Can't read atomizer

[BKTOAD]

Have been having trouble with my topbox mini. It has trouble finding the atty on my moonshot. It has worked together, but today it just will not find the resistance and lock on (flashes 9.99). Works fine with toptank and tfv4 mini (issues in the past, and sometimes needs to be re-attached to find the tfv4 tho).

First few times I used the moonshot, no problems. and no problems earlier today. But switched tanks, and now no luck. Cleaned the connection, nothing.

Moonshot works fine on istick 60.

 

[kross8]

check the pin on the moonshot or the pin 'receiver' on the topbox.. they could be a micro hair off from making contact. always clean all connections.

 

[f1r3b1rd]

check the posthole connections and make sure they are tight, also make sure the coils are not hitting any of the atomizer causing them to short. check the 510 pi on the atomizer and make sure its tight. also GENTLY nudge the 510 of the mod with a screwdriver.

 

[BKTOAD]

check the pin on the moonshot or the pin 'receiver' on the topbox.. they could be a micro hair off from making contact. always clean all connections.

I think you are right in that they are possibly just barely not making good contact. But I cannot see anything I can adjust to make it right. Atty has a shorter screw connection and no adjustable pin.

 

[BKTOAD]

check the posthole connections and make sure they are tight, also make sure the coils are not hitting any of the atomizer causing them to short. check the 510 pi on the atomizer and make sure its tight. also GENTLY nudge the 510 of the mod with a screwdriver.

fiddled with the pin a bit and now it reads it. Thanks.

 

[f1r3b1rd]

fiddled with the pin a bit and now it reads it. Thanks.

cool!

 

[skizzums]

My moonshot does the same thing, can be very annoying. Sometimes I can just find a 2mm whatever and screw the pin into the deck snug or just keep messing with the sleeve. I believe over tightening the chimney can somehow cause the issue, although I haven't been able to isolate the problem as of yet, I'm usually in too Mich a hurry so I try several things at once.