OneVape AirMOD SE Pod System Kit $27.99
Original OneVape AirMOD SE is one of the most fashionable pod system vape starter kit, for vapers of all experience levels. The super sleek design measures just 13mm thickness it will happily slip into the smallest of pockets. This lightweight pod system weighs only 32g, perfect for on-the-go vaping takes you. Equipped with a built-in 700mAh battery, can support daily use for heavy users. Get rid of frequent charging and focus on your everyday vaping as you want. Quickly fully charge your AirMOD SE in just 60 minutes via the USB Type-C charging port at the bottom of the device. The AirMOD SE has variable wattage from 1W to 25W. It only has one button but it's multifunctional and it has an elegant 0.69" OLED Screen. Set-up and maintenance are quick thanks to the newly designed user interface.
OVNS Saber III Pod System Kit $21.99
Original OVNS Saber III Pod System Vape Starter Kit is powered by 700mAh built-in battery with maximum 25W output. Equipped with OLED Screen to display the vaping data clearly. OVNS Saber III Pod Cartridge holds 2.5ml capacity, adopts airflow adjustment which comes with two coils. OVNS Saber III Pod System vape starter Kit charged by Type-C port for fast charging, only 40 mins for fully charged. Supports both button and pneumatic start modes, and either mode will give you plenty of cloud experience.
OneVape AirMOD SE Replacement Pod Cartridge with 0.8ohm MTL DC Coil(3 PCS) $8.98
Original OneVape AirMOD SE Pod Cartridge is specially designed for OneVape AirMOD SE Pod System Vape Kit, with a capacity of 3.0ml ensures a delectable vaping experience. The translucent pod made of PCTG helps to observe the e-liquid more intuitively. The mouthpiece is smooth to find a shape that nice and naturally fits the lips. Within the pod cartridge is the 0.8ohm Dual Coil, an MTL coil that delivers optimal flavor and a satisfying throat hit. Two symmetrically distributed air inlets on the top that allow more air to enter. The two-way vertical airway brings the direct-to-coil airflow, enhancing the flavor rendering and providing rich vapor production. Designed for mouth-to-lung (MTL) users, the AirMOD SE DC 0.8ohm Pod cartridge is best used between 15W and 25W. The pod is firmly held in place by two strong magnets on the base of the pod.
OVNS Saber III Replacement Pod Cartridge with 1.0ohm MTL Coil(4 PCS) $8.59
Original OVNS Saber III Pod Cartridge holds 2.5ml capacity, is specially designed for OVNS Saber III 700mAh Pod System Vape Starter Kit, adopts airflow adjustment which comes with 1.0ohm MTL coil.
OVNS Saber III Replacement Pod Cartridge with 0.6ohm DTL Coil(4 PCS) $8.59
Original OVNS Saber III Pod Cartridge holds 2.5ml capacity, is specially designed for OVNS Saber III 700mAh Pod System Vape Starter Kit, adopts airflow adjustment which comes with 0.6ohm DTL coil.
Xtar ANT MC1 Plus Charger for 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 22650 / 25500 / 26650 $8.99
The Original XTAR ANT MC1 Plus battery charger has been upgraded with a tiny display to easily read the charging current, the battery power and the charging status. ANT automatically chooses the most suitable charging current (0.5A or 1A) for your batteries to ensure the longest lifespan of them. Mini but mighty, ANT can fully charge a VTC5 in 3 hours with 1A just like an ant can lift 20 times its own body weight. Inserting your battery, ANT will take care of the rest.
XTAR PB2S Portable Power Bank Dual-role Fast Charger for 3.6V /3.7V Li-ion/IMR/INR/ICR/18650/18700/20700/21700 $24.99
The XTAR PB2S Portable Power Bank Charger is not an intelligent Li-ion battery charger, but also a portable power bank, charges your mobile devices anywhere and anytime in outdoors. Support the most popular QC3.0 + PD3.0 dual-protocol fast charging, compatible with most phones' fast-charging adapters on the market, easy for match and use. Apply to 3.6V / 3.7V Li-ion / IMR / INR / ICR: Unprotected 18650 / 18700 / 20700 / 21700 and protected 18650 batteries. Shows real-time charging / discharging current and voltage, and battery capacity percentage, and supports a one-handed button to check each battery' s charging voltage and current. Type-C and USB-A ports can both be used for output and charge two external devices at the same time, more convenient for outdoor usage. You can DIY the capacity of the power bank up to 10000mAh+. If there are enough batteries, PB2S is your outdoor charging station. The negative pole of PB2S applies high-quality metal material. Compared with the previous generation, it has a stronger conductivity and smaller impedance. PB2S comes with a magnetic cover, which can prevent dust and other things from falling in the slots, and prevent the batteries from dropping out of the slots. There are multiple protections that ensure your safety.
[Ships from Battery Warehouse] Original Golisi S26 IMR 18650 2600mAh 3.7V 35A Flat Top Rechargeable Battery(2 PCS) $13.99
Golisi S26 IMR 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 2600mAh large battery capacity with 35A max continuous discharging current. Long storage life, light weight and high energy density.This product comes with 2 pieces (2 PCS) of batteries.
HD Screen Protector Privacy Technology High Hardness Protective Film for iPhone 12 / iPhone 12 Pro $5.99
HC F01 HD Screen Privacy Technology High Hardness Protective Film is suitable for iPhone 12 / iPhone 12 Pro.
The iPhone 12 / iPhone 12 Pro privacy screen protector designed for iPhone 12 / iPhone 12 Pro 2020, great for elevator, bus, metro or other public occasions, block views from the left and right side, protect your privacy from people nearby.
This privacy screen iPhone 12 / iPhone 12 Pro made of tempered glass, effectively protect your phone's screen from cracking, but not totally fit some cases friendly, which edges cover the phone's screen.
Bubble-Free adhesive makes the privacy screen easy to install, removing dust firstly, then aligning it properly position. You can remove and reinstall the iPhone 12 / iPhone 12 Pro screen protector during installation process.
This privacy screen featured by high touch sensitivity and anti-fingerprint, won't affect your Face ID recognition.
Protective Film only (iPhone not included)
HD Screen Protector Prevents Fingerprint Boundary Radian High Hardness Protective Film for iPhone 12 Pro / 12 $5.99
HC F03 HD Screen Prevents Fingerprint Boundary Radian High Hardness Protective Film is suitable for iPhone 12 Pro / iPhone 12.
This iPhone 12 Pro glass screen protector made of super hard shatterproof sapphire glass, adopts undergoes an ion exchange tempering process, Its hardness has far exceeded the other screen protector on the market. Your screen is certified to survive even if it falls from a height of 6Ft (1.8 meters) to a hard ground. Not afraid of any challenge, give your phone screen a double security