Aspire Flexus Pro
I am very happy to announce that I am officially collaborating with Aspire and reviewing their products. Today I bring you one of them, in fact, it has not even been released on the market yet nor has it been announced by Aspire. I suppose that some of you know the Flexus POD type device, well, an improved version arrives, with a screen, air regulation and other extras. It has a 1200mAh battery that charges at 2A, interchangeable coils instead of disposable cartridges... Among other things, let's give way to the review.
Not before thanking Tina from Aspire for sending me the product, I recommend visiting her page and the Flexus Pro page when it is available.
Not before thanking Tina from Aspire for sending me the product, I recommend visiting her page and the Flexus Pro page when it is available.
Packaging
The product is included within this rectangular box. The predominant color is white, with some metallic waves superimposed on it. At the top we find the brand, Aspire, in large. Below we see the product model and the slogan, ``Stay Pro Stay Ahead´´. In addition, we are left with a small window to observe the product before opening it, I have always liked this a lot.
On one of the sides we find the main features, we will see later if it fulfills what was promised or not. The wave decoration and the soft color are maintained as predominant.
On one of the sides we find the main features, we will see later if it fulfills what was promised or not. The wave decoration and the soft color are maintained as predominant.
On the back of the box the first thing we find is a warning regarding minors and children. Just after a brief description of the Aspire brand. The rest is the contents of the box, contact addresses and a few warnings.
In the box;
1* Flexus Pro Device
1* Flexus Pro Pod
1* AF Meshed Coil 0.6Ω
1* AF Meshed Coil 1.0Ω
1* Type-C Cable
1* User Manual
They give us the opportunity to test between two of their AF Coils, something that any brand should do.
I can't say much about the packaging, it's simple but effective and pretty. Personally, I would be attracted to it if I saw it in a store. I like it.
In the box;
1* Flexus Pro Device
1* Flexus Pro Pod
1* AF Meshed Coil 0.6Ω
1* AF Meshed Coil 1.0Ω
1* Type-C Cable
1* User Manual
They give us the opportunity to test between two of their AF Coils, something that any brand should do.
I can't say much about the packaging, it's simple but effective and pretty. Personally, I would be attracted to it if I saw it in a store. I like it.
Once the box is opened and all the essential content for vaping is organized, we find the device with its respective cartridge, a spare coil and the Type-C cable. What else do we need to start vaping? (but, I recommend reading the user manual to anyone who buys any device to learn about its functions and warnings).
Device Inspection
The product has a rectangular shape with very rounded edges and is stick type. What impressed me the most was its color, it is impressive, depending on where we look at it, it will make a holographic pattern. In this way, depending on how we look at it and how the light shines on it, we will observe the same decoration as on the box, like a kind of waves. I loved the color.
As such we have two parts, a central area delimited by the edges, where we will find the button and the screen and then, the structure. In the central area we find a fade from dark to light from bottom to top, which fascinates me. The choice of colors on this device is a 10/10.
The button is in the upper central area and the screen in the lower left area, it is rectangular in shape and requires a lot of pressure to work, in addition, it clicks, which depending on the person can be good or bad. We will have to rotate the device 90º to see the information that the screen shows us in the correct way, if not, we will see it the other way around.
As for the button functions, they are very simple;
5 Clicks - ON/OFF
4 Clicks - Switch between A,B or AB mode
3 Clicks - Wattage change mode, rising in one watt increments up to 30W and then restarting at 5W
Let's talk about modes;
A - It means AUTO, which will allow us to operate the device only with the assisted puff.
B - It means BUTTON, which will allow us to operate the device only with the button.
AB- It is a combination between AUTO and BUTTON, this will allow you to activate the device in both ways.
As such we have two parts, a central area delimited by the edges, where we will find the button and the screen and then, the structure. In the central area we find a fade from dark to light from bottom to top, which fascinates me. The choice of colors on this device is a 10/10.
The button is in the upper central area and the screen in the lower left area, it is rectangular in shape and requires a lot of pressure to work, in addition, it clicks, which depending on the person can be good or bad. We will have to rotate the device 90º to see the information that the screen shows us in the correct way, if not, we will see it the other way around.
As for the button functions, they are very simple;
5 Clicks - ON/OFF
4 Clicks - Switch between A,B or AB mode
3 Clicks - Wattage change mode, rising in one watt increments up to 30W and then restarting at 5W
Let's talk about modes;
A - It means AUTO, which will allow us to operate the device only with the assisted puff.
B - It means BUTTON, which will allow us to operate the device only with the button.
AB- It is a combination between AUTO and BUTTON, this will allow you to activate the device in both ways.
The screen shows us the information in a very clear and direct way. On the left side we will find the battery percentage. In the center and largest, we will find the wattage at which we are vaping. On the right we will find a Ω indicator and a seconds counter that lasts the puff, reaching a maximum of 7s.
I must say that the brightness of this one is very good, both during the day and at night.
I must say that the brightness of this one is very good, both during the day and at night.
In the rear area I don't have much to comment. The same style is maintained as in the front, two parts separated by limits. Below we see the brand logo and the product model.
Well, we get to the side, here we will find an air inlet formed by a single very large hole that we can progressively close. Here comes my complaint, the air intake requires so much force that it cannot be adjusted precisely, it will probably give way with more use, but it should be fine from the first moment.
Otherwise, it doesn't work badly as such, it filters well and the impact is more noticeable when it is closed, but it should require a little less force.
Otherwise, it doesn't work badly as such, it filters well and the impact is more noticeable when it is closed, but it should require a little less force.