Aromamizer glass cyclone help

[mreeveshp]

I got the glass cyclone because reviews all said how great the flavor is. The problem is when I use it I get a strong metallic flavor that tastes horrible and the metal part with the fins is starting to become discolored at the bottom near the coils.

I have the coils built low so they are close to the deck and away from the bottom of the fin section. I will try to get good pictures to post.

I'm running a twisted at .32 ohms and 35 watts.

Any help on why I'm getting the metal flavor would be greatly appreciated

Sent from my VS990 using Tapatalk

 

[Khassy]

Have you cleaned it? Could be machine oil.

 

[Everpresentnewb]

could be a hot spot on your coils getting redhot as you hit it. Ive had that happen a few times. Or a coil touching the chamber wall. Not familiar with your device, but things i have found cause that.

 

[mreeveshp]

could be a hot spot on your coils getting redhot as you hit it. Ive had that happen a few times. Or a coil touching the chamber wall. Not familiar with your device, but things i have found cause that.

I checked again and there isn't a single hot spot and good gaps between the coils and the deck and the coils and the fin section. I have used it on my Fuchai, Tarot 200w, and xcube mini all around 25-32 watts so barely pushing a .32 ohm build

Sent from my VS990 using Tapatalk

 

[mreeveshp]

Have you cleaned it? Could be machine oil.

I didn't clean it when I got it just because I have never once had a problem with machine oil with any atty I have always just built and vaped so I'm going to try running water over all the parts.

I am still trying to get good pictures showing the bottom of the fin section closest to the coils turning a brownish color. Even though I'm barely pushing the coils

Sent from my VS990 using Tapatalk