Hi Vaping Underground members, In this review i take a look at the Hita Ink Pod Mod Kit from Asvape. The Asvape Hita Ink Pod Mod Kit was supplied free of charge for the purpose of this review by the Healthcabin.
https://www.healthcabin.net/asvape-hita-...25552.html
Introduction
Asvape were founded in 2016 and have never in their 4 years of manufacturing flooded the market with countless products but tend to focus more on quality at an affordable price and have released a few gems in their portfolio. The idea behind the Hita Ink is combining three previous Asvape devices, the Hita Pod mod with the form factor of the Strider and the illustration style of the Michael. The Hita Ink makes use of the previous Hita pod and coil heads including the RBA while introducing the new 0.3ohm coil head. The power only simple device has fully adjustable airflow, a type C USB and comes with a choice of illustrated finishes with either a Silver or Black frame, let's check it out!!!!
___________________________________________________________________
In The Box
Contents:
Asvape Hita Ink mod
Pod
0.3ohm Mesh coil
1.0ohm Mesh coil
2x Drip tip (MTL & RDL)
Type C USB Cable
Warranty Card
Social Media Card
User manual
___________________________________________________________________
Aesthetics and Ergonomics
The Hita Ink comes in a presentation box with everything neatly placed in their own compartments. The device is a mini pod mod which just gets swallowed up by the hand having a cylindrical spine and classic C-frame form factor, very ergonomic!!!! There is a plain Black option for those not into their illustrations but i am fine with these as they are not exactly Mickey Mouse or Scooby Doo but based on Chinese Mythology so are cultural! I received the Tao Wu design with a Silver frame, the design options are Quiong Qi, Tao Tie, Tao Wu or Hun Dun and come in a choice of Black or Silver frame.
The device at 100g is a nice weight and the design is raised and has a slightly rubberised feel to it. I am not exactly sure what the coating is but these raised designs and coating are also what we have seen on the Asvape Micheal, VSticking VK530 and Pioneer 4You iPV V-IT, so if anyone knows exactly how these raised coatings are done and what the tactile coating is i am sure people would love to know!
On the face we have a Black domed fire button then further down two side by side smaller domed navigational buttons. Between the fire and navigational buttons we have a large display and then right at the bottom a Type C USB port. On the base we have printed safety stamps and branding then moving up top we have the polished amber pod protruding, on the device each side towards the top we have a small airflow slot.
The device is extremely well made and i must admit when i first opened the box i immediately said to myself "this is nice"!
___________________________________________________________________
Hita Ink Specs and Features:
Material: Zinc Alloy Frame
Dimensions: 91*34*28 (Including pod and a supplied drip tip)
Weight: 100g
Battery: 1500mah built-in battery
Capacity: 3ml (TPD Version 2ml)
Output: 5-40W
Resistance coils supplied: 0.3ohm/1.0ohm
Input voltage: 3.3-4.2V
Resistance range: 0.2-3.0ohm
Charging voltage: 5V
Charging current: 1A
Standby current: 0uA
Colour/Design: All Black, Black frame with Quiong Qi, Tao Tie, Tao Wu or Hun Dun mythological design. Silver frame with Quiong Qi, Tao Tie, Tao Wu or Hun Dun mythological design
___________________________________________________________________
The Pod
The pod is cylindrical and up top we have a raised 510 fitting with pre-installed 510 tip which is more frosted than the polished pod and has an inner bore suited for a RDL vape. In the bag of goodies you also receive a more polished tip with very narrow MTL bore but you can also fit your own 510 if you prefer although due to the raised fitting some might look a bit funky although i found the Expromizer drip tip looks and works great with it. On the pictures you can also see how the coil head is also the chimney and just how close it is to your mouth so the vaper has very little distance to travel.
The pod is very transparent and most protrudes outside the device so your e-liquid level can be seen at all times. To one side we have a Black Silicone plug with an arrow showing where to lift and once lifted a generous fill port is revealed, you need the pod on it's side but it can be filled quickly and mess free!
Moving to the base with the 0.3ohm coil head pre-installed we can see the central positive and negative ring and then an outer magnetic ring which is fixed to the retaining base ring which is removable.
___________________________________________________________________
Fitting The Coil Head
The pod has a retainer ring on the base which attaches to the pod with a bayonet fitting, this ring both contains the airflow and makes the pod much more leak resistant than similar designs. The new 0.3ohm coil head comes as one but with the 1.0ohm coil head the lower base section unscrews so don't throw this bottom section as this is needed when getting more of the 1.0ohm coil heads, this bottom section is also included if buying a spare empty pod! The pod assembly just gets press fitted into the pod and then the retainer ring needs a quarter of a turn to secure in place.
As well as the included 1.0ohm coil head and 0.3ohm coil head there is also a 0.6ohm coil head and an RBA. I don't have the RBA but it seems to come with an adaptor to build and pulse your coils using the Hita Ink and looks just like any other 510 pod mod adaptor so i assume using this you could also use standard atomisers unless it doesn't fit well, again would be interesting if anyone has one?
There are no specs given for the coils other than they are all mesh and the resistant is etched on to the head, even more confusing is the 1.0ohm coils seem to actually read at 1.2ohm and although on the website it only mentions 0.6ohm coil heads i am finding 0.5ohm coil heads for this on some sites!
___________________________________________________________________
Fitting The Pod
Looking inside the bay we can see the Gold plated, spring loaded positive and outer negative contacts. We also see the magnetic ring which will line up with the one on the base of the pod. looking at the pod we have a little tab one side which lines up with a recessed rail to allow movement with stoppers for airflow adjustment. When lowering the pod in the bay just turn and you will feel it drop into place, it fits very securely needing a tug for removal.
___________________________________________________________________
The Airflow
The device has a narrow slot towards the top either side which lines up with slots on the pod when inserted. Due to the retainer ring the airflow is enclosed which is much better than on similar pod mod designs and having the side of the pod adjusting directly to the outer slot you don't get the air leakage as you do on fancy designs such as the Voopoo Drag X etc! As mentioned the pod has a tab that moves along a recessed section so turning as far as it will go one way is fully open and as far as it will go the other fully closed but you can see the pods slots through the outer slots so adjusting precisely is no problem, excellent adjustable airflow design!!!!!!!!
___________________________________________________________________
Review Continued Below:
https://www.healthcabin.net/asvape-hita-...25552.html
Introduction
Asvape were founded in 2016 and have never in their 4 years of manufacturing flooded the market with countless products but tend to focus more on quality at an affordable price and have released a few gems in their portfolio. The idea behind the Hita Ink is combining three previous Asvape devices, the Hita Pod mod with the form factor of the Strider and the illustration style of the Michael. The Hita Ink makes use of the previous Hita pod and coil heads including the RBA while introducing the new 0.3ohm coil head. The power only simple device has fully adjustable airflow, a type C USB and comes with a choice of illustrated finishes with either a Silver or Black frame, let's check it out!!!!
___________________________________________________________________
In The Box
Contents:
Asvape Hita Ink mod
Pod
0.3ohm Mesh coil
1.0ohm Mesh coil
2x Drip tip (MTL & RDL)
Type C USB Cable
Warranty Card
Social Media Card
User manual
___________________________________________________________________
Aesthetics and Ergonomics
The Hita Ink comes in a presentation box with everything neatly placed in their own compartments. The device is a mini pod mod which just gets swallowed up by the hand having a cylindrical spine and classic C-frame form factor, very ergonomic!!!! There is a plain Black option for those not into their illustrations but i am fine with these as they are not exactly Mickey Mouse or Scooby Doo but based on Chinese Mythology so are cultural! I received the Tao Wu design with a Silver frame, the design options are Quiong Qi, Tao Tie, Tao Wu or Hun Dun and come in a choice of Black or Silver frame.
The device at 100g is a nice weight and the design is raised and has a slightly rubberised feel to it. I am not exactly sure what the coating is but these raised designs and coating are also what we have seen on the Asvape Micheal, VSticking VK530 and Pioneer 4You iPV V-IT, so if anyone knows exactly how these raised coatings are done and what the tactile coating is i am sure people would love to know!
