Hi Vaping Underground members, In this review i take a look at the iStick Power 2C 160W Box MOD from Eleaf. The Eleaf iStick Power 2C 160W Box MOD was supplied for the purpose of this review by Sourcemore.
Eleaf iStick Power 2C Mod 18650 160W Box Mod
Introduction
Eleaf are one of the oldest vaping manufactures and along with Wismec and Joyetech make up the Jwei Trio! They are most known for their iStick series which have different ranges including the much loved Pico, the iStick mods and here we have the follow up to the iStick Power after what must be approaching a five year gap!
As the name Power suggests the iStick power 2C is a power only device (so no TC settings) which comes with wattage, smart and voltage modes. The device is powered by dual 18650 batteries and outputs up to 160 watts although there is a lower powered in-built battery version. The main accents on the large coloured display can be customised to be one of 4 different colours and for those that need to charge in the device we have Type C and a 2A charge rate!
Eleaf products tend to be classed as budget yet are known for their reliability in both performance and durability, let's check out the iStick Power 2C in more detail!
_________________________________________________________________________
In The Box
Contents:
_________________________________________________________________________
Aesthetics and Ergonomics
The iStick Power 2C came in sturdy cardboard box packaging with outer cardboard sleeve which has a raised picture of the chosen colour on the front and contents, information etc on the reverse! I received the Blue version which has a large upper Blue leather spine section and smaller Brown Leather lower spine section, the options are Light Brown, Blue, Red, Dark Brown or Black. Apart from the Black which has both upper and lower Black leather spine sections all other colours have a different colour lower spine section to the upper section which is the colour of choice!
The device is constructed from Zinc Alloy and has a classic C frame design with curved frontage and bevelled edging leaving zero sharp edges! The spine sections which wrap around to cover most of the sides are well padded and despite the spine not being particularly curved it's comfortable in the hand. The device feels pretty much a medium weight so definitely can't be described as lightweight but not particularly heavy either. The two leather sections have stitching which adds aesthetic detail and on the frame one side we have "eleaf " and on the other side "iPower" both of which are in a signature looking font, on the side which has "eleaf" printed below in a vertical position we have the Type C USB connector!
The face of the device has a large, proud protruding curved fire button towards the top with a large colour display below. Below the screen we again have a proud, large horizontally positioned navigational rocker. Up top set to the rear we have a small air fed plate with Gold plated, spring loaded 510. Moving to the base we have the hatch battery door with safety stamps and 3 venting holes.
Although Eleaf devices are still budget priced over the last couple of years the build quality has improved considerably and the iStick Power 2C is a very solid, well made device and aesthetically pleasing to the eye in my opinion!
_________________________________________________________________________
iStick Power 2
Just worth mentioning as well as the dual 18650 iStick Power 2C which has a max wattage of 160w there is also the iStick Power 2 which has a 5000mAh in-built battery and top wattage of 80w. Apart from the inbuilt battery and lower top wattage the two devices are operated exactly the same!
_________________________________________________________________________
iStick Power 2C Specs and Features:
Dimensions: 52.8mm X 25mm X 86.5mm
Materials: Zinc Alloy, Leather
Battery Type: Dual 18650 (Not included)
Output Wattage: 1-160W
Output Wattage: 1-8V
Resistance range: 0.1-3.0Ω
Screen: 0.96”color display
Charging Current: 5V/2A (USB-C)
Smart Avatar chip: WATTAGE/SMART/VOLTAGE modes
Four different Colour Display Options
Thread: 510
Colours: Light Brown, Blue, Red, Dark, Brown, Black
_________________________________________________________________________
Fitting The Batteries
The iStick Power 2C accommodates dual 18650 batteries that get fitted via the hatch door on the base of the device, just slide the door forward and lift up, we also have 3 venting holes. Orientation is vibrantly labelled at the bottom of the tubes and also embossed on the contacts underneath the hatch door where we can also see the batteries labelled A & B in bright White!
When the door is secured we have no movement or battery rattle whatsoever, i know over time some people have experienced this type of battery hatch door opening during use but only time will tell, certainly during my testing it was absolutely fine.
Although i would always recommend charging in an external charger if you do need to charge in the device i am pleased the Power 2C has a Type C USB connector and 2A charge rate. During internal charging a progress bar is shown for each battery and the charge given for each one as a percentage, the device supports both pass-through and firmware upgrades!
Note: On the above picture only one charging progress bar is shown as it is the Power 2 and not Power 2C version!
_________________________________________________________________________
Display
The iStick Power 2C has a large colour display with nice layout and everything can be easily read, it can also be changed in appearance with a choice of 4 different colours for the main display accents!
At the top starting from the left we have the 2 (one for each battery) battery status bars labelled A & B, to the right of the status bars we have a padlock which will be in either an open or locked position depending on status.
Next we have the wattage or voltage depending which mode you are in, underneath the wattage or voltage we have a wavelength graphic which is animated when firing but is just for aesthetics and doesn't actually relate to anything but kind of cool if you like that sort of thing! This is followed by the mode and then underneath the resistance and finally at the bottom your puff information, to the left your count and to the right the duration of your puff!
_________________________________________________________________________
Review Continued Below:
Eleaf iStick Power 2C Mod 18650 160W Box Mod
Introduction
Eleaf are one of the oldest vaping manufactures and along with Wismec and Joyetech make up the Jwei Trio! They are most known for their iStick series which have different ranges including the much loved Pico, the iStick mods and here we have the follow up to the iStick Power after what must be approaching a five year gap!
As the name Power suggests the iStick power 2C is a power only device (so no TC settings) which comes with wattage, smart and voltage modes. The device is powered by dual 18650 batteries and outputs up to 160 watts although there is a lower powered in-built battery version. The main accents on the large coloured display can be customised to be one of 4 different colours and for those that need to charge in the device we have Type C and a 2A charge rate!
Eleaf products tend to be classed as budget yet are known for their reliability in both performance and durability, let's check out the iStick Power 2C in more detail!
_________________________________________________________________________
In The Box
Contents:
- 1 x iStick Power 2C Mod
- 1 x Type-C Cable
- 1 x User Manual
- 1 x Warranty Card
_________________________________________________________________________
Aesthetics and Ergonomics
The iStick Power 2C came in sturdy cardboard box packaging with outer cardboard sleeve which has a raised picture of the chosen colour on the front and contents, information etc on the reverse! I received the Blue version which has a large upper Blue leather spine section and smaller Brown Leather lower spine section, the options are Light Brown, Blue, Red, Dark Brown or Black. Apart from the Black which has both upper and lower Black leather spine sections all other colours have a different colour lower spine section to the upper section which is the colour of choice!
The device is constructed from Zinc Alloy and has a classic C frame design with curved frontage and bevelled edging leaving zero sharp edges! The spine sections which wrap around to cover most of the sides are well padded and despite the spine not being particularly curved it's comfortable in the hand. The device feels pretty much a medium weight so definitely can't be described as lightweight but not particularly heavy either. The two leather sections have stitching which adds aesthetic detail and on the frame one side we have "eleaf " and on the other side "iPower" both of which are in a signature looking font, on the side which has "eleaf" printed below in a vertical position we have the Type C USB connector!
The face of the device has a large, proud protruding curved fire button towards the top with a large colour display below. Below the screen we again have a proud, large horizontally positioned navigational rocker. Up top set to the rear we have a small air fed plate with Gold plated, spring loaded 510. Moving to the base we have the hatch battery door with safety stamps and 3 venting holes.
Although Eleaf devices are still budget priced over the last couple of years the build quality has improved considerably and the iStick Power 2C is a very solid, well made device and aesthetically pleasing to the eye in my opinion!
_________________________________________________________________________
iStick Power 2
Just worth mentioning as well as the dual 18650 iStick Power 2C which has a max wattage of 160w there is also the iStick Power 2 which has a 5000mAh in-built battery and top wattage of 80w. Apart from the inbuilt battery and lower top wattage the two devices are operated exactly the same!
_________________________________________________________________________
iStick Power 2C Specs and Features:
Dimensions: 52.8mm X 25mm X 86.5mm
Materials: Zinc Alloy, Leather
Battery Type: Dual 18650 (Not included)
Output Wattage: 1-160W
Output Wattage: 1-8V
Resistance range: 0.1-3.0Ω
Screen: 0.96”color display
Charging Current: 5V/2A (USB-C)
Smart Avatar chip: WATTAGE/SMART/VOLTAGE modes
Four different Colour Display Options
Thread: 510
Colours: Light Brown, Blue, Red, Dark, Brown, Black
_________________________________________________________________________
Fitting The Batteries
The iStick Power 2C accommodates dual 18650 batteries that get fitted via the hatch door on the base of the device, just slide the door forward and lift up, we also have 3 venting holes. Orientation is vibrantly labelled at the bottom of the tubes and also embossed on the contacts underneath the hatch door where we can also see the batteries labelled A & B in bright White!
When the door is secured we have no movement or battery rattle whatsoever, i know over time some people have experienced this type of battery hatch door opening during use but only time will tell, certainly during my testing it was absolutely fine.
Although i would always recommend charging in an external charger if you do need to charge in the device i am pleased the Power 2C has a Type C USB connector and 2A charge rate. During internal charging a progress bar is shown for each battery and the charge given for each one as a percentage, the device supports both pass-through and firmware upgrades!
Note: On the above picture only one charging progress bar is shown as it is the Power 2 and not Power 2C version!
_________________________________________________________________________
Display
The iStick Power 2C has a large colour display with nice layout and everything can be easily read, it can also be changed in appearance with a choice of 4 different colours for the main display accents!
At the top starting from the left we have the 2 (one for each battery) battery status bars labelled A & B, to the right of the status bars we have a padlock which will be in either an open or locked position depending on status.
Next we have the wattage or voltage depending which mode you are in, underneath the wattage or voltage we have a wavelength graphic which is animated when firing but is just for aesthetics and doesn't actually relate to anything but kind of cool if you like that sort of thing! This is followed by the mode and then underneath the resistance and finally at the bottom your puff information, to the left your count and to the right the duration of your puff!
_________________________________________________________________________
Review Continued Below:
Last edited: