syringes in front of them) I use separate syringe for flavours so as not to cross contaminate too much

Maybe pick the kitchen instead of the garage it's not like you actually need ventilation there's no toxic fumes coming from the mixture just gives that more sterile environment feel to future vids

A lot of people talk about freezing thier stuff I personally don't as I don't have the room to do it my juice is fine although I do keep everything in a dark cool place

Maybe spend a bit more time talking about measuring in ml vs other methods and what %s mean etc especially the nic bit cause if people shag the nic part up can be bad news for them

Otherwise good info vid for the newbies

 

[AnacondaVapes]

Video wasn't THAT bad guys? Although bit too much self promotion in there but I've seen far worse

My observations Anaconda

Keep camera on what youre doing rather than you after the intro couldn't see what you were doing half the time just what you were saying

Get rid of those bottles and replace them I know you said labels were messed up in the vid but to me looks like they have been sitting for a long time to have that kind of damage to them

Lay out syringes next to bottles you use (I have my Nic, VG, PG in a line with thier own syringes in front of them) I use separate syringe for flavours so as not to cross contaminate too much

Maybe pick the kitchen instead of the garage it's not like you actually need ventilation there's no toxic fumes coming from the mixture just gives that more sterile environment feel to future vids

A lot of people talk about freezing thier stuff I personally don't as I don't have the room to do it my juice is fine although I do keep everything in a dark cool place

Maybe spend a bit more time talking about measuring in ml vs other methods and what %s mean etc especially the nic bit cause if people shag the nic part up can be bad news for them

Otherwise good info vid for the newbies

Thank you, KingPin! I knew, somewhere out there, were some people with sense. Thank you for the recommendations and I will try to incorporate them in videos to come. Have a great day my brother.

 

[conanthewarrior]

@KingPin! I agree I have seen much worse, and I do think it is good the guy is introducing people to DIY.

I just don't think it's right when people notice things that are wrong, even things the OP has mentioned so knows about, and tells the OP there is a problem for them to insult people left right and centre.

Many videos get millions of views online, it doesn't mean they are good. Just look at a Justin Bieber video- millions of views and hundreds of thousands of likes.

It just seems like the OP expected people running with open arms when he knew there was problems with his video, and acted a bit of a wanker afterwards lol.

 

[bobnat]

@KingPin!
It just seems like the OP expected people running with open arms when he knew there was problems with his video, and acted a bit of a wanker afterwards lol.

Are you British? If not, you could give them a lesson or two in understatements.

 

[bobnat]

LOL! Oh look. The " I barely graduated high school" department just chimed in. Haters Gonna Hate until they ask you if you're hiring!

Most of the respondents are being helpful. You post a video that has issues. The issues are pointed out and instead of engaging in an exchange with an open mind you engage in ad hominem. You're emotionally stunted, insecure and basically the kind of person that most will avoid. But you have 88,000 views. More power to you.

 

[AnacondaVapes]

Most of the respondents are being helpful. You post a video that has issues. The issues are pointed out and instead of engaging in an exchange with an open mind you engage in ad hominem. You're emotionally stunted, insecure and basically the kind of person that most will avoid. But you have 88,000 views. More power to you.

Nahhh. Just a bunch of Haters.

 

[AnacondaVapes]

FYI. The flavorings and ingredients I used in this video we're all purchased through MyFreedomSmokes. They tend to turn on you after a bit. I no longer recommend My Freedom Smokes. I have a brand new One Stop Shop that I use exclusively now and you can find it in my video.

 

[conanthewarrior]

Are you British? If not, you could give them a lesson or two in understatements.

Haha, yeah I am from England. I live on a little Island called Canvey Island in essex, about 30 minutes or so to the East of London.