Become a Patron!

GeekVape ammit

Bigjay1978

Member For 3 Years
Member For 2 Years
Just picked up the ammit, and so far kinda disappointed. I might have had unreasonabley high expectations, and I know I need to play with it more. I tried a alien Clapton, I think that's too much coil for this tank so I through a pre-made Clapton to try and it didn't have any flavor. I'll play around with it more this evening. Pretty sure I'll figure it out, I love tinkering!
 

cynkrzy

Old Guy with a New Trick
VU Donator
Bronze Contributor
Member For 3 Years
What kind of coil did you go with? Resistance? Wattage?

I have one on order, looking for ideas for a first setup. Was going to wrap a clapton.
 

Bigjay1978

Member For 3 Years
Member For 2 Years
Coil is a demon killer twisted quad.. 36 Ohm at 48 watts. I tried an alien Clapton first, tank just got to hot for my liking. Then I went to a demon killer Clapton at. 85 Ohm. I didn't like that at all. I pretty much knew I wouldn't though. It's pretty tasty now though. Hope you like yours!
 

Rollincoal

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
Can I get a bump to see what u guys are currently thinking about the ammit?

I just got one today for Christmas and I through a premade Clapton in, and I'm not really digging it. Having a similar lack of flavor I did with the coilart mage GTA. My juice seems to be flavorless in a single coil RTA. Never had this problem out of a dual coil RTA, don't know if it's me or if it's the tank
 

Bigjay1978

Member For 3 Years
Member For 2 Years
If your not getting much flavor, you might be using to much cotton. Play around with it. At first I couldn't taste my juice much, but vapor production was good. I re wicked using quite a bit less cotton, and I moved my coil down a bit and the flavor is crazy now. It took me l think 6 rewickings before I got it right. It's great now. I still.prefer my Griffin 25plus, but the ammit will replace my bbb as a daily driver.
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Man I pre-ordered mine from VapeNW on the 1st, they still haven't shipped ...............

O'well.

I'm curious on how it is, I also have a Merlin Mini on the way from China. The way it's looking I'll bet the Merlin before the Ammit even ships.............
 

Rollincoal

Member For 4 Years
Member For 3 Years
Member For 2 Years
Member For 1 Year
If your not getting much flavor, you might be using to much cotton. Play around with it. At first I couldn't taste my juice much, but vapor production was good. I re wicked using quite a bit less cotton, and I moved my coil down a bit and the flavor is crazy now. It took me l think 6 rewickings before I got it right. It's great now. I still.prefer my Griffin 25plus, but the ammit will replace my bbb as a daily driver.
Thanks. I'll try it again once this later today. Put a new build in it last night, 24g nichrome, 5 wraps around 2mm. Cotton just alittle tight going in. Flavor is much better, bust still doesn't come close to my bft. Should there be that much difference between a single coil and dual?
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
I remember you getting one, just curious if you had any pointers for the question(s) above.
I wish I could help. I did order a few on Black Friday from efun. Still have not received them.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

Huckleberried

VU Donator
Diamond Contributor
Member For 5 Years
VU Patreon
I wish I could help. I did order a few on Black Friday from efun. Still have not received them.

Sent from my SAMSUNG-SM-G900A using Tapatalk
Oh crap, sorry. I thought I read something about them. Must have been a different one. Thanks!
 

vapebeast92

Bronze Contributor
Member For 3 Years
Member For 2 Years
Member For 1 Year
I only have used aliens in my ammit, 28g x 3 wrapped with 36 gauge. When you install your coils try pulling them back off center closer to the side airflow, you will still get bottom airflow hitting your coil and much better flavor. I feel like in the ammit if you center your coils right over the bottom air flow the side airflow is to far from your coil to even hit it and just goes past it up your chimney. Also when i first got this thing I had big problems with wicking 70/30 and up but I figured out how to wick it just right and can chain vape 80/20 all day now. There's kind of a learning curve with this tank but once you get it all right oh man is that flavor worth it!
 

Deucesjack

VU Donator
Platinum Contributor
Member For 4 Years
ECF Refugee
Oh crap, sorry. I thought I read something about them. Must have been a different one. Thanks!
Np as soon as get it I'll spend some time with it and post a review. I'm waiting on a few more tanks as well. Thinking about doing a single coil shootout review.

Sent from my SAMSUNG-SM-G900A using Tapatalk
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
My pre-order FINALLY shipped today, should get it tomorrow or next day
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
Well I got my Ammit tonight. Put a 0.3 ohm SS fused Clapton in, Koh gen Do cotton and Vaping with a 75vg juice. No dry hits, no leaks and a very tasty Vape.

c7d5b2c4a96128a80e0f805b047224de.jpg
bb98a58df29bb238a0539e6558965606.jpg


Sent from my Nexus 6 using Tapatalk
 
Last edited:

PhantomOp

VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
Well I got my Ammit tonight. Put a 0.3 ohm SS fused Clapton in, Koh gen Do cotton and Vaping with a 75pg juice. No dry hits, no leaks and a very tasty Vape.
Sent from my Nexus 6 using Tapatalk
r055co -- Did your ammit come with the grub screws or did you replace them. Both of my ammit tanks came with phillips head screws.
 

SirRichardRear

AKA Anthony Vapes on Youtube
VU Donator
Diamond Contributor
Member For 3 Years
Reviewer
Well I got my Ammit tonight. Put a 0.3 ohm SS fused Clapton in, Koh gen Do cotton and Vaping with a 75vg juice. No dry hits, no leaks and a very tasty Vape.

c7d5b2c4a96128a80e0f805b047224de.jpg
bb98a58df29bb238a0539e6558965606.jpg


Sent from my Nexus 6 using Tapatalk
they did a great job designing the build deck on that
 

r055co

VU Donator
Platinum Contributor
Member For 4 Years
I also fixed my post, I fat fingered it. I had 75pg, corrected it to 75vg.

Anyway been vaping it through a couple of tanks, damn I'm really digging it.

Sent from my Nexus 6 using Tapatalk
 

PhantomOp

VU Donator
Gold Contributor
Member For 3 Years
Member For 2 Years
I'm messed up the wicking a couple of times and gotten it to dry hit and drain juice --- i think i have it down to an art now. :D
 

Bigjay1978

Member For 3 Years
Member For 2 Years
Well I got my Ammit tonight. Put a 0.3 ohm SS fused Clapton in, Koh gen Do cotton and Vaping with a 75vg juice. No dry hits, no leaks and a very tasty Vape.




I have a. 22 Ohm alien Clapton, and this tank puts off some.of the best flavor I have ever gotten.
c7d5b2c4a96128a80e0f805b047224de.jpg
bb98a58df29bb238a0539e6558965606.jpg


Sent from my Nexus 6 using Tapatalk
 

Bigjay1978

Member For 3 Years
Member For 2 Years
Well I got my Ammit tonight. Put a 0.3 ohm SS fused Clapton in, Koh gen Do cotton and Vaping with a 75vg juice. No dry hits, no leaks and a very tasty Vape.

c7d5b2c4a96128a80e0f805b047224de.jpg
bb98a58df29bb238a0539e6558965606.jpg


Sent from my Nexus 6 using Tapatalk
I am running a.22 Ohm alien Clapton in my ammit. This tank puts off some of the best flavor I have ever gotten. I love it.
 

VU Sponsors

Top