Thanks Bear. I keep thinking about the amount of Picos and clowns I could stash away for the same $$$ but dammit....
Since everyone is cool and it's getting late on the east coast. I'll holler out tomorrow.
Become a Patron!
Billet Box Appreciation Thread
- Thread starter forza
- Start date
Since everyone is cool and it's getting late on the east coast. I'll holler out tomorrow.
Did Troy ever get back to you on the online list not moving? I asked the same question about a month ago. He said it would when he starts on it. At the time he said that was a second list started after problems with the first one but he was almost done with the first. I've been on it along time...
Has anyone tried the multi hole inserts? Guessing the number on the right is total air but the math is lost on me....I've also worked 55 hrs in 5 days with 1 more to go.
View attachment 144430
To me I think those are for the people that are borderline between the other ones.
For instance, I like the 1.5s but wish it was a skosh looser sometimes, so the 2*1.2mm for 1.69mm would be my pick.
Or someone that is using the 1mm normal, but wants it not as tight as the .08mm would get the 2*.06mm
As for how they perform...no idea.
Which reminds me... if you end up getting the MTL, I might add in two for me (my dime of course LOL)
I know right. Just don't look at the back lolWhy do they insist on that stupid engraving?
Sent from the Death Star
Sent from my SM-G950U using Tapatalk
Since the BB truly sucks at TC... it ends up being which one is cheaper for you?
They will both supply power... just with the DNA you can do all the things a DNA allows through Escribe, Minus TC
I've heard that the 70w board has some potential reliability issues, but I didn't experience that with with the couple I had.
Sent from the Death Star
I am reading conflicting and conditional reports on the BB DNA 60 and TC. One years long vet with a dozen BBs told me it works fine, but not with drop in coils, even if they're tc compatible.Since the BB truly sucks at TC... it ends up being which one is cheaper for you?
They will both supply power... just with the DNA you can do all the things a DNA allows through Escribe, Minus TC
Last edited:
hold your horses there cowboy. this is just a thought. and really, I don't need it
@~Don~ gonna pass on to @BrewBear
I need to spend some more time with the clown and catch the next list with a better idea of want I actually want for a tank and air inserts.
I've only used the 3.5 tank and want to give the 2 and 5 a try with some different builds, etc.
Thanks so much for offering the spot!
Have at it Bear
I need to spend some more time with the clown and catch the next list with a better idea of want I actually want for a tank and air inserts.
I've only used the 3.5 tank and want to give the 2 and 5 a try with some different builds, etc.
Thanks so much for offering the spot!
Have at it Bear
@~Don~ gonna pass on to @BrewBear
I need to spend some more time with the clown and catch the next list with a better idea of want I actually want for a tank and air inserts.
I've only used the 3.5 tank and want to give the 2 and 5 a try with some different builds, etc.
Thanks so much for offering the spot!
Have at it Bear
All good, I can also get the Tripod since I joined that list and got in
join lists for those that want an extra chance @BrewBear whenever you want to get the Dvarw or a Tripod hit me up...can be anytime in the next 13 days or so, then I fall off the list
Sent from my iPhone using Tapatalk
I got in on the Tripod list too. I really like mine. It beats the Dvarw in flavor but I still love the Dvarw for its simplicity. Lots of moving pieces on the Tripod... Only drawback for me anywayAll good, I can also get the Tripod since I joined that list and got injoin lists for those that want an extra chance
@BrewBear whenever you want to get the Dvarw or a Tripod hit me up...can be anytime in the next 13 days or so, then I fall off the list
Sent from my iPhone using Tapatalk
Sent from the Death Star
Only things that bothered me is the inconsistency of their compression lock of the tank and the whole have to buy the 3.5 tank...poor Trevor’s was a wobbler
Sent from my iPhone using Tapatalk
Yeah man he really got bent out of shape over that! I totally get where he's coming from. Mine does it but only slightly.Only things that bothered me is the inconsistency of their compression lock of the tank and the whole have to buy the 3.5 tank...poor Trevor’s was a wobbler
Sent from my iPhone using Tapatalk
As for the 3.5ml tank, you still have to buy that with the Dvarw... I guess the only diff is that the Dvarw doesn't come standard with the 2ml.
Sent from the Death Star
Dvarw's used to be sold in 2, 3.5, 5ml kits... and decks alone. (same as now)
Another hard pill to swallow, paying for a tank I wouldn't use
Its like my Yo-Yo'n on buying a GT4 or GTR...(leaning towards GTR with the secondary post) Do I really want to spend an additional $32 on the RDL post? I know it will be to my liking with the RDL post...but (below)
Old adage: "It's 100% right, or it's 100% wrong"
Is there a nut up on the top where the drip tip fits in the BB? If yes, loosen it up, that should release the pressure/seal on the boro tank. If the nut is out aready but the boro tank doesn't come out, it is because some condensation formed between the boro and the BB wall. Do the best you can to dislodge it from there. Usually we put a small piece of tissue behind the tank (about the size of the tank) and that doesn't allow for the capillary action to create that tight seal between the boro and the BB wall. To build it, yes, you have to take the bridge out, to fill it, all you do is slide down the glass face on the boro.Ok, i need help. I should be able to to get this out to build and fill it right?
Sent from my SM-G920R4 using Tapatalk
Last edited:
Very first thing that happened to me too.Ok, i need help. I should be able to to get this out to build and fill it right?
"How do ya get this freakin thing outta here"
Dear Santa (@~Don~ ),
All I want is the MTL deck and the round hole chimney for the MTL tank. I have a bucket full of spares......
I’ll look at that once UFC241 is over
For you all that want to watch it
https://sportsurge.net/mma/
Make sure to have a pop up blocker
Sent from my iPhone using Tapatalk
No rush, I'm still runnin' on fumes!I’ll look at that once UFC241 is over
For you all that want to watch it
https://sportsurge.net/mma/
Make sure to have a pop up blocker
Sent from my iPhone using Tapatalk
I don't see a nut. I lightly pulled on it with a flathead, but I don't want to crack it...
Sent from my SM-G920R4 using Tapatalk
That's the one! It is threaded, it unscrews!I don't see a nut. I lightly pulled on it with a flathead, but I don't want to crack it...
Sent from my SM-G920R4 using Tapatalk
You slide the glass down to open it up. Then the parts usually push out through the bottom and top. Or pull out through the top, then the bottom comes out on this one.Ok, got this far... 510 unscrews to release "tank". What now?
The glass face slides down. Make sure you know which way it is oriented, the glass has a slight bevel on one side (authentic boros)
Is it just me or does that glass look funky on top?
Slow boat be fine, it's not like I don't already have one....or three@BrewBear
View attachment 144484
these 2 right?
Then DHL or Slow Boat?
View attachment 144485
Looks to come to about $120 from my simple math (including the $7.90 to you)
Again, I have up to 13 days I think still before I fall off being able to buy it... lemme check when the list was to make sure....
View attachment 144486
Ok so have 10 days left
Slow boat be fine, it's not like I don't already have one....or three
Well shit, they're out of stock of the round hole juice flow rings
Deck alone slow boat is $93 +- $1 for exchange rate paypal anal probing shipped to you
$72.07+$13.31+$7.90(USPS)+$93.38
No worries, the deck alone will be fine. Thanks @~Don~, let's say $95 all together?
Sounds about right... just tell me when you want to make the purchase...even if bought today, probably be a bit before it gets shipped as per the above post from Peter.
Sent from my iPhone using Tapatalk
vapeshell ordered 
What I see in the pics is condensation, not leaking, but I could be wrong. We use a dry plug most of the time, a small contraption that fits in the bottom of the boro tank. @troydestroy should be able to help with that, he sells them.Well, I'm falling in lovevapeshell ordered
I am getting a tiny bit of leakage. Not enough to be a problem by any means, but wondered if there was a trick, or something I did wrong?
Sent from my SM-G920R4 using Tapatalk
Yes, it does seem more like condensation than leaking, thanks!
Sent from my SM-G920R4 using Tapatalk
Nice Christmas present to myselfUp to 60 days before it ships then up to 20 from there
Sent from my iPhone using Tapatalk
PM sent
Nice Christmas present to myself
Only down fall about slow boat... doesn't track once in the States... have to call USPS a few days after we see it leave Budapest... did that with my first one... was able to know an approximate day it would arrive by calling... although the system doesn't update... on USPS' side they know where it was last scanned.
I don't do that, it gets here when it gets here.....if it gets here
Now, I need more coffee
I don't do that, it gets here when it gets here.....if it gets here
Well I will be doing that lol... want to make sure I am home the day its supposed to be here since I have to sign for it
CV's post office is a wreck when it comes to getting missed deliveries.