I have to say I was excited about receiving the Wismec Luxotic 250w. I have the OG Noisy Cricket and the Noisy Cricket 2. So I really wanted to see the 250w version. I was not disappointed. Yes, it is not perfect. But it is pretty darn close.
I got a green resin version with the guillotine on top and nice green resin drip tip. Now the RDA was okay. It can be used for a squonker with it's bf pin - nice bonus. It is a two post and easy to build. It has a nice beauty ring to match the mod. Overall not bad. I built a .2 ohm coil so I could use in single coil mode as either series or parallel. There flavour was okay. The build quality is decent. But it is not a Goon or a Twisted 24. I think it will be my squonk RDA for sure.
Now the mod … I like it a lot. The resin panels have some play. But it is not a deal breaker. I took the Guillotine off and put a single Goon on top and the drip tip fit perfectly from the Guillotine. Now this is a PWM like the Noisy Cricket 2. With a .19 build I got a nice vape using either parallel or series. Excellent.
The mod has the obligatory protections - temperature, low voltage, short circuit … you get it. It is a five click on/off. On the top of there mod is a toggle switch to change from series to parallel. Much better than the Noisy /Cricket 2. The bottom plate removes to put the batteries in and is clearly marked for battery orientation. I’m using 20700 but you have adapters for 18650.
The mod and RDA look a lot more expensive than 70 US. It has a high end feel to it. I was a big fan of the Noisy Cricket 2. This is going to enter my rotation for sure.
Wismec Luxotic NC 250W Box Mod Features:
• Dimensions - 96.2mm by 54.5mm by 26.6mm
• Dual High-Amp 20700 Batteries - Not Included
• Optional Dual High-Amp 18650 Batteries
• Maximum Wattage Output: 250W
• Voltage Output Range: 1.3-5.3V
• Two Output Mode - Series & Parallel
• PCB Circuit Board
• Adjustable Voltage Controller
• Single Button Operation - Firing Mechanism
• Bottom-Loaded Sliding Battery Door
• Short Circuit Protection
• Low Voltage Protection
• Temperature Protection
• Atomizer Protection
• 510 Connection
Wismec Guillotine V2 RDA Features:
• 24mm Base Diameter
• Optional 25.5mm Ring Base
• 6mm Deep Juice Well
• Superior Stainless Steel Construction
• Horizontal Two-Post Build Deck
• Top Secured via Hex Screws
• Single or Dual Coil Configuration
• Dual Slotted Airflow Control - Side or Bottom
• 810 Resin Widebore Drip Tip
• Optional 810 ULTEM Drip Tip
• Squonk-Ready Bottom-Feeding 510 Pin
• Spring-Loaded 510 Contact Pin
Includes:
• 1 Luxotic NC Box Mod
• 1 Guillotine V2 RDA
• 2 0.28ohm Clapton Prebuilt Coils
• 2 18650 Battery Sleeve
• 1 ULTEM Drip Tip
• Spare Parts
• Instructional Manuals
So would I recommend this device? Absolutely. If you like the Noisy Cricket 2 you will love this. Maybe the resin is not for everyone (I like it). The mod is not tiny - well it is dual 20700 so … the upside is I got 6 hours of vaping with those dual 20700s. Overall Wismec did a really nice job with this. As soon as you get the kit you install their coils and get going.
I got a green resin version with the guillotine on top and nice green resin drip tip. Now the RDA was okay. It can be used for a squonker with it's bf pin - nice bonus. It is a two post and easy to build. It has a nice beauty ring to match the mod. Overall not bad. I built a .2 ohm coil so I could use in single coil mode as either series or parallel. There flavour was okay. The build quality is decent. But it is not a Goon or a Twisted 24. I think it will be my squonk RDA for sure.
Now the mod … I like it a lot. The resin panels have some play. But it is not a deal breaker. I took the Guillotine off and put a single Goon on top and the drip tip fit perfectly from the Guillotine. Now this is a PWM like the Noisy Cricket 2. With a .19 build I got a nice vape using either parallel or series. Excellent.
The mod has the obligatory protections - temperature, low voltage, short circuit … you get it. It is a five click on/off. On the top of there mod is a toggle switch to change from series to parallel. Much better than the Noisy /Cricket 2. The bottom plate removes to put the batteries in and is clearly marked for battery orientation. I’m using 20700 but you have adapters for 18650.
The mod and RDA look a lot more expensive than 70 US. It has a high end feel to it. I was a big fan of the Noisy Cricket 2. This is going to enter my rotation for sure.
Wismec Luxotic NC 250W Box Mod Features:
• Dimensions - 96.2mm by 54.5mm by 26.6mm
• Dual High-Amp 20700 Batteries - Not Included
• Optional Dual High-Amp 18650 Batteries
• Maximum Wattage Output: 250W
• Voltage Output Range: 1.3-5.3V
• Two Output Mode - Series & Parallel
• PCB Circuit Board
• Adjustable Voltage Controller
• Single Button Operation - Firing Mechanism
• Bottom-Loaded Sliding Battery Door
• Short Circuit Protection
• Low Voltage Protection
• Temperature Protection
• Atomizer Protection
• 510 Connection
Wismec Guillotine V2 RDA Features:
• 24mm Base Diameter
• Optional 25.5mm Ring Base
• 6mm Deep Juice Well
• Superior Stainless Steel Construction
• Horizontal Two-Post Build Deck
• Top Secured via Hex Screws
• Single or Dual Coil Configuration
• Dual Slotted Airflow Control - Side or Bottom
• 810 Resin Widebore Drip Tip
• Optional 810 ULTEM Drip Tip
• Squonk-Ready Bottom-Feeding 510 Pin
• Spring-Loaded 510 Contact Pin
Includes:
• 1 Luxotic NC Box Mod
• 1 Guillotine V2 RDA
• 2 0.28ohm Clapton Prebuilt Coils
• 2 18650 Battery Sleeve
• 1 ULTEM Drip Tip
• Spare Parts
• Instructional Manuals
So would I recommend this device? Absolutely. If you like the Noisy Cricket 2 you will love this. Maybe the resin is not for everyone (I like it). The mod is not tiny - well it is dual 20700 so … the upside is I got 6 hours of vaping with those dual 20700s. Overall Wismec did a really nice job with this. As soon as you get the kit you install their coils and get going.
Last edited: