Closed: WTS mods, rta, rda

[Gregory.tomczak]

Cleaning out some of my collection to make room for new items. All items come with box and accessories unless noted.

Cuboid grey with two lg he2 batteries(red ones) and grey sleeve $45 shipped

Egrip II white less than two months old. Comes with box, new rba, 1.5ohm Clapton coil new, black and white drip tip, and 510 adapter. Has a tiny chip above the screen on the paint you can see in the pictures. But not on the screen. Asking $40

Ipv d2 black with box and black sleeve and imren imr 2250mah battery. Shows signs of use around 510 ring and small chips here and there. Asking $30

Griffin rta black 22mm. Comes with box and all accessories minus the coils that came with it but I can make two ss316 fused Claptons or other type of coils for it if the buyer wants asking $15

Horizon tech artic turbo atomizer stainless steel. Comes with box, one set of spare coils and the two blank coils if you don't want to run it with three coils and spare glass/spare orings. Asking $10

Clone lotus rda stainless steel no box or spare parts. Asking $5

Sent from my iPhone using Tapatalk

 

[JayS0ul]

Do you still have everything?

Sent from my VS990 using Tapatalk

 

[Gregory.tomczak]

Do you still have everything?

Sent from my VS990 using Tapatalk

Yes


Sent from my iPhone using Tapatalk

 

[JayS0ul]

Sweet. What's the max wattage for the cuboid?

Sent from my VS990 using Tapatalk

 

[Gregory.tomczak]

I have 150 firmware on it now but you or I could install the 200w firmware


Sent from my iPhone using Tapatalk

 

[Lazy]

Don't mean to be a Debbie downer but $40 is a lot to ask for a used cuboid even with batteries included. I'm looking at my 7-8 or 9 month old cuboid & I want to throw that fucking thing against the wall. Atomizer short errors for a month or so and now atomizer short error permanently. Even after a month of non use.

Caveat emptor for all joytech/wismec products with known shitty 510 connectors. I got lucky that my first batch rx200's have not died like that got dam cuboid. Over 50% possibility of turning into a useless brick when buying a cuboid/rx until they upgrade the 510

 

[VaporCarp]

Don't mean to be a Debbie downer but $40 is a lot to ask for a used cuboid even with batteries included. I'm looking at my 7-8 or 9 month old cuboid & I want to throw that fucking thing against the wall. Atomizer short errors for a month or so and now atomizer short error permanently. Even after a month of non use.

Caveat emptor for all joytech/wismec products with known shitty 510 connectors. I got lucky that my first batch rx200's have not died like that got dam cuboid. Over 50% possibility of turning into a useless brick when buying a cuboid/rx until they upgrade the 510

Way to crap on his sale thread

 

[Lazy]

Sorry man, my bad! I had just pulled my cuboid out before reading this thread & got into rant mode. I probably wouldn't have said anything if I wasn't looking at my cuboid. But on the other hand its good for others to know about the cuboids limitations.

 

[JayS0ul]

Sorry man, my bad! I had just pulled my cuboid out before reading this thread & got into rant mode. I probably wouldn't have said anything if I wasn't looking at my cuboid. But on the other hand its good for others to know about the cuboids limitations.

Is it the cuboids pin or the atomizers pin? I only run rbas.

Sent from my VS990 using Tapatalk

 

[Lazy]

Is it the cuboids pin or the atomizers pin? I only run rbas.

Sent from my VS990 using Tapatalk

Cuboids pin. Atomizer short with any atty that is attached to it. Might last longer if you never remove the atty

 

[Gregory.tomczak]

Sorry man, my bad! I had just pulled my cuboid out before reading this thread & got into rant mode. I probably wouldn't have said anything if I wasn't looking at my cuboid. But on the other hand its good for others to know about the cuboids limitations.

I understand we're your coming from I've received bad mods before but just because you got a bad mod doesn't entitle you to bash my post. There are sections in this forum to rant about stuff. I'm sure if you were selling an item you'd be pretty pissed if someone did nothing but bash your items for sale. It's just straight wrong and unacceptable. This cuboid is like six months old and still works as if it was new. The price I'm selling them for is with shipping. But hey I understand if it's higher then you would pay, but I look at it as it's what I'm asking for it because I feel it's worth it. If no one wants it because of the price that's fine and their choice. By the way if joyetech wasn't good mods why are they still in the game.


Sent from my iPhone using Tapatalk

 

[Lazy]

I dint bash your post, just the cuboid. Sorry if it came out that way.

My cuboid was good for 6 months also. If you do a google search for cuboid 510 you will get hundreds of posts similar to mine.

 

[iiKryptic]

@Lazy maybe think about going through and editing some of your comments. I feel that it's up to a potential buyer to research and choose for themselves and debate and conversation about hypotheticals left to our other discussion based threads. @Gregory.tomczak good luck with your sale.

 

[skt239]

I dint bash your post, just the cuboid. Sorry if it came out that way.

My cuboid was good for 6 months also. If you do a google search for cuboid 510 you will get hundreds of posts similar to mine.

Like the other poster said, edit out your text bashing the product he's trying to sell. Just because you don't understand how a forum works shouldn't mean his sales thread should suffer.

Seriously, why does this even need to be explained to you?

 

[CrazyChef]

@Lazy maybe think about going through and editing some of your comments.

Like the other poster said, edit out your text bashing the product he's trying to sell. Just because you don't understand how a forum works shouldn't mean his sales thread should suffer.
Seriously, why does this even need to be explained to you?

I second these. @Lazy the RIGHT THING TO DO is to edit yours posts. Plain and simple.

 

[CrazyChef]

Oh, and @Gregory.tomczak GLWYS, even if some unthoughtful person tainted this thread.
I can attest for the Cuboid. I've had one for over a year, with absolutely no problems.

 

[BrewBear]

I second these. @Lazy the RIGHT THING TO DO is to edit yours posts. Plain and simple.

I'll third this. We all got raw deals on occasion, but that's no reason to pee in the guy's soup! I'm sure there is a Cuboid thread, you could go there and bitch about it to your heart's content and if there isn't one, feel free to start it.

 

[Gregory.tomczak]

Please close this thread maybe I'll put a new one up in a few days or so.


Sent from my iPhone using Tapatalk

 

[iiKryptic]

Please close this thread maybe I'll put a new one up in a few days or so.

That's probably for the best, hopefully next time everything goes smooth for you friend.