Become a Patron!

Cthulhu RTA III (Deck Swap System &19.8mm building deck!)


CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
Cthulhu RTA

Features:

1.Cthulhu RTA III comes with dual coil deck and single coil deck(1 set Cthulhu RTA III = 2 atomizers!);
2.Big building deck(dia.19.8mm/0.78in)
3.Cthulhu two-step-chimney, improving flavor.
4.Top refill,liquid flow control,and 5ml capacity
5.Huge air flow (Cross-sectional area of free air holes = Cross-sectional area of chimney)
6. Bigger wire holes (dia.3mm ).
7.Side air flow design and bigger inner dia. 7.5mm chimney.
8.Cthulhu deck swap system
9.Better industrial design and machining
10.304 food-grade stainless steel and PEEK insulator
11.Customized M3.5 hex screw,say no to strip.







Official Site: http://www.cthulhumod.com/
 
Last edited:

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
All wholesale orders will be sent out next Friday. We are working hard on the box. :)
 

Zamazam

Evil Vulcan's do it with Logic
VU Donator
Platinum Contributor
Member For 4 Years
Member For 3 Years
Want's your minimum order and capacity per month?
 

freemind

Gold Contributor
Member For 4 Years
Member For 3 Years
What type of screws do you use for setting the coils? Phillips, or hex?
 

Zamazam

Evil Vulcan's do it with Logic
VU Donator
Platinum Contributor
Member For 4 Years
Member For 3 Years
Is the airflow adjustable?
 

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
Cthulhu RTA



We use medical grade stainless steel.

4ml capacity tank.





Adjustable air flow;



Top refill & bottom refill design;





4 * 2.5mm round jiuce channels(work well with cotton wick);

Negative posts are milled into the deck(made by one metal with the deck);

Dual coils support(Dia. 1.6mm wire hole);





Adjustable copper positive pin(copper will not touch your juice);



Cross section of chimney is larger than the sum of two air holes;

Pyrex Clear tube;

Height: 55.5mm / 2.18 in (without drip tip); 70mm / 2.75 in (with drip tip)

Diameter: 22mm / 0.87 in

We are looking for distributors, email: [email protected]
 

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
cthulhu vs goblin pics (by SmogLA)

cthulhu comes with more parts


cthulhu glass is thinner


the cthulhu chimney is significantly bigger


cthulhu comes with grub screws vs phillips


cthulhu 510 has a beefy fully adjustable pin


how about those juice channels? :)


no really, it does.


TVC's video
 
Last edited:

efektt

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Its in pretty bad taste to post something like this.
 

UncleRJ

Will write reviews for Beer!
Staff member
Senior Moderator
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
VU Challenge Team
Reviewer
The post is fine by me.

And I would imagine that if anyone that is trying to decide wich of the two devices to purchase it would be quite helpful.
 

efektt

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Yes but that should be done by a user, not a manufacturer. As a business owner myself, I know trying to make a different manufacturer look bad, or comparing your product yo theirs is just bad business, how bout a price comparison too while your at it?
 

dre

Gold Contributor
Member For 4 Years
ECF Refugee
All he did was compare it. I see nothing really wrong
Must admit he caught my attention and set the hook pretty deep :)
 

efektt

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
All he did was compare it. I see nothing really wrong
Must admit he caught my attention and set the hook pretty deep :)
So i guess you would have no problem with a clone manufacturer coming in here and comparing their product to his?
 

TheWestPole

Gold Contributor
Member For 4 Years
cthulhu vs goblin pics (by SmogLA)

cthulhu comes with more parts


cthulhu glass is thinner


the cthulhu chimney is significantly bigger


cthulhu comes with grub screws vs phillips


cthulhu 510 has a beefy fully adjustable pin


how about those juice channels? :)


no really, it does.

I'm attracted to the bigger diameter deck, which looks very good, and wondering whether the chamber threading is compatible with Orchid (M14 x .5) as it is with Silverplay. This is an issue for those of us who want to configure tanks to get different capacities using compatible parts.
 

BumbaCLot

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
Ever hear of the Pepsi challenge?
 

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
So i guess you would have no problem with a clone manufacturer coming in here and comparing their product to his?
We don't think it is a clone.
Different size;
Different outlook;
Different desk size;
Different airflow design;
Different refilling way;
Different top cap;
Different juice channel;
Different drip tip;
Support 3mm coil;


Could we say all RTAs are clone Kayfun(because all RTA are benefit from Kayfun)?
Thx
 
Last edited:

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
Yes but that should be done by a user, not a manufacturer. As a business owner myself, I know trying to make a different manufacturer look bad, or comparing your product yo theirs is just bad business, how bout a price comparison too while your at it?
we do not compare it. The pics is made by SmogLA. we just repost it. thx
 

efektt

Silver Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
We don't think it is a clone.
Different size;
Different outlook;
Different desk size;
Different airflow design;
Different refilling way;
Different top cap;
Different juice channel;
Different drip tip;
Support 3mm coil;


Could we say all RTAs are clone Kayfun(because all RTA are benefit from Kayfun)?
Thx
Never said it was a clone. Where are these being manufactured?
 

sohkis

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Member For 5 Years
looks interesting.

looks like improvements all over, aside from the airflow inlets which appear to be much larger on the goblin:
 

Rhyno636

Silver Contributor
Member For 4 Years
I'm sure it leaks like the goblin too. I wish it had juice control like the goliath. It's actually not even juice "control", it's a juice shut off valve so you're sure it won't leak in your pocket. You gotta run it wide open. It won't consume more juice than it can actually vaporize. Trying to throttle the juice availability is hindering flavor and just asking for a dry hit.
 

MikeSully

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
I'm sure it leaks like the goblin too. I wish it had juice control like the goliath. It's actually not even juice "control", it's a juice shut off valve so you're sure it won't leak in your pocket. You gotta run it wide open. It won't consume more juice than it can actually vaporize. Trying to throttle the juice availability is hindering flavor and just asking for a dry hit.
My vertical coil build had so much cotton and sprayed so much juice in my mouth I kept the JCR at 50% unless I wanted to exceed 100 watts.
 

Rhyno636

Silver Contributor
Member For 4 Years
Can you share pics of your vertical build? How high have you cranked it for continuous vaping on horizontal coils?
 

MikeSully

Bronze Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Can you share pics of your vertical build? How high have you cranked it for continuous vaping on horizontal coils?
Actually, I posted one here. Post 29. I have a different build on it now. Horizontal 0.8 ohm (26 ga, 2.5mm, 13 wrap) which i keep on my dual series box and chain vape the bejeesus out of.
 

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
What happened here? One guy has metal shavings in the air channels, and another one wasn't finished being machined

http://www.reddit.com/r/electronic_..._cthulhu_rta_is_full_of_metal_left_over_from/

http://www.reddit.com/r/electronic_.../apologize_for_metal_shavings_of_cthulhu_rta/
  • Our team apologize for metal shavings of Cthulhu RTA.
  • if you get the problem, please feel free to contact us for replacement (email: [email protected])
  • please clean it with medical alcohol and water before using it.
  • our team is upgrading the cleaning method now. We will use air pump to clean it before using the ultrasonic cleaning machine. (second batch will use this method)
  • We had sold out first batch 1000pcs. And receive 3 complaints untill now.
  • We are very sorry for the problem and will do our best to improve quality.
 

Robert B

Gold Contributor
Member For 4 Years
Would you pay for the hospital bills if this guy sucked a chunk of this into his lungs???
http://www.reddit.com/r/electronic_cigarette/comments/33sluh/wait_a_minute_is_that_a_spring/

This is precisely the kind of bs out of China that is going to get this industry regulated. There is no excuse for this. "will do our best to improve quality" doesn't cut it. Get it done or go out of business.

If you were really concerned, you would send out a recall for all 1000 of them. Any company in the US would never be able to get away with this. This is an inhalation device, not some kind of car part or toy.
 
Last edited:

CthulhuMod

Bronze Contributor
Member For 4 Years
IN JAIL
Unlisted Vendor
Would you pay for the hospital bills if this guy sucked a chunk of this into his lungs???
http://www.reddit.com/r/electronic_cigarette/comments/33sluh/wait_a_minute_is_that_a_spring/

This is precisely the kind of bs out of China that is going to get this industry regulated. There is no excuse for this. "will do our best to improve quality" doesn't cut it. Get it done or go out of business.

If you were really concerned, you would send out a recall for all 1000 of them. Any company in the US would never be able to get away with this. This is an inhalation device, not some kind of car part or toy.
Thank you for your advice, we will talk to our boss.
 

VU Sponsors

Top