I received Ehpro 2in1 kit from buybest.com for the purpose of this review.
Ehpro 2in1 kit comes in few different colors:
- Orange black
- Gun black
- Yellow black
- Red black
Specification:
Fusion MOD
- Size: 84 x 41.5 x 41.8mm
- Material: Zinc Alloy
- Battery: 2 x 18650 Batteries (Not Included)
- Buttons: Fire Button / 2x "+ Buttons" / 2x "- Buttons"
- Thread: Spring Dual 510 Threading (Still Compatible with Single 510 Threading)
- Resistance Range: 0.06–3.0ohm
- Output Voltage: 0.5–8V
- Temperature Control: 200-600?/100-300?
- Power Range: Dual Way up to 100W (Each)/Single Way up to 150W
Fusion Tank
- Size: 25 x 55.7 mm (w/o thread)
- Material: Glass/Stainless Steel
- Dual E-Liquid Reservoirs (2.0ml Capacity Each)
- Thread: Dual 510 Thread
In the box:
- Fusion rdta
- Fusion mod
- Usb cable
- Spare parts
- 510 pin
- Two coils
- Spare glass
- User manual
Ehpo fusion 2in1 kit is one very interesting and unique kit. For this kit we can say that it is innovative kit, because this mod has two chips and rdta has two separate tanks, so with this kit you can use 2 different e liquids in the same time and you can control each coil separately with the mod, you can change the power on each coil or you can use different coils for each tank or you can just use one coil at the time.
Fusion rdta
Fusion rdta is very interesting atomizer, you can use two different e liquids with this rdta in combination with this mod. You can use fusion rdta in single coil configuration or dual coil configuration. In the package you will receive regular 510 pin so you will be able to use fusion rdta with regular mods, but in that case you won't be able to control the coils separately, but you will use rdta as regular single or dual coil rdta. Build quality is good, so far I didn't see any problem about quality.
Drip tip and top cap:
Fusion rdta comes with 810 drip tip pre installed, drip tip stands very nice in the place and this is pretty much comfortable drip tip for using. You can use any other 810 drip tip on this rdta. In case that you like to use 510 drip tips you can use 510 drip tips here, because in the package you will receive 510 drip tip adapter.
Top cap on this rdta is made out of plastic and stainless steel and you can take off the plastic piece from the stainless steel piece, actually you need to unscrew the plastic piece. Airflow that hits the coils from the sides you can adjust by spining the top cap and I would like that they added here some engravings on the top cap, it's not hard to adjust it but still I would like some engravings here.
Chamber:
On the chamber you can see 6 slots for airflow. You can see two slots on each side that you will use when you want to use rdta in dual coil configuration and you can see two slots that you will use if you use this rdta in single coil configuration. Bottom airflow slot is placed that way that air from that slot will go under the coil and top slot is placed that way that air from the top slot will hit the coil from the side. You can use only bottom airflow slot if you want to and that way airflow will only hit the coil from the bottom or you can use top and bottom airflow. As I already said you can adjust the airflow that hits the coil from the side by turning the top cap and to adjust the airflow that hits the coil from the bottom you need to spin the chamber. You can adjust airflow very easy by spining the chamber and there is no any stopper here, which can be a con to someone.
Base:
On the base you can see 4 slots for coil leads, so placing the coils here is very easy. Under each coil you can see one airflow slot, through that slots air will hit the coils from the bottom slots on the chamber. Also on the base you can see 4 wicking slots, or 2 wicking slots for each coil.
Under the base you can see two slots, one slot on each side, that slots you will use to fill the tank, so each slot for each tank. Slots for e liquid are big and I didn't have any problem with filling the tanks, for example with gorilla tips it is perfect. Between the base and the piece where slots for e liquid are placed you can see one ring that you can uscrew in order to take off the tank and clean the atomizer.
Tank is separated on two smaller tanks and each coil has own tank, so with this rdta you can use different e liquids in each tank, each tank has 2ml capacity. In the package you will receive one spare glass tank which is the same as this one.
Under the tank you can see engraved "up" and "down", coil that you can see on the side where is engraved "up" you can control on the top part of the screen on the mod and the coil that you can see on the side where is "down" you can control on the bottom side of the screen on the mod.
Using the fusion rdta:
Fusion rdta is very interesting rdta because you can use two different coils with different e liquids and still you can use it in single or dual coil configuration on this mod, also in the package you will receive regular 510 pin and you can use it in signle or dual coil configuration on any other regular mod. I would like that they added some engraving on the top cap to make airflow adjustment even easier, but basically you can very easy adjust the airflow, bottom airflow you can adjust even easier by turning the chamber.
Placing the coils here is very easy, you can very easy place one coil or two coils here. In the package you will receive two coils which is a big plus. When you place your coils and put the cotton through the coils you need to place the cotton in the wicking slots and there is no reason to leave the cotton to be too long , wicking will be great. There is no leaking, chamber covers the slots for e liquid and you should not be worried about leaking if you wick this rdta properly. Vapor production is good. Flavor is not bad at all, flavor is good and I prefer to use it only with bottom airflow, in my opinion that way flavor is the best on this rdta and I must say, I like to vape different e liquids in this atomizer, I can try different combinations directly in the rdta.
Cons:
- I would like some engravings on the top cap
- There is no stopper on the chamber (I know to someone it can be a con), but here this is not actually a con because without stopper you can easy spin the chamber for single coil airflow
Pros:
- You can use two different coils
- You can use different e liquids
- Good airflow and there is a lot of airflow when slots are open
- No leaking
- Easy to build
- Good flavor
- Two coils in the package
- 510 drip tip adapter
- Regular 510 pin so you can use the rdta with regular mods
Ehpro 2in1 kit comes in few different colors:
- Orange black
- Gun black
- Yellow black
- Red black
Specification:
Fusion MOD
- Size: 84 x 41.5 x 41.8mm
- Material: Zinc Alloy
- Battery: 2 x 18650 Batteries (Not Included)
- Buttons: Fire Button / 2x "+ Buttons" / 2x "- Buttons"
- Thread: Spring Dual 510 Threading (Still Compatible with Single 510 Threading)
- Resistance Range: 0.06–3.0ohm
- Output Voltage: 0.5–8V
- Temperature Control: 200-600?/100-300?
- Power Range: Dual Way up to 100W (Each)/Single Way up to 150W
Fusion Tank
- Size: 25 x 55.7 mm (w/o thread)
- Material: Glass/Stainless Steel
- Dual E-Liquid Reservoirs (2.0ml Capacity Each)
- Thread: Dual 510 Thread
In the box:
- Fusion rdta
- Fusion mod
- Usb cable
- Spare parts
- 510 pin
- Two coils
- Spare glass
- User manual
Ehpo fusion 2in1 kit is one very interesting and unique kit. For this kit we can say that it is innovative kit, because this mod has two chips and rdta has two separate tanks, so with this kit you can use 2 different e liquids in the same time and you can control each coil separately with the mod, you can change the power on each coil or you can use different coils for each tank or you can just use one coil at the time.
Fusion rdta
Fusion rdta is very interesting atomizer, you can use two different e liquids with this rdta in combination with this mod. You can use fusion rdta in single coil configuration or dual coil configuration. In the package you will receive regular 510 pin so you will be able to use fusion rdta with regular mods, but in that case you won't be able to control the coils separately, but you will use rdta as regular single or dual coil rdta. Build quality is good, so far I didn't see any problem about quality.
Drip tip and top cap:
Fusion rdta comes with 810 drip tip pre installed, drip tip stands very nice in the place and this is pretty much comfortable drip tip for using. You can use any other 810 drip tip on this rdta. In case that you like to use 510 drip tips you can use 510 drip tips here, because in the package you will receive 510 drip tip adapter.
Top cap on this rdta is made out of plastic and stainless steel and you can take off the plastic piece from the stainless steel piece, actually you need to unscrew the plastic piece. Airflow that hits the coils from the sides you can adjust by spining the top cap and I would like that they added here some engravings on the top cap, it's not hard to adjust it but still I would like some engravings here.
Chamber:
On the chamber you can see 6 slots for airflow. You can see two slots on each side that you will use when you want to use rdta in dual coil configuration and you can see two slots that you will use if you use this rdta in single coil configuration. Bottom airflow slot is placed that way that air from that slot will go under the coil and top slot is placed that way that air from the top slot will hit the coil from the side. You can use only bottom airflow slot if you want to and that way airflow will only hit the coil from the bottom or you can use top and bottom airflow. As I already said you can adjust the airflow that hits the coil from the side by turning the top cap and to adjust the airflow that hits the coil from the bottom you need to spin the chamber. You can adjust airflow very easy by spining the chamber and there is no any stopper here, which can be a con to someone.
Base:
On the base you can see 4 slots for coil leads, so placing the coils here is very easy. Under each coil you can see one airflow slot, through that slots air will hit the coils from the bottom slots on the chamber. Also on the base you can see 4 wicking slots, or 2 wicking slots for each coil.
Under the base you can see two slots, one slot on each side, that slots you will use to fill the tank, so each slot for each tank. Slots for e liquid are big and I didn't have any problem with filling the tanks, for example with gorilla tips it is perfect. Between the base and the piece where slots for e liquid are placed you can see one ring that you can uscrew in order to take off the tank and clean the atomizer.
Tank is separated on two smaller tanks and each coil has own tank, so with this rdta you can use different e liquids in each tank, each tank has 2ml capacity. In the package you will receive one spare glass tank which is the same as this one.
Under the tank you can see engraved "up" and "down", coil that you can see on the side where is engraved "up" you can control on the top part of the screen on the mod and the coil that you can see on the side where is "down" you can control on the bottom side of the screen on the mod.
Using the fusion rdta:
Fusion rdta is very interesting rdta because you can use two different coils with different e liquids and still you can use it in single or dual coil configuration on this mod, also in the package you will receive regular 510 pin and you can use it in signle or dual coil configuration on any other regular mod. I would like that they added some engraving on the top cap to make airflow adjustment even easier, but basically you can very easy adjust the airflow, bottom airflow you can adjust even easier by turning the chamber.
Placing the coils here is very easy, you can very easy place one coil or two coils here. In the package you will receive two coils which is a big plus. When you place your coils and put the cotton through the coils you need to place the cotton in the wicking slots and there is no reason to leave the cotton to be too long , wicking will be great. There is no leaking, chamber covers the slots for e liquid and you should not be worried about leaking if you wick this rdta properly. Vapor production is good. Flavor is not bad at all, flavor is good and I prefer to use it only with bottom airflow, in my opinion that way flavor is the best on this rdta and I must say, I like to vape different e liquids in this atomizer, I can try different combinations directly in the rdta.
Cons:
- I would like some engravings on the top cap
- There is no stopper on the chamber (I know to someone it can be a con), but here this is not actually a con because without stopper you can easy spin the chamber for single coil airflow
Pros:
- You can use two different coils
- You can use different e liquids
- Good airflow and there is a lot of airflow when slots are open
- No leaking
- Easy to build
- Good flavor
- Two coils in the package
- 510 drip tip adapter
- Regular 510 pin so you can use the rdta with regular mods