On the face we have a Black domed fire button then further down two side by side smaller domed navigational buttons. Between the fire and navigational buttons we have a large display and then right at the bottom a Type C USB port. On the base we have printed safety stamps and branding then moving up top we have the polished amber pod protruding, on the device each side towards the top we have a small airflow slot.
The device is extremely well made and i must admit when i first opened the box i immediately said to myself "this is nice"!
___________________________________________________________________
Hita Ink Specs and Features:
Material: Zinc Alloy Frame
Dimensions: 91*34*28 (Including pod and a supplied drip tip)
Weight: 100g
Battery: 1500mah built-in battery
Capacity: 3ml (TPD Version 2ml)
Output: 5-40W
Resistance coils supplied: 0.3ohm/1.0ohm
Input voltage: 3.3-4.2V
Resistance range: 0.2-3.0ohm
Charging voltage: 5V
Charging current: 1A
Standby current: 0uA
Colour/Design: All Black, Black frame with Quiong Qi, Tao Tie, Tao Wu or Hun Dun mythological design. Silver frame with Quiong Qi, Tao Tie, Tao Wu or Hun Dun mythological design
___________________________________________________________________
The Pod
The pod is cylindrical and up top we have a raised 510 fitting with pre-installed 510 tip which is more frosted than the polished pod and has an inner bore suited for a RDL vape. In the bag of goodies you also receive a more polished tip with very narrow MTL bore but you can also fit your own 510 if you prefer although due to the raised fitting some might look a bit funky although i found the Expromizer drip tip looks and works great with it. On the pictures you can also see how the coil head is also the chimney and just how close it is to your mouth so the vaper has very little distance to travel.
The pod is very transparent and most protrudes outside the device so your e-liquid level can be seen at all times. To one side we have a Black Silicone plug with an arrow showing where to lift and once lifted a generous fill port is revealed, you need the pod on it's side but it can be filled quickly and mess free!
Moving to the base with the 0.3ohm coil head pre-installed we can see the central positive and negative ring and then an outer magnetic ring which is fixed to the retaining base ring which is removable.
___________________________________________________________________
Fitting The Coil Head
The pod has a retainer ring on the base which attaches to the pod with a bayonet fitting, this ring both contains the airflow and makes the pod much more leak resistant than similar designs. The new 0.3ohm coil head comes as one but with the 1.0ohm coil head the lower base section unscrews so don't throw this bottom section as this is needed when getting more of the 1.0ohm coil heads, this bottom section is also included if buying a spare empty pod! The pod assembly just gets press fitted into the pod and then the retainer ring needs a quarter of a turn to secure in place.
As well as the included 1.0ohm coil head and 0.3ohm coil head there is also a 0.6ohm coil head and an RBA. I don't have the RBA but it seems to come with an adaptor to build and pulse your coils using the Hita Ink and looks just like any other 510 pod mod adaptor so i assume using this you could also use standard atomisers unless it doesn't fit well, again would be interesting if anyone has one?
There are no specs given for the coils other than they are all mesh and the resistant is etched on to the head, even more confusing is the 1.0ohm coils seem to actually read at 1.2ohm and although on the website it only mentions 0.6ohm coil heads i am finding 0.5ohm coil heads for this on some sites!
___________________________________________________________________
Fitting The Pod
Looking inside the bay we can see the Gold plated, spring loaded positive and outer negative contacts. We also see the magnetic ring which will line up with the one on the base of the pod. looking at the pod we have a little tab one side which lines up with a recessed rail to allow movement with stoppers for airflow adjustment. When lowering the pod in the bay just turn and you will feel it drop into place, it fits very securely needing a tug for removal.
___________________________________________________________________
The Airflow
The device has a narrow slot towards the top either side which lines up with slots on the pod when inserted. Due to the retainer ring the airflow is enclosed which is much better than on similar pod mod designs and having the side of the pod adjusting directly to the outer slot you don't get the air leakage as you do on fancy designs such as the Voopoo Drag X etc! As mentioned the pod has a tab that moves along a recessed section so turning as far as it will go one way is fully open and as far as it will go the other fully closed but you can see the pods slots through the outer slots so adjusting precisely is no problem, excellent adjustable airflow design!!!!!!!!
___________________________________________________________________
Review Continued Below: