Become a Patron!
Billet Box Appreciation Thread
- Thread starter forza
- Start date
Billetboxvapor.com
They update stock on Saturday mornings. They might even have one in stock now!
Sent from the Death Star
They update stock on Saturday mornings. They might even have one in stock now!
Sent from the Death Star
Ah, didn't realize they discontinued the BX9. I only knew that about the TMNBB and the Nugget. What a bummer.
Sent from the Death Star
Probably your best bet would be to place a WTB add in the hardware section. Then, there are all the FB groups too.
I have watched couple vids on these BB but man they look like a pain in the ass lol
Once you figure out which coil you wanna use whether it be stock or using an rba. Then Learning to wick said rba with miniscule amounts of cotton. They're actually pretty nice
Last edited:
It all DEEEPends! If you're using one of the rebuiltables, then as @MrMeowgi said, you gotta learn the finer points of wicking and such. If, on the other hand, you're using drop in coils, life is pretty good. I hate to
but the MF bridge is very good (IMHO) with drop in coils.
I been looking at them. But I look at alot of stuff lol just be happy with what I have I tell myself.Get a Dvarw
Sent from my LG-D850 using Tapatalk
not sure if you guys saw this https://www.everzon.com/hotcig-r-aio-80w-kit.html
same mob that made the RSQ squonker. But sorta BB form factor
takes 510 threaded tanks, but recessed like a boro. Hard to explain
same mob that made the RSQ squonker. But sorta BB form factor
takes 510 threaded tanks, but recessed like a boro. Hard to explain
Looks like a nice little kit. It takes Aspire Breeze coils from what I understand.
Sent from the Death Star
I think I read that the attie is changeable with a standard tank. But might run into afc issues
Yeah it comes with an adapter that bridges through the area normally occupied by the tank, and has normal 510 at the top for tanks and RDAs.
I have a Billet and plenty of other mods. Why am I considering one?!
Sent from the Death Star
Because you want to try it and a week later sell it in the classies?
Do you have SS profile loaded? Are you using a SXK BB or an authentic?
I am using sxk and dont have any profiles loaded. Thank you for the response
The good news is that it is a SXK, dare I hope it is the USB version ? That would make it a lot easier to hook up to Escribe.
The bad news is I'm at work so I can't send you a copy. Let's hope another one here can jump in.... @MrMeowgi
Yes I can hook it up to escribe never really messed with the profiles .
Here's the evolv page for the 60. Not sure if you have escribe or not yet. Literally everything you can think to ask will be on this website. And if you have any dna75c or 250c you can download the international version of escribe and get the replay function.
https://www.evolvapor.com/products/dna60
https://www.evolvapor.com/products/dna60
Unfortunately I only have the DNA 40 billet now. But. I'm thinking the off may be a max temp setting. Having max temp off was the only way I could keep mine from showing temp protect in Tc. States everywhere that temp protection warning is just to let you know it was at max temp. The flashing bugged me so I went back to the A-tank on the 60 when I had it
FWIW, I could never get TC to run correctly on my SXK BB. I tried it with my VapeShell RBA and it always showed OFF while firing.
Sent from the Death Star
Hey it's not that it goes into temp proreaction it just says off where the temperature would be and then it just fires in wattage mode. So weird I do have escribe and updated software but that all I really done.
Mine did the same thing and it usually means there isn't a solid connection somewhere causing your resistance to fluctuate.
By nature, the connections on a BB can be less than solid unfortunately.
Sent from the Death Star
Were you vaping or roasting a pig there?
Were you vaping or roasting a pig there?
Never took long of a puff. It just turns max temp off. But I see what you mean. Lol
Mine did that when I first got it. I loaded the 316L TCR curve from escribe and deleted the one that was already loaded. I haven’t had any problems with it since. It will hit temp protect more since the vapeshell is such a small rba.
Carpe Nidor
Dude, piggies gotta be low and slow my friend!Were you vaping or roasting a pig there?
600 would kill it deader than it already is to begin with! Sent from the Death Star
Don't you know it! That's why I love my Pit Barrel Cooker!Dude, piggies gotta be low and slow my friend!600 would kill it deader than it already is to begin with!
Sent from the Death Star
I've always wanted to do one Hawaiian style. Dig a pit on the beach, fill it with coils, wrap that bitch up in some leaves, and bury for 10 hours whilst I drink myself silly!
Sent from the Death Star
Well, of all that I drank myself silly.....more than once!
So I need some dvarw advice, want to try one of the mtl clones ,either from 3fvape or fasttech . Any recommendations?
I bought the kit with all three tanks, it was $14.99 or so.
I bought the three tank kit also. It’s performing well. I got it from 3f.
Carpe Nidor
Now all you need is the top fill tank. It sucks they are only 2 ml, but filling is easy enough . Just make sure you don't crossthread the top cap after a fill. I usually turn it counter clockwise until it drops in place then clockwise to tighten.
I’ve got one on my list but I really don’t mind the bottom fill with the regular tanks so far. It’s the easiest bottom fill tank I have plus it lets me keep an eye on my cotton and coil.
Carpe Nidor
That is true enough for the clones but the authentics are a PITA, I really don't know why is so difficult to remove the top on them. Life is much better since I got the top fill tanks for them.
For six bucks a piece I’ll probably get a couple to have on hand. I’m also considering the dvarw 16 to go on top of my solo basic. I’m running my little boomstick dripper on it right now.
Carpe Nidor
Is that a 16 mm mod?For six bucks a piece I’ll probably get a couple to have on hand. I’m also considering the dvarw 16 to go on top of my solo basic. I’m running my little boomstick dripper on it right now.
Carpe Nidor
Which mod? Where did you get it?For six bucks a piece I’ll probably get a couple to have on hand. I’m also considering the dvarw 16 to go on top of my solo basic. I’m running my little boomstick dripper on it right now.
Carpe Nidor
The mod is a vaptio solo basic 2. I bought from vaptio’s website. I think they are only $10.It came with some crappy little tank that went straight in the trash. It’s actually 19mm. Three firing modes 15w, 20w and 25w. It’s actually a pretty decent mod.
Carpe Nidor
Last edited:
If/when you get the top fill tank for Dvarw, make sure the cotton doesn’t protrude from the juice inlets. Tolerances are pretty tight and the tiniest bit of cotton can jam the thing to the point where you're unable to close/open the juice flow.For six bucks a piece I’ll probably get a couple to have on hand. I’m also considering the dvarw 16 to go on top of my solo basic. I’m running my little boomstick dripper on it right now.
Carpe Nidor
G10 doors on the BB and a new board in the 18350 tube, life is good. 
Those doors look great.
Carpe Nidor