Vape Fan
_evil twin_
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Press Corps
Member For 5 Years
I've been looking at drippers for dripping and ran across this.
The design looks like it would work really well as a squonker, don't know about dripper.
No reviews, or even pics found that show the af configuration on the inside of the cap, or if the DT has orings on it. Why do they keep doing that? lol It's designed, manufactured, and for sale....and I don't see much about it at all. Pics from the product page at e-tailers and that's it.
https://www.asmodus.com/products/asmodus-blank-rda
The deck is 22mm and with the cap it's 24mm x (and I found out by calling them that it's) 20mm w/o tip. 2 mm taller than C4 LP and the stock tip is taller.
Silver plated standard and BF pins.
O-ring is on the tip for this one as well
It uses Peak for the AFC ring.
I was able to get some photos from asMODus. From those we can see some things.
Inside the bottom of the cap has a lip [that rests on the lip of the deck], and then cap extends down to the mod so that none of the deck shows. Locking/notched barrel keeps the cap within the adjustment range of the AF and to unscrew the RDA from the mod, you'd close[or is it open?] the AF all the way, then it will unscrew.
Next you can see the Peak AFC ring installed and removed as well as AF configuration.
It has an O-ring on it to keep it in place inside the cap, and has 2 holes that line up with the tear drop nub we can see on top of each post to keep the air ports lined up.
The 6 tabs line up with the 6 AF holes on the cap. So adjusting one adjusts them all.
Seems to me like the AF would be quiet considering less air would need to travel in each one of the 6, instead of 2 - or 4.
Can also see in a couple of these pics that it DOES have a lip where you tighten the coil leads to help hold them in place.
I think they did better with aesthetics, as compared to C4. Other than knurling that serves no purpose, it has the logo on each side.
The design looks like it would work really well as a squonker, don't know about dripper.
No reviews, or even pics found that show the af configuration on the inside of the cap, or if the DT has orings on it. Why do they keep doing that? lol It's designed, manufactured, and for sale....and I don't see much about it at all. Pics from the product page at e-tailers and that's it.
https://www.asmodus.com/products/asmodus-blank-rda
The deck is 22mm and with the cap it's 24mm x (and I found out by calling them that it's) 20mm w/o tip. 2 mm taller than C4 LP and the stock tip is taller.
Silver plated standard and BF pins.
O-ring is on the tip for this one as well
It uses Peak for the AFC ring.
I was able to get some photos from asMODus. From those we can see some things.
Inside the bottom of the cap has a lip [that rests on the lip of the deck], and then cap extends down to the mod so that none of the deck shows. Locking/notched barrel keeps the cap within the adjustment range of the AF and to unscrew the RDA from the mod, you'd close[or is it open?] the AF all the way, then it will unscrew.
Next you can see the Peak AFC ring installed and removed as well as AF configuration.
It has an O-ring on it to keep it in place inside the cap, and has 2 holes that line up with the tear drop nub we can see on top of each post to keep the air ports lined up.
The 6 tabs line up with the 6 AF holes on the cap. So adjusting one adjusts them all.
Seems to me like the AF would be quiet considering less air would need to travel in each one of the 6, instead of 2 - or 4.
Can also see in a couple of these pics that it DOES have a lip where you tighten the coil leads to help hold them in place.
I think they did better with aesthetics, as compared to C4. Other than knurling that serves no purpose, it has the logo on each side.
Last edited: