Become a Patron!

[[ENDED]] Pre-Launch Coil Giveaway!!! Ends 2/15/2016

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Which ones do you think would work on a velocity dripper or better yet on the aromamizer with velocity deck?
Just about anything on the website will fit in the Velocity. For the Aromamizer, I can always make you something special. It's fairly limited on what you can fit in it. A smaller gauge fused Clapton setup works well in it.
 

doc_iguana

VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
thanks!

signed up for newsletter

site seems pretty easy to navigate - possibly add a rewards/ referral program to encourage folks to share the love
really nice looking coil work

would love to try out the
PARALLEL FLATTENED ALIEN / MULTI-STRAND STAGING WIRE and the
STITCHED FRAMED ALIEN STAPLE COILS - either would rock in the CompVape Double Vision RDA

also interested in the Framed Alien Staple Coils and the Framed Staple Coils

again - beautiful work
 

doc_iguana

VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
Chef - you mentioned three entries per day - do we need to post coil prefs for each entry?
 

Scooter 72

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I hope I get a chance to win I've really wanted to try the alien wire coils

have a nice day
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Chef - you mentioned three entries per day - do we need to post coil prefs for each entry?
Nope! :D

possibly add a rewards/ referral program
I was thinking about doing that - now that I know there could be an interest, I've put it on my "To-Do" list. I'm also planning on adding an affiliate program.

@Scooter 72 You get 25% off using code VU25 from now until the Grand Opening on 2/15.
 

Scooter 72

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I've tryed the stitched a few times. It worked out But nothing and I mean nothing close to as nice as that

have a nice day
 

Manimal3497

Manimalizer
Gold Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
@CrazyChef How would I go about putting in a special order for the basic claptons? Should I just order a pair and put in the comments what i am looking for? Basically I vape .2-.5ohm dual in the aromamizer. I normally put 9 wrap 2.5mm 24 gauge in them and they seem to fit so would leave the details up to you as to what wire adn all that if that is ok.
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
How would I go about putting in a special order for the basic claptons?
Sure, just put it in the comments and I'll confirm everything with you before I make them to ensure sure it's what you want.
 

mac63

Diamond Contributor
Member For 5 Years
2/4
#2

So is there anything special we need to do for the daily entries?



Alien coils at .5 ohm
 

Vapingbeauty

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
I was going to add it, but I have an open dispute with PayPal from an eBay business that I had 10 years ago. Yes - 10 YEARS. PayPal is a VERY controlling company if you're a seller, and can make up pretty much any rule they want to keep your money as long as they can.
#1
Definitely I would prefer to pay with paypal....as a consumer I feel they have done well by me when I have gotten screwed

Sent from my SM-N910V using Tapatalk
 
Last edited:

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
So is there anything special we need to do for the daily entries?
Cross your fingers? :D:p

Just make sure that you sign up for the newsletter and post which coils (from the website) that you want in at least one of your posts.
 

Vapingbeauty

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
#2
Maybe a link to the site in the 1st post of this thread

Sent from my SM-N910V using Tapatalk
 
Last edited:

mac63

Diamond Contributor
Member For 5 Years
Cross your fingers? :D:p

Just make sure that you sign up for the newsletter and post which coils (from the website) that you want in at least one of your posts.

2/4
#3

Got those done.
If I cross any more body parts I'm gonna end up a pretzel:D
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Awesome stuff Chef, glad to hear the local coil artists are putting their talent out there. If I win I'd love just a well done Fused clapton, I love mine, but I know you guys make them better so I'd love to compare.
 
Last edited:

Manimal3497

Manimalizer
Gold Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
sweet well count this as post #2 and I am gonna say basic clapton because that is what I am going over to buy now :)
 

doc_iguana

VU Donator
Silver Contributor
Member For 4 Years
Member For 3 Years
ECF Refugee
#2

would love to win some, but either way, i know where my next coil order is going, lol - really impressed with the quality of work... fused claptons is about the extent of my ability, been spinning some SS claptons recently
 

markfm

Bronze Contributor
Member For 4 Years
Put the Shipping info in its own block, rather than in the About section. Your prices are reasonable, competitive, make it easy for people to see that.
 

hogheadv

Bronze Contributor
Member For 4 Years
The packaging that these coils are shipped in is extremely professionally done.
 
