Become a Patron!
best two post dripper for tc and non tc?
- Thread starter f1r3b1rd
- Start date
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Did drive by at lunch to the mailbox, already had a build ready to pop in it.
I guess im a professional vapor, was able to install the build at red lights. Lmao!!! This is the exact atty I wad looking for. Dual 24g SS in temp control is kicking ass out of it!!!
I guess im a professional vapor, was able to install the build at red lights. Lmao!!! This is the exact atty I wad looking for. Dual 24g SS in temp control is kicking ass out of it!!!
Excellent man, your love for it will grow even more over time. I love mine so much I waxed it the other night.....yea you heard right I fucking waxed it with some synthetic polymer wax.....lady asked me what I was doing I told her don't worry about it
The dot cap will be an awesome addition!!!
Good times man glad to hear your loving it.
The dot cap will be an awesome addition!!!
Good times man glad to hear your loving it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I got the USPS stalking number this morning from localvape for the dotcap. I'm finally getting the dedicated attys with the dedicated mods. HahahaExcellent man, your love for it will grow. I love mine so much I waxed it the other night.....yea you heard right I fucking waxed it with some synthetic polymer wax.....lady asked me what I was doing I told her don't worry about it
The dot cap will be an awesome addition!!!
Good times man glad to hear your loving it.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
I've toyed with the bf idea, but i'll vape 3 different flavors in a day and that would get tedius. If I stuck with the same flavor all day I would be all about it.
Last edited:
Yea I figured my main all day vape would be bottled but I could still drip here and there, and I carry a vape big with multiple mods so I'm never dedicated to one thing. It actually gets to be a pain sometimes in the morning deciding what I'm gonna roll for the day, mostly the bottom fed is intriguing me lately just deciding my options and so far it's not looking cheap.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
Bahahah no, no they aren't. And at the price of some of the much BFs it almost doesn't make sense unless you really love that particular modder.
I'm sure when the sx350j finds its way into a bf mod, that would make me have a second look
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
If you haven't tried rips Petri build, don't! It sucks
I did try his build and it absolutely sucked, I couldn't get a good vape off of it to save my life,
AND I have bad news, last night I was trying a different build using the screws instead of the post holes and um hmmmmm I'm so aggravated it's hard for me to type......um.... My positive post felt a little loose......so after pulling the delrin plate up I looked at the design and I was like oh sweet my 510 pin is just loose....nope it's stripped. FUCK.
So by staring at it in denial for about an hour it looks like the 510 only grabs about half of the positive post which isn't shit and a serious design issue. After searching the net I'm not the first one with the issue, NOW I'm hoping the v 1.5 has changed, but the build I was doing I did put quite a bit of pressure on the post so hard to say if I didn't do this build of it would have popped it out or not but having a hard time believing that I pulled on it hard enough to put enough pressure on the pin to pull the threads out sideways....so yea, I have sent petri an email inquiring about getting another pin and post so we'll see where that goes.
AND I have bad news, last night I was trying a different build using the screws instead of the post holes and um hmmmmm I'm so aggravated it's hard for me to type......um.... My positive post felt a little loose......so after pulling the delrin plate up I looked at the design and I was like oh sweet my 510 pin is just loose....nope it's stripped. FUCK.
So by staring at it in denial for about an hour it looks like the 510 only grabs about half of the positive post which isn't shit and a serious design issue. After searching the net I'm not the first one with the issue, NOW I'm hoping the v 1.5 has changed, but the build I was doing I did put quite a bit of pressure on the post so hard to say if I didn't do this build of it would have popped it out or not but having a hard time believing that I pulled on it hard enough to put enough pressure on the pin to pull the threads out sideways....so yea, I have sent petri an email inquiring about getting another pin and post so we'll see where that goes.
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
That just sucks!!!! Definitely going to be a little on the gentle side with mine. I bought this with the intention of a basic tc build anyway. Still SUCKS!!!
Let me know what Petri says. As good as the workmanship is im shocked at such a glaring flaw
Let me know what Petri says. As good as the workmanship is im shocked at such a glaring flaw
Wow, just got done messaging dot mod through my ladies facebook which I cant stand but whatever, they are sending me a new deck out asap and I am shipping the old one back, no charge I just need to pay to get it back to them. Since I sent them pics they don't need the old one to send the new one. So looks to be great service if you get past the warranty if any on where you bought it from, this is great news for everybody that they are so nice and prompt for customers
So just waiting for replacement, they also have a site that you can send them messages through I just didn't see it, its www.dotmod.net
So just waiting for replacement, they also have a site that you can send them messages through I just didn't see it, its www.dotmod.net
Stepinrazor
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I have recently bought the Aria Anarchist Phenotype L
Two post design gold plated positive pin with 4 massive cyclops style air holes and a deep juice well. Flavour hits the spot with the air holes mostly closed.
Two post design gold plated positive pin with 4 massive cyclops style air holes and a deep juice well. Flavour hits the spot with the air holes mostly closed.
Dude, so excellent!!!! I'm missing mine already....Ok ok ok....you were right the dotcap makes it perfect
f1r3b1rd
https://cookingwithlegs.com/
Staff member
Senior Moderator
VU Donator
Diamond Contributor
VU Challenge Team
Member For 5 Years
VU Patreon
That's literally my on the go setup!
Hmmm.... 2 Post RDA .... VELOCITY http://www.avidvaper.com/velocity-rda/
i like the looks of that, how long for shipping?
if i remember correctly it was about two weeks. faster than fasttech thats for sure.
This thread is why I bought this clone. Is there a away to close off the other hole and run a single coil?
Ugh I'm gonna cancel this order
i have one on the way!