Authentic Mutation X V4 Rda

[Stigma]

I purchased this from Vape Society Supply about 3 months ago and honestly can't stand it. I used it for less than a day and it's been sitting in its box ever since. I'd rather someone else enjoy it than just sitting here. It's 100% authentic and in its original box. I've been looking through these PIF posts and I'm hoping to give this to someone who's in need and not someone who takes advantage of people's generosity.

 

[midknight420]

Well Stigma. First off, welcome to VU bud. It is an awesome place. I won't say that I'm needy. Surviving , but not needy........yet. But, I have always wanted a mutation and just haven't been able to afford to get another rda. Last one I got was a Succubus clone I found on clearance at a local B&M lol. I've heard good and bad about these Mutations. This is an awesome pif man. I hope you'll consider me. I hope you'll enjoy VU as much as I do.

I'm not crazy, my mother had me tested.

 

[Stigma]

Well Stigma. First off, welcome to VU bud. It is an awesome place. I won't say that I'm needy. Surviving , but not needy........yet. But, I have always wanted a mutation and just haven't been able to afford to get another rda. Last one I got was a Succubus clone I found on clearance at a local B&M lol. I've heard good and bad about these Mutations. This is an awesome pif man. I hope you'll consider me. I hope you'll enjoy VU as much as I do.

I'm not crazy, my mother had me tested.

It's all yours. PM me your address and I'll get it out to you tomorrow morning. I hope you like it. I was really disappointed with it but most people seem to like it.

 

[midknight420]

It's all yours. PM me your address and I'll get it out to you tomorrow morning. I hope you like it. I was really disappointed with it but most people seem to like it.

Wow, thanks alot. I'll get a build on this and let you know what I think about it when I get it.

My info is:
PM this info to the member please!!



I'm not crazy, my mother had me tested.

 

[midknight420]

Grrr. I was in a pm window. Stupid Tapatalk glitched lol

I'm not crazy, my mother had me tested.

 

[Stigma]

No problem. I'll let you know when it's in the mail. I'm planning on tomorrow or latest Saturday morning.

 

[midknight420]

Awesome. Will be looking forward to it. Excited to get a build on this thing

I'm not crazy, my mother had me tested.

 

[skt239]

I have a few of these, both the mini and full size, and love them. It's simple to build on, has a decent sized juice well and very versitle air flow. This is the RDA that got me to switch over from tanks. @Stigma, this was very cool of you.

 

[CHIEFTANG]

Damn /: I was just looking to get one of these

 

[Stigma]

Damn /: I was just looking to get one of these

I think it's horrible but I'm kinda picky

 

[midknight420]

I really wanted one, but my B&M only had the xs

I'm not crazy, my mother had me tested.

 

[CHIEFTANG]

I think it's horrible but I'm kinda picky

I honestly just need one more rda, I gave someone locally one of my older ones to find out now I don't have an rda that I can build on for my girl friend

 

[Stigma]

My favorite RDA is the Royal Hunter. I have 2.

 

[CHIEFTANG]

My favorite RDA is the Royal Hunter. I have 2.

I have one also, it's currently on my minivolt

 

[sychosis]

I have a few of these, both the mini and full size, and love them. It's simple to build on, has a decent sized juice well and very versitle air flow. This is the RDA that got me to switch over from tanks. @Stigma, this was very cool of you.

I have the old and the new version , love both of them . How is the mini ? Been debating getting one of those

Sent from my SAMSUNG-SM-G870A using Tapatalk

 

[skt239]

I have the old and the new version , love both of them . How is the mini ? Been debating getting one of those

Sent from my SAMSUNG-SM-G870A using Tapatalk

The mini is great. I have the Project Sub Ohm version and have the standard version on the way. Only problem is the o-rings are a bit loose. From what I've read, that is improved by replacing the installed ones with the ones in the box. As far as performance goes, I like the way it vapes better than the full sized.

 

[renzyb]

My favorite RDA is the Royal Hunter. I have 2.

I've been wanting to get one of those. I'm with you on the v4. I gave it to a cousin of mine who needed an rda. Now to save for the Royal hunter.

 

[Stigma]

I've been wanting to get one of those. I'm with you on the v4. I gave it to a cousin of mine who needed an rda. Now to save for the Royal hunter.

I don't even look at new RDAs I like it so much.

 

[skt239]

I have a royal Hunter that came with a build in it that I used for about a week and really liked. Unfortunately, when I went to change out the coils I found the screws were completely stripped out by the previous owner. Now it just sits on a shelf. I'd love to use it but there is no way those stripped screws are coming out.

 

[CHIEFTANG]

I have a royal Hunter that came with a build in it that I used for about a week and really liked. Unfortunately, when I went to change out the coils I found the screws were completely stripped out by the previous owner. Now it just sits on a shelf. I'd love to use it but there is no way those stripped screws are coming out.

I'd take it off your hands for you

 

[CHIEFTANG]

I have a royal Hunter that came with a build in it that I used for about a week and really liked. Unfortunately, when I went to change out the coils I found the screws were completely stripped out by the previous owner. Now it just sits on a shelf. I'd love to use it but there is no way those stripped screws are coming out.

Although it not be too hard for you to get replacement screws

 

[Stigma]

I have a royal Hunter that came with a build in it that I used for about a week and really liked. Unfortunately, when I went to change out the coils I found the screws were completely stripped out by the previous owner. Now it just sits on a shelf. I'd love to use it but there is no way those stripped screws are coming out.

You can order new ones. The ones that came with my first one were garbage. There's a place near me called bolt depot I ordered them from. The size is :
2.5mm x .45mm x 4mm
Allen cup point set screws

 

[Stigma]

You can get the stripped ones out

 

[Stigma]

 

[skt239]

Thanks @Stigma !

How can I get them out?

 

[Stigma]

I had to use a pair of needle nose on mine. You could also try to get a better quality allin. It seems like the one they give you is a touch too small and I think that's why the screws strip so easily. A better quality allin will hopefully fit a little tighter. If that didn't work for me I'd have to get creative on the spot. I definitely think you can get them out. Since they're already ruined see if you can get a tiny flat head screwdriver to loosen them.

 

[skt239]

I had to use a pair of needle nose on mine. You could also try to get a better quality allin. It seems like the one they give you is a touch too small and I think that's why the screws strip so easily. A better quality allin will hopefully fit a little tighter. If that didn't work for me I'd have to get creative on the spot. I definitely think you can get them out. Since they're already ruined see if you can get a tiny flat head screwdriver to loosen them.

I'll try that out tonight. Thanks again.

@CHIEFTANG - If I can't fix it I'll send it to you.

 

[martnargh]

Very cool, i rather enjoyed the mxv4... just pulled it back out from the rda graveyard a few days ago too and she vapes just as good as she did when i got her.
Just remember not to stuff the well with cotton or she will leak.

Sent from my SM-N920T using Tapatalk

 

[midknight420]

Very cool, i rather enjoyed the mxv4... just pulled it back out from the rda graveyard a few days ago too and she vapes just as good as she did when i got her.
Just remember not to stuff the well with cotton or she will leak.

Sent from my SM-N920T using Tapatalk

Thank you. I would have done it too with the new wicking method I started using.

I'm not crazy, my mother had me tested.

 

[skt239]

My mutation mini is more forgiving when it comes to over dripping or shoddy wicking than my full sized.

 

[Stigma]

Thank you. I would have done it too with the new wicking method I started using.

I'm not crazy, my mother had me tested.

Sorry for the delay I'm gonna have it in the mail first thing in the morning.

 

[midknight420]

It's no problem

I'm not crazy, my mother had me tested.

 

[mcrazzle54]

I actually have 2 mutation v4 and for the most part I like them. I mainly use them for tasting new juices. But since my builds have got much bigger and my ohms lower I found that it could t really handle what I was wanting to do so my wife uses one and the other one is for parts like o rings and bottom air flow plugs which like to disappear when ever I change out her coils. Now I switch between my velocity and my phenotype L. Just make sure you keep an eye on the juice leaking for the bottom air flow. You might have to push the plugs in farther or twist your barrel airflow alittle off center. But good luck hope u like it.

 

[martnargh]

When i place the cotton in the well i push it up against the outer walls of the well to leave space toward the center of the well for juice... took me a few months to realize this as befote id stuff the well and she would leak and id just live with it. Whole lot better of an experience since she stopped leaking. Great freakin rda.

Sent from my SM-N920T using Tapatalk

 

[Stigma]

I actually have 2 mutation v4 and for the most part I like them. I mainly use them for tasting new juices. But since my builds have got much bigger and my ohms lower I found that it could t really handle what I was wanting to do so my wife uses one and the other one is for parts like o rings and bottom air flow plugs which like to disappear when ever I change out her coils. Now I switch between my velocity and my phenotype L. Just make sure you keep an eye on the juice leaking for the bottom air flow. You might have to push the plugs in farther or twist your barrel airflow alittle off center. But good luck hope u like it.

The leaky bottom airflow is what really makes me hate this thing. When not plugged it leaks everywhere and there's way too much airflow. The plugs are a joke that only slow the flow of juice all over your mod including into the 510 connector. I know people have figured out how to stop it from leaking but it's just something I couldn't be bothered with. More trouble than it's worth imo.

 

[mcrazzle54]

If the bottom air flow was to be cut like the gear rda where the juice well is cut around the bottom air flow it would have had less leaking issues.
But it's a good rda I'm not knocking it. I'm sure you'll enjoy it. I would suggest picking up a bag a replacement parts you are going to need them.