Hi Vaping Underground members, In this review i take a look at the Almighty Complete Kit from Asmodus. The Almighty Complete Kit was supplied for the purpose of this review by Saly from Asmodus.
https://www.asmodus.com/collections/sing...mplete-kit
Introduction
Asmodus, who brought us the minikin are an affordable high end American Manufacturer. The Almighty 100 is a 100W single battery device that accommodates either a 21700, 20700 or 18650 (with supplied adaptor) battery. It operates using a colour touchscreen by a series of swipes and presses which will be familiar to those that have used previous Asmodus touchscreen devices. It features a full TC suite and both TCR and TFR options as well as curves and plenty of customisation features. The device has a build quality in my opinion well above it's price tag and again in my opinion is quite a looker. In this kit it comes paired with the fine looking weighty Viento Sub-ohm Tank which features a lower protective ring, slide open top-fill and is baby beast coils compatible, so let's give the pair a good look!
___________________________________________________________________
In The Box
Contents:
1x asMODus Amighty 100W box mod
1x asMODus Viento sub ohm tank
2x 0.15Ω Mesh coil heads
1x Micro USB cable
1x Spare parts bag
1x Spare glass
1x Warranty card
2x User manual
___________________________________________________________________
Aesthetics and Ergonomics
The Almighty 100 Kit came in cardboard box packaging with viewing window allowing for the device to be seen without opening. I do not like the Black/Red version of the Almighty 100 as i find the "ASMODUS" in bright Red on Black just too in the face but as far as i am aware the Kit only comes in either Black/Black and the one i received which is the Gunmetal Chrome version which has a stunning mirrored finish but is a fingerprint magnet. The spine of the device is very curved and has a Carbon fiber finish with the Asmodus logo cleverly incorporated within it. On both sides we have "ASMODUS" carved into the metal and some of the carbon fiber of the spine visible. The face of the device has the top of the device protruding outwards then underneath this protruding section is a square fire button which sits flush and has the Asmodus logo etched central with enough depth to give a textured feel to help find the button when in use. At the bottom of the face of the device is the micro USB port then central is a large colour touchscreen. The base of the device has etched safety stamps and generous venting then moving to the top we have some impressive real estate for a single battery device. We have a 510 plate which is raised just enough to protect the finish while not giving noticeable gaping and we have a Silver plated, spring loaded 510. Despite the 510 being brought forward and not central the protruding front section allows for up to 30mm atty's to fit with no overhang whatsoever. The build quality and finish is amongst the best i have come across and aesthetically the Almighty 100 really floats my boat.
___________________________________________________________________
Viento Sub Ohm Tank Specs and Features:
26.9mm diameter
High quality stainless steel and pyrex construction
Removable protective ring
3.5mL juice capacity (WITH Stock Glass)
5mL juice capacity Glass (Sold separately)
2mL juice capacity (EURO TPD COMPLIANT)
Compatible with SMOK Baby Beast coil heads
Sliding hinged top fill mechanism
Snakeskin patterned wide bore 810 Delrin drip tip
510 connection
Colour: Gunmetal
___________________________________________________________________
Viento Overview
The Viento is a very solid, well built sub-ohm tank which has quite some weight to it and as far as i am aware is only available in a very shiny Gunmetal which suits the Gunmetal Chrome device i received. Up top we have a cobra style 810 which has o-rings so goon style drip tips won't fit and the Viento employs a top-fill method of sliding to one side which also rotates the top-cap to reveal a fill port (their is an arrow to show where to push). The top-cap doesn't lock in place but instead is a very tight fit and isn't going to open of it's own accord. The coil screws into the base and the top of the coil screws on to the air pipe which holds the tank securely together, the 3.5ml glass section (there is a 2ml TPD version which i guess has a capacity reducing bung) is secured top and bottom with o-rings and also there is a metal ring with a design that covers the bottom section of the glass, this ring slots onto the base and adds an aesthetic touch while also giving the glass some protection if the tank is dropped. Not included there is also a 5ml bubble glass available which i assume will not allow for the protective ring to be fitted. The very base of the Viento is 25mm but the airflow control ring tapers out making it about 27mm in diameter, the airflow control ring has tri-cyclops with stoppers and moves with a perfect tolerance. You get 2 identical coils included which are 0.15ohm single mesh with a rating of 40-75W and best at 50-65W, one of the biggest pros of the Viento is that it is compatible with Baby beast coils so loads of coil options are available.
___________________________________________________________________
Almighty 100 Specs and Features:
Powered By GX-100UTC
Supports 3 types of batteries (Not included) : 1x 18650 or 1x 20700 or 1x 21700
Output Power Range: (Power Mode) 5.0w - 100.0w
Output Power Range: (Temperature Control) 5.0w - 60.0w
Resistance Range: 0.1Ω - 3.0Ω
Temperature Control Range: 212°F - 572°F / 100℃ - 300℃
Supports TFR, TCR, and Curve Mode
Supports Puff Clear and Limit Functionality
Upgradeable firmware support
Maximum Output Voltage: 7.5 Volts
Maximum Output Current: 35.0 AMPS
Charging Parameter: DC 5V/1A
Display operating current 25mA
Standby operating current < 350uA
Standby time: 3s ~ 60s
Firing cut Off time: 10s
Work Efficiency: 94%
Colours: Gradient Blue Purple, Gunmetal Chrome, Black/Red, Black/Black
___________________________________________________________________
Fitting The Battery
The Almighty will accommodate a 21700, 20700 or 18650 (with supplied adaptor) and to install simply pull off the spine of the device which like the Colossal is just press fitted into place which is metal slid over metal relying on the build quality precision to fit securely and yet again a suburb job has been done as the fit is perfect with no movement or rattles whatsoever (great way of securing the battery panel (spine)). The battery fits in place tightly with the spring loaded contact rounded to avoid damaging your wrap, all round a very good job! My only con is orientation is Black on Black and would much prefer it in White so it was much more visible.
___________________________________________________________________
Review Continued Below:
https://www.asmodus.com/collections/sing...mplete-kit
Introduction
Asmodus, who brought us the minikin are an affordable high end American Manufacturer. The Almighty 100 is a 100W single battery device that accommodates either a 21700, 20700 or 18650 (with supplied adaptor) battery. It operates using a colour touchscreen by a series of swipes and presses which will be familiar to those that have used previous Asmodus touchscreen devices. It features a full TC suite and both TCR and TFR options as well as curves and plenty of customisation features. The device has a build quality in my opinion well above it's price tag and again in my opinion is quite a looker. In this kit it comes paired with the fine looking weighty Viento Sub-ohm Tank which features a lower protective ring, slide open top-fill and is baby beast coils compatible, so let's give the pair a good look!
___________________________________________________________________
In The Box
Contents:
1x asMODus Amighty 100W box mod
1x asMODus Viento sub ohm tank
2x 0.15Ω Mesh coil heads
1x Micro USB cable
1x Spare parts bag
1x Spare glass
1x Warranty card
2x User manual
___________________________________________________________________
Aesthetics and Ergonomics
The Almighty 100 Kit came in cardboard box packaging with viewing window allowing for the device to be seen without opening. I do not like the Black/Red version of the Almighty 100 as i find the "ASMODUS" in bright Red on Black just too in the face but as far as i am aware the Kit only comes in either Black/Black and the one i received which is the Gunmetal Chrome version which has a stunning mirrored finish but is a fingerprint magnet. The spine of the device is very curved and has a Carbon fiber finish with the Asmodus logo cleverly incorporated within it. On both sides we have "ASMODUS" carved into the metal and some of the carbon fiber of the spine visible. The face of the device has the top of the device protruding outwards then underneath this protruding section is a square fire button which sits flush and has the Asmodus logo etched central with enough depth to give a textured feel to help find the button when in use. At the bottom of the face of the device is the micro USB port then central is a large colour touchscreen. The base of the device has etched safety stamps and generous venting then moving to the top we have some impressive real estate for a single battery device. We have a 510 plate which is raised just enough to protect the finish while not giving noticeable gaping and we have a Silver plated, spring loaded 510. Despite the 510 being brought forward and not central the protruding front section allows for up to 30mm atty's to fit with no overhang whatsoever. The build quality and finish is amongst the best i have come across and aesthetically the Almighty 100 really floats my boat.
___________________________________________________________________
Viento Sub Ohm Tank Specs and Features:
26.9mm diameter
High quality stainless steel and pyrex construction
Removable protective ring
3.5mL juice capacity (WITH Stock Glass)
5mL juice capacity Glass (Sold separately)
2mL juice capacity (EURO TPD COMPLIANT)
Compatible with SMOK Baby Beast coil heads
Sliding hinged top fill mechanism
Snakeskin patterned wide bore 810 Delrin drip tip
510 connection
Colour: Gunmetal
___________________________________________________________________
Viento Overview
The Viento is a very solid, well built sub-ohm tank which has quite some weight to it and as far as i am aware is only available in a very shiny Gunmetal which suits the Gunmetal Chrome device i received. Up top we have a cobra style 810 which has o-rings so goon style drip tips won't fit and the Viento employs a top-fill method of sliding to one side which also rotates the top-cap to reveal a fill port (their is an arrow to show where to push). The top-cap doesn't lock in place but instead is a very tight fit and isn't going to open of it's own accord. The coil screws into the base and the top of the coil screws on to the air pipe which holds the tank securely together, the 3.5ml glass section (there is a 2ml TPD version which i guess has a capacity reducing bung) is secured top and bottom with o-rings and also there is a metal ring with a design that covers the bottom section of the glass, this ring slots onto the base and adds an aesthetic touch while also giving the glass some protection if the tank is dropped. Not included there is also a 5ml bubble glass available which i assume will not allow for the protective ring to be fitted. The very base of the Viento is 25mm but the airflow control ring tapers out making it about 27mm in diameter, the airflow control ring has tri-cyclops with stoppers and moves with a perfect tolerance. You get 2 identical coils included which are 0.15ohm single mesh with a rating of 40-75W and best at 50-65W, one of the biggest pros of the Viento is that it is compatible with Baby beast coils so loads of coil options are available.
___________________________________________________________________
Almighty 100 Specs and Features:
Powered By GX-100UTC
Supports 3 types of batteries (Not included) : 1x 18650 or 1x 20700 or 1x 21700
Output Power Range: (Power Mode) 5.0w - 100.0w
Output Power Range: (Temperature Control) 5.0w - 60.0w
Resistance Range: 0.1Ω - 3.0Ω
Temperature Control Range: 212°F - 572°F / 100℃ - 300℃
Supports TFR, TCR, and Curve Mode
Supports Puff Clear and Limit Functionality
Upgradeable firmware support
Maximum Output Voltage: 7.5 Volts
Maximum Output Current: 35.0 AMPS
Charging Parameter: DC 5V/1A
Display operating current 25mA
Standby operating current < 350uA
Standby time: 3s ~ 60s
Firing cut Off time: 10s
Work Efficiency: 94%
Colours: Gradient Blue Purple, Gunmetal Chrome, Black/Red, Black/Black
___________________________________________________________________
Fitting The Battery
The Almighty will accommodate a 21700, 20700 or 18650 (with supplied adaptor) and to install simply pull off the spine of the device which like the Colossal is just press fitted into place which is metal slid over metal relying on the build quality precision to fit securely and yet again a suburb job has been done as the fit is perfect with no movement or rattles whatsoever (great way of securing the battery panel (spine)). The battery fits in place tightly with the spring loaded contact rounded to avoid damaging your wrap, all round a very good job! My only con is orientation is Black on Black and would much prefer it in White so it was much more visible.
___________________________________________________________________
Review Continued Below:
