Cloudmaker Whiteout dna and sx...... issues?

[f1r3b1rd]

 

[Mattp169]

could just be empty boxes...

 

[Hank F. Spankman]

could just be empty boxes...

 

[Mattp169]

and is that a beer bottle on the table there by the water bottle. Great idea drunk shipping team sends @f1r3b1rd empty box, err mod to india

 

[f1r3b1rd]

So long as its a good beer, I can forgive.

 

[Hank F. Spankman]

and is that a beer bottle on the table there by the water bottle. Great idea drunk shipping team sends @f1r3b1rd empty box, err mod to india

 

[BadLuckAndTrouble]

So long as its a good beer, I can forgive.

Not a green bottle, cant be Rolling Rock, fail.

 

[f1r3b1rd]

fuck me blue, scheduled for delivery Tuesday

 

[Mattp169]

your empty box will be there tuesday....AWESOME. so what is that 7 months

you know in all seriousness.....
what if there is a warranty issue immediately?
they dont have extra dna boards or extra mods...kinda worry some imho

 

[f1r3b1rd]

your empty box will be there tuesday....AWESOME. so what is that 7 months

6 months past the original deadline; but, 7 months since I paid.

 

[Vlad1]

6 months past the original deadline; but, 7 months since I paid.

What you didn't pay expedited shipping 7 months ago? rofl

 

[f1r3b1rd]

What you didn't pay expedited shipping 7 months ago? rofl

hey vlad! its almost as bad as a package going through oompaloompa florida hahaha

 

[Vlad1]

hey vlad! its almost as bad as a package going through oompaloompa florida hahaha

Haven't really kept up on this but just enough to know it was less speedy to market. Hope it meets your expectations when you do get it in hand.

 

[Mykline]

hey vlad! its almost as bad as a package going through oompaloompa florida hahaha

Most of my stuff goes through there. Took a week one fine to go from Hollywood, FL to Adventure, Fl. Hollywood is a ten minute drive from me. It went through the oompaloompa Florida post office. Lol

Sent from my SM-N920T using Tapatalk

 

[f1r3b1rd]

Haven't really kept up on this but just enough to know it was less speedy to market. Hope it meets your expectations when you do get it in hand.

hahahahaahaha, I'm gonna check it out, do a quick write up for some friends that are curious about it at the other place; and, then put it back in the box. I quite vaping the day after Christmas. This is one of those principled finish what I started things. I do wanna keep it as my 'last cig'

Most of my stuff goes through there. Took a week one fine to go from Hollywood, FL to Adventure, Fl. Hollywood is a ten minute drive from me. It went through the oompaloompa Florida post office. Lol

Sent from my SM-N920T using Tapatalk

ive ordered a few rda's and mods from vapinart and 9 mods and 6 rdas from vaporshark, a friend is a shopowner and rep here, each tim we order from one of them we laugh our ass off because it takes almost 2 weeks to get from there to Louisiana.

 

[Mykline]

hahahahaahaha, I'm gonna check it out, do a quick write up for some friends that are curious about and then put it back in the box. I quite vaping the day after Christmas. This is one of those principled finish what I started things.

ive ordered a few rda's and mods from vapinart and 9 mods and 6 rdas from vaporshark, a friend is a shopowner and rep here, each tim we order from one of them we laugh our ass off because it takes almost 2 weeks to get from there to Louisiana.

I have gotten stuff from China faster then that. Lol

Sent from my SM-N920T using Tapatalk

 

[f1r3b1rd]

I have gotten stuff from China faster then that. Lol

Sent from my SM-N920T using Tapatalk

hahahahaha!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! doesn't surprise me one bit! hahaha that post office is a blackhole

 

[Vlad1]

hahahahaahaha, I'm gonna check it out, do a quick write up for some friends that are curious about it at the other place; and, then put it back in the box. I quite vaping the day after Christmas. This is one of those principled finish what I started things. I do wanna keep it as my 'last cig'

ive ordered a few rda's and mods from vapinart and 9 mods and 6 rdas from vaporshark, a friend is a shopowner and rep here, each tim we order from one of them we laugh our ass off because it takes almost 2 weeks to get from there to Louisiana.

Ahh well congrats on quitting. I'm still whittling my way in that direction. Went down to 3mg about a month ago so probably another month and I'll try for 1.5mg then a few months later try 0. Kind of lost focus for a few months but regrouped at the end of the year.

 

[f1r3b1rd]

Ahh well congrats on quitting. I'm still whittling my way in that direction. Went down to 3mg about a month ago so probably another month and I'll try for 1.5mg then a few months later try 0. Kind of lost focus for a few months but regrouped at the end of the year.

I stuck it out longer than I originally planned, but it was so much fun with all the new toys I had no choice
was kidding yesterday that its gonna be harder to quit the forum.

 

[f1r3b1rd]

Well i'll be goddamned!!!
It showed up a day early... first impression?5 months and 29 days late lol
Its build quality is better than I expected. Its wbugger than I thought, but I was expecting larger than average because of it being modular. I'm ok wto with the size. its clean on the inside, well done, just a tad clunky but again, that comes to be expected.
Overall-A+++ cloudmaker team, for all the shit that it took, they did a damn good job. way to go Jeremy and the team.
I'll follow up a bit later after som comparison and closer look

The cloudmaker/aeolus, vaporshark dna200 /petri hexohm/indestructible

I have green panels ordered to replace the silver.... think gal can see the plan

 

[Wingsfan0310]

Congratulations Firebird!

 

[Mattp169]

well ill be damned

grats @f1r3b1rd
gratz to cloudmaker for finally delivering
lets hope the trend continues

 

[sandduner8]

Sweet finally it's here ......


Sent from my iPad using Tapatalk

 

[Grego]

Nice!! Months late yet a day early

 

[Zamazam]

Well i'll be goddamned!!! It showed up a day early... first impression?
Its build quality is better than k expected. Its bugger than I thought, but I was expecting larger than average because of it being modular. I'm ok wto with the size. its clean on the inside, well done, just a tad clunky but again, that comes to be expected.
Overall-A+++ cloudmaker team, for all the shit that it took, they did a damn good job. way to go Jeremy and the team.
I'll follow up a bit later after som comparison and closer look

The cloudmaker/aeolus, vaporshark dna200 /petri hexohm/indestructible

I have green panels ordered to replace the silver.... think gal can see the plan

You've got enough room to put in a 3s 2500Mah LiPO!

 

[f1r3b1rd]

You've got enough room to put in a 3s 2500Mah LiPO!

Yeah, I'm guessing the space is intended for the squonk thingy

 

[Zamazam]

Squonk or extended battery capacity? I'd be a toss up for me.

 

[f1r3b1rd]

Squonk or extended battery capacity? I'd be a toss up for me.

My Plan was to go to the dual 18650 configuration with the squonk

 

[Donald]

The bottom was suppose to be for a terminal block but they switched it out for the bullet connectors after they ordered the batteries.

 

[f1r3b1rd]

The bottom was suppose to be for a terminal block but they switched it out for the bullet connectors after they ordered the batteries.

ahhhhh duh that's though right, I wanted to ask about chanungnthe 1100 to a bigger pack but ummmmm.....

 

[Zamazam]

Think you can fit a triple 26650 sled in it?

 

[Donald]

ahhhhh duh that's though right, I wanted to ask about chanungnthe 1100 to a bigger pack but ummmmm.....

I haven't received mine but if the lower tab could be moved or removed it should be possible. There is a 1300 mah battery on hobby kings that is similar sized according to what cmt has put out.

 

[f1r3b1rd]

Think you can fit a triple 26650 sled in it?

Bahahas!!! No.
Fitting two would look like a Walmart shopper

 

[Wingsfan0310]

Three 26650's would be 300 grams in batteries alone

 

[f1r3b1rd]

The bottom was suppose to be for a terminal block but they switched it out for the bullet connectors after they ordered the batteries.

pretty sure that tab won't move willingly

 

[Fictitious Character]

Well i'll be goddamned!!!
It showed up a day early... first impression?5 months and 29 days late lol
Its build quality is better than I expected. Its wbugger than I thought, but I was expecting larger than average because of it being modular. I'm ok wto with the size. its clean on the inside, well done, just a tad clunky but again, that comes to be expected.
Overall-A+++ cloudmaker team, for all the shit that it took, they did a damn good job. way to go Jeremy and the team.
I'll follow up a bit later after som comparison and closer look

The cloudmaker/aeolus, vaporshark dna200 /petri hexohm/indestructible

I have green panels ordered to replace the silver.... think gal can see the plan

Glad to see you got your suitcase. I logged in just to see if you did because I was seeing some in the wild on fb. Grats on proving its existence to us skeptics.

 

[f1r3b1rd]

Glad to see you got your suitcase. I logged in just to see if you did because I was seeing some in the wild on fb. Grats on proving its existence to us skeptics.

no worries brother! thank you and everyone else for the support when we didn't kmow what was up.

Gotta say this concept is awesome. for anyone that is a little mechanically inclined, this is like a mod erector set

 

[Fictitious Character]

no worries brother! thank you and everyone else for the support when we didn't kmow what was up.

Gotta say this concept is awesome. for anyone that is a little mechanically inclined, this is like a mod erector set

I was really interested before and almost moved on the preorder, but instead I bought the Opus dna200 for relative instant gratification. I am still interested but I wish they could get it a little bit smaller. I understand the reason for the blocky bulk, but still long for the dream.

 

[sandduner8]

Hopefully we will see some SX whiteout Picts soon


Sent from my iPhone using Tapatalk

 

[f1r3b1rd]

I was really interested before and almost moved on the preorder, but instead I bought the Opus dna200 for relative instant gratification. I am still interested but I wish they could get it a little bit smaller. I understand the reason for the blocky bulk, but still long for the dream.

Totally agreed!!!!! Can't help but think you made a much better choice, lol

 

[sandduner8]

Well now that you have it in your hands ... Would you buy it again minus the wait lol


Sent from my iPhone using Tapatalk

 

[f1r3b1rd]

Well now that you have it in your hands ... Would you buy it again minus the wait lol


Sent from my iPhone using Tapatalk

Assuming the modular parts and add ons materialize
Yes, yes I would. this quality and the options make it a total winner
Its also not bad to hold. its no vaporshark, but its not bad

 

[f1r3b1rd]

So totally took it to bits to see thru concept better ...this will be awesome
And another nice touch. the president of CMT, signed a thank you note on each invoice.
- I think that shows a touch of class.

 

[f1r3b1rd]

 

[sandduner8]

Like the vid ...... Even liked the company logo sticker ... Wish they included them in the box ......


Sent from my iPad using Tapatalk

 

[f1r3b1rd]

that card was in the box, and a little thank you note.
but, I was just glad that there was a mod in the box. Lol

 

[sandduner8]

Very excited for you . I am in batch order 2 So I have more handful of days to wait


Sent from my iPad using Tapatalk

 

[Vlad1]

Good quality video production and I'm sure informative for the owners. But all I could think of was ruined devices from no ESD protection, stripped threads, destroyed OLED, pulled traces etc.. I hope it doesn't happen but it's bound to for some.

 

[sandduner8]

Dam just seen all the Reddit on the white outs ..... Not looking good at all


Sent from my iPad using Tapatalk

 

[f1r3b1rd]

hope they can make it work. that blows donkey balls. 7 month wait, then doa.
shit on life.