Become a Patron!

Cold vape :-(

O

Ombha19

Help! Stopped smoking now coming on 2 weeks. I bought a istick 60w tc and was using the standard .3ohms coil without any hassle. I then got a burning sensations so I changed the cool to a .5ohms Ti cool that eleaf provided I am now getting a cold vape after getting a very good vape since this morning, also with no flavour. I primed the cool properly and actually left it over night.

I'm banging my head against a wall. I'm vaping at around 250 to 300 c on Ti setting.

Also the tank I have is the melo 2. Any help would be much appreciated :)
 
Jimi D

Jimi D

Gold Contributor
ECF Refugee
Member For 5 Years
I hear ya. I banged my head til it bled with TC. Went back to good ol' wattage mode :)
 
Jimi D

Jimi D

Gold Contributor
ECF Refugee
Member For 5 Years
Ombha19 said:
You think I should just stick it on wattage with the coils I have?
Click to expand...
You'll have to get rid of the titanium and use kanthal, or nichrome. The resistance is too low with titanium.
 
SirRichardRear

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Ombha19 said:
Help! Stopped smoking now coming on 2 weeks. I bought a istick 60w tc and was using the standard .3ohms coil without any hassle. I then got a burning sensations so I changed the cool to a .5ohms Ti cool that eleaf provided I am now getting a cold vape after getting a very good vape since this morning, also with no flavour. I primed the cool properly and actually left it over night.

I'm banging my head against a wall. I'm vaping at around 250 to 300 c on Ti setting.

Also the tank I have is the melo 2. Any help would be much appreciated :)
Click to expand...
you can't use Ti coils in wattage mode
 
O

Ombha19

Jimi D said:
You'll have to get rid of the titanium and use kanthal, or nichrome. The resistance is too low with titanium.
Click to expand...


Aww man I just bought these coils! Thanks for the advice man! I'll have to just keep cleaning it out and start again until the coils come now.
 
SirRichardRear

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Ombha19 said:
I won't, it was really annoying as it was vaping fine then suddenly i was getting no flavour what so ever
Click to expand...
yeah i understand. make sure you aren't chain vaping and you give the coils enough time to wick. some tanks need more time then others.
 
H

HondaDavidson

Gold Contributor
Member For 4 Years
Get a Ni or SS coil if you want to use TC, Get a SS, Kanthal or Nichrome coils if you want to use VV or VW or Bypass/unregulated.

Get used to buying coilheads.... It's part of the deal...... Or get a rebuildable tank or coilhead..... You should not expect to get more than about a week from a coil head or wick. Before they must be cleaned or replaced. Sure sometimes you will get longer life... Just don't plan on it...

Me, I found building my own coils less frustrating than constantly replacing burnt coil heads. I started by rebuilding Protank and Nautilus heads. This means you dont need to buy anything more than some wire to learn to build. You can use an old coilhead and your current tank. If i had to depend on factory coil I would still be smoking 1-2 PAD. Instead of being Smoke free for 2 years.
 
MyMagicMist

MyMagicMist

Diamond Contributor
ECF Refugee
Member For 5 Years
Well, I'll add two pennies here. I agree with @HondaDavidson & @Carpomarx, using rebuildable coils is nice. Recently, got two 100 ft rolls of Kanthal each for around $6 or less. If I use approximately 6 inches per coil I'll get about 50 coils out of a roll. Rather pay $6 for 50 than $6 for 3 or 5, especially when I can make the coils to my personal specs.
 
You must log in or register to reply here.

VU Sponsors

Top