I received Aegis solo from Geekvape for the purpose of this review.
Aegis solo colors:
- Orange
- Blue
- Black
- Green
- Red
- Gunmetal
Specification:
- Height: 128.9mm
- Width: 41.2mm
- Depth: 31.5mm
- Atomizer capacity: 5.5ml / 4ml / 2ml
- Atomizer diameter: 25mm
In the box:
- Aegis solo mod
- Spare parts
- Super mesh x2 coil
- Spare regular glass tube 4ml / 2ml
- Cerberus tank with x2 mesh coil and bubble glass tank
- Battery door assist tool
- Usb cable
- User manual
Cerberus sub ohm tank:
I received Cerberus in black color and atomizer was very clean and without any smells, I always like to see clean atomizer. Build quality is very good as expected, threads are nice and clean. Color quality is good as well, so far everything is good.
Height of this tank is 46.8mm, diameter is 25mm. You can see really nice details on the top cap and on the airflow control ring and details helps when you want to fill the tank or to adjust airflow. On the top cap you can also see engraved "Cerberus" and from the bottom of the tank you can see engraved "Designed by Geekvape". In my opinion cerberus looks very nice with mod from the package.
On the top of cerberus you can see 810 drip tip without o ring, but there is o ring in the top cap and that ring holds drip tip nice in the place. You can also use here other 810 drip tips without o ring, most of my drip tips looks good here.
Drip tip that comes with cerberus is very short, I like short drip tips and this one is very comfortable for me.
This is a top fill tank and you can fill this tank very easy in few seconds. All you need to do to fill this tank is a half a turn on the top cap and that's it, you will see filling holes. On the top cap you can see two notches that locks the top cap, very good top fill system.
Cerberus comes with bubble tank pre installed, but in the package you will receive one extra regular glass tank. I like to use atomizers with bubble tank, it looks better in my opinion, so I like to use bubble glass here. Diameter of bubble tank is 27mm. Regular glass tank capacity is 4ml, but with bubble glass tank capacity is 5.5ml, also you can buy 2ml version.
You can also see here o ring that holds the glass tank in place very good.
In the package you will receive 2 coils, one coil is pre installed and other one is a spare coil. Both coils are the same, mesh x2 coils, with 0.3ohm resistance. You can use this coil from 30-45w, but you can see engraved on the coil that this coil works best from 30-40watts. Cerberus tank is compatible with other coils as well, you can use here coils from smok tfv8 baby, smok tfv12 baby, aero tank, shield tank, procore and many more. So, I would say that this is a big plus.
I like to mention that always when you use the coil for the first time you need to prime it with few drops of e liquid, because after that you only need to fill the tank and you can vape right away without any problems.
You can see on this coil 4 wicking holes, wicking is very good with my e liquid, I use 70-30 vg pg, when I chain vape everything is good as well.
On the base you can see the airflow control ring and on the ring you can see two big airflow holes. We have stopper here which is always good. What you adjust on one side it will be same on the another side. You can very easy adjust airflow, the ring has nice tension on it and details on the airflow ring helps a lot.
How this atomizer works and my thoughts:
Build quality of this atomizer is very good, very nice machining, color is also good. Drip tip from the package is very comfortable for me for using but it would be nice that they included one more drip tip. You can fill the tank very easy and without any problems, there is no leaking when you will the tank which is good. With this atomizer you will receive the bubble glass tank, this tank has 5.5 ml capacity and capacity is great for this atomizer. I really like blue o rings because with blue o rings atomizer looks perfect on the mod.
Vapor production is great and flavor is very good with mesh coils from the package, I really like that they included 0.3ohm coils in the package because resistance is good for the mod with single 18650 battery. Also it is very nice that you can use some different coils on this atomizer. If you ask me cerberus is well built tank and with mesh coils it performs great.
Cons:
- One more drip tip would be nice
Pros:
- Build qualtiy is good
- Bubble glass tank with 5.5ml capacity
- Color is good
- I really like preinstalled drip tip
- 0.3ohm coils
- Two coils in the package
- No leaking
- Good flavor
Aegis solo colors:
- Orange
- Blue
- Black
- Green
- Red
- Gunmetal
Specification:
- Height: 128.9mm
- Width: 41.2mm
- Depth: 31.5mm
- Atomizer capacity: 5.5ml / 4ml / 2ml
- Atomizer diameter: 25mm
In the box:
- Aegis solo mod
- Spare parts
- Super mesh x2 coil
- Spare regular glass tube 4ml / 2ml
- Cerberus tank with x2 mesh coil and bubble glass tank
- Battery door assist tool
- Usb cable
- User manual
Cerberus sub ohm tank:
I received Cerberus in black color and atomizer was very clean and without any smells, I always like to see clean atomizer. Build quality is very good as expected, threads are nice and clean. Color quality is good as well, so far everything is good.
Height of this tank is 46.8mm, diameter is 25mm. You can see really nice details on the top cap and on the airflow control ring and details helps when you want to fill the tank or to adjust airflow. On the top cap you can also see engraved "Cerberus" and from the bottom of the tank you can see engraved "Designed by Geekvape". In my opinion cerberus looks very nice with mod from the package.
On the top of cerberus you can see 810 drip tip without o ring, but there is o ring in the top cap and that ring holds drip tip nice in the place. You can also use here other 810 drip tips without o ring, most of my drip tips looks good here.
Drip tip that comes with cerberus is very short, I like short drip tips and this one is very comfortable for me.
This is a top fill tank and you can fill this tank very easy in few seconds. All you need to do to fill this tank is a half a turn on the top cap and that's it, you will see filling holes. On the top cap you can see two notches that locks the top cap, very good top fill system.
Cerberus comes with bubble tank pre installed, but in the package you will receive one extra regular glass tank. I like to use atomizers with bubble tank, it looks better in my opinion, so I like to use bubble glass here. Diameter of bubble tank is 27mm. Regular glass tank capacity is 4ml, but with bubble glass tank capacity is 5.5ml, also you can buy 2ml version.
You can also see here o ring that holds the glass tank in place very good.
In the package you will receive 2 coils, one coil is pre installed and other one is a spare coil. Both coils are the same, mesh x2 coils, with 0.3ohm resistance. You can use this coil from 30-45w, but you can see engraved on the coil that this coil works best from 30-40watts. Cerberus tank is compatible with other coils as well, you can use here coils from smok tfv8 baby, smok tfv12 baby, aero tank, shield tank, procore and many more. So, I would say that this is a big plus.
I like to mention that always when you use the coil for the first time you need to prime it with few drops of e liquid, because after that you only need to fill the tank and you can vape right away without any problems.
You can see on this coil 4 wicking holes, wicking is very good with my e liquid, I use 70-30 vg pg, when I chain vape everything is good as well.
On the base you can see the airflow control ring and on the ring you can see two big airflow holes. We have stopper here which is always good. What you adjust on one side it will be same on the another side. You can very easy adjust airflow, the ring has nice tension on it and details on the airflow ring helps a lot.
How this atomizer works and my thoughts:
Build quality of this atomizer is very good, very nice machining, color is also good. Drip tip from the package is very comfortable for me for using but it would be nice that they included one more drip tip. You can fill the tank very easy and without any problems, there is no leaking when you will the tank which is good. With this atomizer you will receive the bubble glass tank, this tank has 5.5 ml capacity and capacity is great for this atomizer. I really like blue o rings because with blue o rings atomizer looks perfect on the mod.
Vapor production is great and flavor is very good with mesh coils from the package, I really like that they included 0.3ohm coils in the package because resistance is good for the mod with single 18650 battery. Also it is very nice that you can use some different coils on this atomizer. If you ask me cerberus is well built tank and with mesh coils it performs great.
Cons:
- One more drip tip would be nice
Pros:
- Build qualtiy is good
- Bubble glass tank with 5.5ml capacity
- Color is good
- I really like preinstalled drip tip
- 0.3ohm coils
- Two coils in the package
- No leaking
- Good flavor
