Hi, what's a good sub 100 dollar regulated box mod for cloud chasing? Does it really matter what box mod I get? Does the max wattage output of a mod matter when looking for a cloud chasing mod? Thanks.
Become a Patron!
Cloud chasing mod?
- Thread starter jaleesdaniel
- Start date
its not so much the mod but more the type of juice you use the build you have sometimes the wicking material but a good mod that i have which i will hopefully be upgrading soon is the smok m80 plus its an 80watt box mod with mech mode wattage mode and an okay temp mode i feel not to sure havent tried it yet it can fire safely down to .1 ohm i actually found this out because i had 22g kanthal build and it was just at the .1 mark which was still scary for a second but i was just running in wattage mode to be safe firing at 65 to 70 watts
however things to look for in a good regulated mod are the fail safes that they have like short protection overheating new atomizer check a built in ohm meter(which are not 100% accurate) just to name a few
i do love the smok m80 its small enough to have in my pocket which i can also lock the atomizer to prevent accidental firing thus burning or blowing up your leg it has dual 18650s that not accessible to be changed which is kind of a draw back but its a lot safer that way i run it with a sapor addy runnning dual twisted 24g kanthal build with 5-6 wraps it .18 ohms with one vertical coil and one horizontal coil which i call the vertizontal coil it gives off a great cloud when heated up right and awesome flavor running mostly 70/30 vg/pg and up to max vg
but thats just me
however things to look for in a good regulated mod are the fail safes that they have like short protection overheating new atomizer check a built in ohm meter(which are not 100% accurate) just to name a few
i do love the smok m80 its small enough to have in my pocket which i can also lock the atomizer to prevent accidental firing thus burning or blowing up your leg it has dual 18650s that not accessible to be changed which is kind of a draw back but its a lot safer that way i run it with a sapor addy runnning dual twisted 24g kanthal build with 5-6 wraps it .18 ohms with one vertical coil and one horizontal coil which i call the vertizontal coil it gives off a great cloud when heated up right and awesome flavor running mostly 70/30 vg/pg and up to max vg
but thats just me
also the box ran me about 85ish dollars but it should be a little cheaper now because of their new box the x cube 2
I've found I'm a cloud chaser at heart, lol
That said, I prefer mods with at least 100w available and can fire down to .1 ohm
My favorite build blows good clouds seen here at 75w on my 150w IPV3..
Notice my avatar?
Its from this cloud pic having fun fogging up my room under the black light...same mod, lol
So yes, the right mod /RDA with a good build is awesome cloud chasing, least it's that way with me..
sent from my XT1080 via Tapatalk
My build in above pics is 7 wraps of 24g Kanthel on a 3mm bit at .22 ohms.
The Dark Horse with the chuff cap is my favorite cloud blowin RDA to date..
Don't know about the hellboy, I've never owned one...
sent from my XT1080 via Tapatalk
itsmenotyou
Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I twisted 24 ga and did 8wraps on a 3mm bit. Ohmed out to .36 and could handle 200 watts like a pro. Could try twisted 24 with 5-6 wraps and see where that gets you.
sent from a dumb operated smart phone
sent from a dumb operated smart phone
VapeRN
Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Here's twisted 24g, 3mm, 7 wraps. Ohms at .22 and blows plumes at 90w on my Sigelei 150tc. I can take it higher as well, but hits great on this Velocity clone. Super easy build, and I'm a noob.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk