Cloupor 30w mini purchased..

[HellB]

Bad advertising that what it was look at the other forum for the istick 50w owners, is just dead mod auto firing auto shut down changing auto from volts to watts... seems to me that the istick is giving far more problems than 2 or 3 cloupor than over heated.

Sent from my GT-S7580 using Tapatalk

 

[Mike H.]

Been away for a few with work and home repairs but ive had my cloupor now a few days and its really a great little box..Smaller than i thought initially...Seems to read ohms accurate enough...Super easy to change batteries...Came with about 5 extra 510 connection screws ,a small screwdriver ,a nice little carry pouch and easy enough to read instructions...Have no complaints really with it as of yet.

Since it is a 3.6v minimum output..if you dont set your wattage high enough to the ohms you have, the ohm portion of the read out will flash on you as its big brother the cloupor cana does ...In other words you have to set the wattage to equal 3.6v of output to not have your ohms flash on you.

This little box is not really intended for the larger tanks..My full size protank 2 is a pretty nice match to it size wise...A 22mm tank will has some overhang but it doesnt bother me personally.

This Cloupor for sure has replaced the sigelei mini i decided to keep and use just because its a bit smaller and fits better in the pocket and also has the ability to fire 15 seconds with your draw...this is something which i didnt like with the sigelei only being an ego battery sized 7 second firing limit...With some tighter draw tanks some may appreciate that from this little cloupor beast of a mini box.

Considering so far everything is working as it should i can highly recommend this little box...time will tell how it holds up in the long run.

Will post up some pics another time.

 

[nightshard]

You know that maybe a clone from them right?
I bought a hana mini thinking it was authentic and it wasn't

What? A clone of a Cloupor and only 5% discount? They should hand those out for free


There are no stupid batteries, just stupid people.

 

[2c5000]

Been away for a few with work and home repairs but ive had my cloupor now a few days and its really a great little box..Smaller than i thought initially...Seems to read ohms accurate enough...Super easy to change batteries...Came with about 5 extra 510 connection screws ,a small screwdriver ,a nice little carry pouch and easy enough to read instructions...Have no complaints really with it as of yet.

Since it is a 3.6v minimum output..if you dont set your wattage high enough to the ohms you have, the ohm portion of the read out will flash on you as its big brother the cloupor cana does ...In other words you have to set the wattage to equal 3.6v of output to not have your ohms flash on you.

This little box is not really intended for the larger tanks..My full size protank 2 is a pretty nice match to it size wise...A 22mm tank will has some overhang but it doesnt bother me personally.

This Cloupor for sure has replaced the sigelei mini i decided to keep and use just because its a bit smaller and fits better in the pocket and also has the ability to fire 15 seconds with your draw...this is something which i didnt like with the sigelei only being an ego battery sized 7 second firing limit...With some tighter draw tanks some may appreciate that from this little cloupor beast of a mini box.

Considering so far everything is working as it should i can highly recommend this little box...time will tell how it holds up in the long run.

Will post up some pics another time.

got mine yesterday and so far i love it. nicely built and the size is great.

i wish i could adjust it lower than its capabilities, but so far so good.

 

[cindycated]

Not gonna lie. The Cloupor Mini entered my radar when I saw the lime green silicone sleeve.

Here's the safety check procedure to make sure you got a good one:

Really, Pbusardo? A 45min vid? Just couldn't do it.

 

[deno314]

Yeah,a lot of mini vapers are maxing out on this mini devices, I know they are advertised a certain wattage, but it doesn't mean you have to vape it that way... You have to have a wiggle room for the box, if you are a 10-15 watts kinda guy a mini 30 watt box mod is perfect (VAPINGREEK), if you are a 16-30 watts kinda guy i suggest get a 35-50 watts box mod....IMO
#WIGGLE ROOM...
BIGBOYVAPER

I've got a subtank mini w my rba in @.6 ohms I'm vaping @ 20w chucking the vape & getting awesome flavor .....so I'm super happy w my cloupor mini 30w

 

[2c5000]

those of you who have ordered the silicone sleeve from gearbest... is the wait on delivery about the same as fasttech?

 

[Whiskey]

those of you who have ordered the silicone sleeve from gearbest... is the wait on delivery about the same as fasttech?

Longer, they suck for turn time I am not a fan....LOL

 

[HellB]

Mine shipped on Thursday from GB.

Sent from my GT-S7580 using Tapatalk

 

[Paul Wong]

why so cheap?

 

[cindycated]

Buy them from a typical store in the US and they'll cost more, like in the $42 range. Plus it's a 30W and prices in general have been dropping on those. I guess 50W is the new 30W now.

 

[2c5000]

i have decided to put a YiHi SX350J chip into my cloupor mini.

cant wait!

 

[2c5000]

so the gearbest silicone sleeve... how can i remove the gearbest logo on it?

i have tried to scratch it off to no avail. any tips?

 

[Newtsche]

so the gearbest silicone sleeve... how can i remove the gearbest logo on it?

i have tried to scratch it off to no avail. any tips?

I don't know but I'm pretty sure I recently saw they also offer the sleeves with no logo. I got one from Fasttech, they have three styles, all under two bucks, about a week and half delivered. I got a black one with no hole pattern cut in and a strap across the top.

I have to say the Cloupor Mini is far and away my favorite setup. I use an Aspire Nautilus Mini. OK the sleeve makes battery changing far less easy but, considering how much time the Cloupor spends in my hand, with the silicon sleeve on, NICE!!!

 

[Mike H.]

Im sad to report my mini burned up for the most part at work last night...Took a vape off it and went to put it back in my shirt pocket and heard it still firing..The button wasnt stuck or anything...got that famous (from older dna clone) too hot message...took the battery out..put it back in..seemed fine but it was now firing a very low voltage to where i didnt have to press the firing button to vape basicly but not showing on the screen that im firing it...The inside smells burned up...It still powers up just fine and acts as if nothing is wrong but if i leave the battery in it it keeps firing and eventually the mod and battery get hot.

So my joy has now turned to sadness with the cloupor mini 30 watt...Back to my sigelei.

 

[RobbieR]

@Mike H.

That sucks Mike!!

I was reading this thread because I was interested in buying one. Do you think yours was a clone?

 

[Mike H.]

@Mike H.

That sucks Mike!!

I was reading this thread because I was interested in buying one. Do you think yours was a clone?

Cloupor as far as i know have used their cloned version of the "DNA" chip set, so its a clone even if its authentic, if that makes any sense..lol

Its an "authentic" sold through gearbest which is where i bought mine from.

In any case ,i wasnt one of the lucky ones with mine..Some have had theirs alot longer with no problems so its a roll of the dice for everyone.

So everyone knows, i never once charged through the USB port and used it at a maximum of 12 watts..So i would say i hardly pushed it in any way...Just got a bad one.