Last edited:

Scooter 72

Platinum Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
You guys are really getting the word out I've been seeing you alot today

have a nice day
 

mac63

Diamond Contributor
Member For 5 Years
2/5
#1

Would love to try some of these coils - have only wrapped/used fairly basic ones so far.
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Was browsing the site again, and one thought, if you can put dimensions of the coils that could be helpful. You put the building specs, but say I buy some fused claptons hearing so much about the, and expect to put them on a deck that has small post holes that don't end up fitting them. Likewise length of the coil, and hell width might be nice to know as well. But mainly the diameter of the wire and the length of the coil would be helpful. I'm sure a couple people are rolling their eyes at me right now, I just know I've been bitten by things that just don't fit before, not just specifically to vaping but in general. There's a reason I actually own calipers and a half dozen measuring tapes/rulers and even a quality plumb bob. Measure twice cut once and all.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Was browsing the site again, and one thought, if you can put dimensions of the coils that could be helpful. You put the building specs, but say I buy some fused claptons hearing so much about the, and expect to put them on a deck that has small post holes that don't end up fitting them. Likewise length of the coil, and hell width might be nice to know as well. But mainly the diameter of the wire and the length of the coil would be helpful. I'm sure a couple people are rolling their eyes at me right now, I just know I've been bitten by things that just don't fit before, not just specifically to vaping but in general. There's a reason I actually own calipers and a half dozen measuring tapes/rulers and even a quality plumb bob. Measure twice cut once and all.
Could always ask or inform him what RDA/RTA they would be going in instead if they are unsure...Sizes can vary and when they are installed those specs can easily changed. Maybe a Tip or Notice on the pages for these coils to ask if unsure about their RDA/RTA fitment.
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Could always ask or inform him what RDA/RTA they would be going in instead if they are unsure...Sizes can vary and when they are installed those specs can easily changed. Maybe a Tip or Notice on the pages for these coils to ask if unsure about their RDA/RTA fitment.
Yeah that'd work too.
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
if you can put dimensions of the coils that could be helpful.
That's actually on my TO-DO list. Right now, all of the aliens, fused Claptons, Claptons, etc. will fit almost any current RDA that is on the market. Older models (like the Patriot, which I have) can be a problem with the larger coils, and I'll make a note of that.

What RDA are you using?
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
That's actually on my TO-DO list. Right now, all of the aliens, fused Claptons, Claptons, etc. will fit almost any current RDA that is on the market. Older models (like the Patriot, which I have) can be a problem with the larger coils, and I'll make a note of that.

What RDA are you using?
I use the Haze and Avocado Genesis style RTAs mostly. I'm not really worried for myself, just something I noticed and you said you wanted feedback. I'm paranoid enough that I'd have contacted you if I was worried (Avocado is a pretty large deck with velocity style, the topcap kinda sucks because it cuts off about a mm of potential space though).
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
and you said you wanted feedback
Absolutely! :D

Also, I need NEGATIVE feedback as well. If something isn't working for anyone on the website, let me know, and let me know why you don't like it.
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
One other thing, I noticed at the bottom there is a "collections" link, clicking it you get to https://www.purecoils.com/collections, where "jewelry" is listed... so are you selling that starfleet badge? :p Anyways, I'd let you know if I saw anything wrong, but nothing pops out to me. If you wanted me to pull stuff out of my ass I could, but really it looks great.

If there were anything I thought it was weird that I could sign up with the newsletter without creating an account. I can "manage preferences" but either I did something wrong or you don't actually create an account doing that. Not a big deal as you'll make an account the first order or you can just make an account just a little quirk if I were to look for something to comment on.
 

Roadtrip635

Gold Contributor
Member For 4 Years
2/5 #1
I was checking out your instagram and those fused claptons on that Crius looked awesome! I have a Crius, but also just got my Griffin a few days ago and a pair of those fused claptons would look so sexy on it.
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I could sign up with the newsletter without creating an account.
Yeah, I don't feel that I should force people to go through the hassle of creating an account if all they want is the newsletter for now. When you create an account though, you are automatically signed up for it. There is a checkbox to opt out in the account sign up if you don't want to get the newsletter.
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
I dont have Social Media Outlets so I dont view them very often, I just looked through your collection Chef and some of them are pretty mind blowing, others inspire me to want to try them or variants of them....
The Twisted builds are what intrigue me :)


Days without wire is like days waiting for Tax Returns...I am dealing with both here and its pretty depressing :mad::confused::(
 

CrazyChef

Custom Hand Crafted Coils - PureCoils.com
VU Vendor
VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Thank you, @raymo2u !

Yeah, I keep checking my tax return, also.
Waiting... waiting... waiting... waiting... waiting...
 

raymo2u

VU Donator
Platinum Contributor
Member For 4 Years
Unlisted Vendor
Thank you, @raymo2u !

Yeah, I keep checking my tax return, also.
Waiting... waiting... waiting... waiting... waiting...
Since they were Accepted on the 18th, still not approved and others that sent them in less then a week ago already have their money back...This is what get me anxious...Damn near 9 grand dangling with no way to rush'em...:confused:
Oh well anyways...
I cant wait to see what you come up with in the near future!
 

JERUS

Gold Contributor
Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Yeah, I don't feel that I should force people to go through the hassle of creating an account if all they want is the newsletter for now. When you create an account though, you are automatically signed up for it. There is a checkbox to opt out in the account sign up if you don't want to get the newsletter.
great point considering when I was looking around the website earlier I clicked log in and realized what I said, then went "ahh screw it I'll sign up for an account later" :D
 

VU Sponsors

Top