Become a Patron!
Atmomixani Mechanical Mod
- Thread starter dave61
- Start date
need to fix your video either use the media film icon on the top menu or code it manually broken
I have the copper Nemesis by Atmomixani and have been using it for about three months.
I really like this mod a lot.
The button can be a little chunky sometimes and I want to upgrade to a magnet switch eventually although I don't believe the magnets will help the chunky switch thing.
I'm still looking for that perfect copper RDA to put on top of it. Hopefully I will find one soon.
Good mod though imho.
Actually you would be surprised how much they help.
I thought the same thing when i first got my brass nemi and when I installed the magnets the change was night and day compared to before.
I would suggest that you order a few sets just keep in case of drops because the magnets can be a little brittle at times.
That would be awesome! I'm really hoping I get the same results from the magnets that you did.
Thanks for the encouragement.
No problem buddy, just trying to do my part.
And when you do get magnets try throwing three in there compared to just two magnets to see how you like the throw.
i bought mine on ebay for 5 bucks i think.
And the set came with 3 magnets. Ill see if i can find a direct link so you wont be searching all threw out the bay for them
And the set came with 3 magnets. Ill see if i can find a direct link so you wont be searching all threw out the bay for them
@Pancho_Brown Muchos gracias hermano Pancho_Brown.
That's good prices especially for three magnets. Most places are charging as much if not more for only two magnets.
FastTech got a package of 10 for dirt cheap but it takes at least a month to get em and no telling how many of em may be broken when they finally arrive.
Thanks again Pancho, I'm gonna jump on these.
Respeto!
That's good prices especially for three magnets. Most places are charging as much if not more for only two magnets.
FastTech got a package of 10 for dirt cheap but it takes at least a month to get em and no telling how many of em may be broken when they finally arrive.
Thanks again Pancho, I'm gonna jump on these.
Respeto!
Not a problem buddy.
When I first ordered these they accidentally only sent me on set when i ordered two and it came in broken.
I contacted the seller and they responded to me a few hours later saying they were going to replace the broken set and over night it to me for the inconvenience. Awesome customer service if you ask me. Ideally i should have received my whole order in perfect condition the first time but I understand things happen some times.
When I first ordered these they accidentally only sent me on set when i ordered two and it came in broken.
I contacted the seller and they responded to me a few hours later saying they were going to replace the broken set and over night it to me for the inconvenience. Awesome customer service if you ask me. Ideally i should have received my whole order in perfect condition the first time but I understand things happen some times.
That's good to know that they did the right thing. I've always been leery to but vape stuff from ebay. I've only purchased kanthal from there. But I've been dreaming about the magnet upgrade since the day I bought my Nemesis back in May.
Fuck yeah I'm stoked, gonna go buy em right now!
Fuck yeah I'm stoked, gonna go buy em right now!
Nice! I'm glad that I was of some assistance. Oh and if your nemesis has that clear coat on it the magnets might be pretty snug on the switch. Don't be afraid to sand it down a little. It what i had to do with a gold plated nemesis my friend had.
Mine has no clear coat. Just copper. But I'm glad you brought that up because I want to be sure that the magnets I get will actually fit my Nemesis.
I'm sure they will be fine though.
I'll hopefully find out by Monday cause that's when they are estimated to arrive! Woohooo!!!
I'm sure they will be fine though.
I'll hopefully find out by Monday cause that's when they are estimated to arrive! Woohooo!!!
Lefty
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
These worked great for me. 75 cents a piece. http://www.supermagnetman.net/product_info.php?products_id=2813
These are N50 and quite strong magnetically so only two are needed to prevent firing when standing.
Extras would still be a good idea for when you drop it and it lands on the switch as I did.
These are N50 and quite strong magnetically so only two are needed to prevent firing when standing.
Extras would still be a good idea for when you drop it and it lands on the switch as I did.
Last edited:
Love my nemmy had it for 6 months. No complaints i prefer mine without the switch magnets. Very durable and reliable no major problems at all greay starter mech mod simple and straight forward
Scuba-Matt
Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Loved my Atmomixani Nemesis until it fell off the coffee table and snapped the threads off the firing button end. It was a good mod and not its fault it broke.
Atomomixani never made a copper nemesis. It's a clone. And the clone is just plated. Ask me how I know...???!!!
I tried to force patina it with a torch to only have it flake off
Yeah I hate to say it but you're right.
I got to looking and I did in fact get a clone and NO it is not true copper.
I Just put the magnets in the switch and right away I noticed the magnets sticking to the mod itself.
And to top off my displeasure the magnets are not as strong as I was thinking they would be.
It said I could have a Kayfun on top and it repel strong enough to keep it from firing. Well it has a Trident RDA on it and if I set it down it will fire the Atty. The spring was strong enough to keep that from happening.
Well motherfuckerdude!!! Not as happy as I once was. But still love My Neme even if it's a clone that I paid too much for.
It's my first mech and it will always be special.
On the bright side the magnets do make the throw smoother on the switch
There's always a silver lining just have to know how to see it
Well shit...I'm sorry you got shitty magnets. I can tell you mine worked great and that's the only reason I recommended the ebay store..Yeah I hate to say it but you're right.
I got to looking and I did in fact get a clone and NO it is not true copper.
I Just put the magnets in the switch and right away I noticed the magnets sticking to the mod itself.
And to top off my displeasure the magnets are not as strong as I was thinking they would be.
It said I could have a Kayfun on top and it repel strong enough to keep it from firing. Well it has a Trident RDA on it and if I set it down it will fire the Atty. The spring was strong enough to keep that from happening.
Well motherfuckerdude!!! Not as happy as I once was. But still love My Neme even if it's a clone that I paid too much for.
It's my first mech and it will always be special.
On the bright side the magnets do make the throw smoother on the switch
No i feel like a douche for sending you that way.
Hey brother no worries!
I got to fiddling around with the magnets and now they are working just fine. I'm happy to have them and in no way do I feel like they are shitty.
I just needed to put one magnet on bottom and the two on top and it works real strong now. I can stand it up and it won't fire. Although I haven't tried that with a Kafun on top yet. lol
I'm still very grateful for your assistance
