Hey guys new to the forum. Did anyone get a Vt200 and take it apart yet?. I love the DNA 200 chip. However i might take it apart and put it in another box. Just curious!
Become a Patron!
HCigar VT200
- Thread starter aarongroover
- Start date
Wouldn't buying the chip make more sense? It's like 80 bucks.
Btw, Welcome to VU...
Yeah maybe, however i wanted to see how it was put together. First time evolv chip user
I'm sure this info is all over the net. I'd start by going to evolv's site. They may have a schematic.
Sorry, you mean on how to put it together?
How to wire it.
Yeah this is a great little mod. Buttons are nice, Evolv as always been stellar. Never could get my hands on one due to the mods were so expensive. I was quite surprised that Hcigar used an evolv chip. However i want to get into building my own. Seems like a nice hobby to get into.
Oh yeah with the li-po batts. This thing is light as ever can barely even tell your holding it....
Does anyone know how to clean the brass 510 connection? Brasso?
Hcigar VT200 and a Smok TFV4 are both out for delivery. Can't wait to get home. You just have to love vape mail 
Cheers,
Steve
Cheers,
Steve
Can't wait to hear what you think of it, enjoy!Hcigar VT200 and a Smok TFV4 are both out for delivery. Can't wait to get home. You just have to love vape mail
Cheers,
Steve
roadshaker
Member For 4 Years
Just a heads up. Check out VapeNW online they have a coming soon on a spare battery for the vt200 for about $20. Still waiting on the Hotcig spare. Oh well.Hcigar VT200 and a Smok TFV4 are both out for delivery. Can't wait to get home. You just have to love vape mail
Cheers,
Steve
Sent from my HTC6535LVW using Tapatalk
My Hcigar vt200 should be delivered tomorrow. Cant wait. Took me a long time to decide which dna200 to buy and was really considering waiting for the whiteout DNA, but after reading the blog posts on their website, they haven't even started building them. Seems like by the time they get everything up and running, the dna200 will be obsolete. The Hcigar looks well made and I love the fact that they will be selling extra batteries.
For all those who own them, how easy is it to change to SS or Ti temperature control? Can it be done on the mod itself, or does this have to be done on escribe every time you want to use one?
For all those who own them, how easy is it to change to SS or Ti temperature control? Can it be done on the mod itself, or does this have to be done on escribe every time you want to use one?
roadshaker
Member For 4 Years
Use steamengine to set up profiles on Escribe and then you can adjust on the mod. One for SS, titanium, etc.
Sent from my HTC6535LVW using Tapatalk
Thanks. Im usually very tech savvy, however the escribe looks complicated with line graphs and stuff. Not much info out there on it either. Thought about waiting for the sx mini ml for the SS, however Im still pissed that yihi is coming out with that mod and not updating the m class.
roadshaker
Member For 4 Years
Steamengine has the graphs in the csv format using wire types old version. Just plug into the profile then use generic settings for temperature and watts. Then you can adjust on the mod. Can make it simple or learn more and adjust everything. Google is your friend! It is truly a mod you can make personal. Good luck and enjoy!
Sent from my HTC6535LVW using Tapatalk
As roadshaker said, there are 8 memory/profiles you can set on the mod in Escribe. You can have them for ex: Ni200, Ti1, SS, etc. It comes preloaded with Ni200, you can get the other TCR at Steamengine. In lieu of that you can also just enter the coefficient number if need be. Within an hour I felt like I'd been using Escribe forever. I think you're going to like the VT200, I know I do.
Cheers,
Steve
Cheers,
Steve
anyone have any experience with Titanium on the dna200? I have 2 different tanks with twisted 28g titanium , dual coil. comes out to .10 ohms. I set the tcr to .00365, 35w, 420 degrees, 200 preheat power, punch is at 7. It hardly fires either one. Its like its barely getting 5 watts. I put either of these tanks on my xcube2, sxmini m or evic vt and its more than I can handle. Whats going on?
All I use is titanium. I have very good results in all my attys. Usually 24g dual coils 100w preheat at 11 for .8 sec and 70w @ 480f. Think you gotta turn up the heat and maybe your tcr is off. You sure it's grade 1?
from Tapatalk
from Tapatalk
Last edited:
I'm making my own hg2 battery pack. I need more battery life and a 7.4v 3000mah will be like 22.2wh which should last Me a day at 80w. Limited to 133 w but I never go over a 100 preheat. Anyone else doing this with there vt200.
from Tapatalk
from Tapatalk
Starting to hear people grumble about the whiteout. ie: making wisecracks about the hype train & constant delays.
For what it's worth the sx mini m class got it's update reports are that it works great...No reason to be pissed
Yeah, I just saw the owner post that he was in China finalizing parts and manufacturing. It's been one thing after the other. Decided that between the delays, and the fact that they are an unproven company, I'll wait. If they come out and the reviews are good as far as construction, I'll get one from a reputable dealer like originvape. Till then, plenty of companies like hcigar and vaporshark thy have proven themselves. Too bad the build quality of hanamodz has gone downhill
That video dated Oct. 12th. He was promising two more weeks. I hope they don't miss that deadline, or there will be a shit load of people bailing out and demanding their money back.
I understand your point reverse engineering things is how the world is built... Go for it I eventually tear everything apart even though at times I wish it wasnt when it was brand new..
As far as I can figure, there is no way to turn it off. You can lock it by 5 clicks of the power button. You can also just lock the power adjustment by holding down the + and - buttons down for 2 seconds. It puts itself to sleep after a certain amount of time of non-use. Thankfully you don't have to perform 5 clicks of the power button to wake it up
Cheers,
Steve
haha I guess when its sleepy its off? I guess the current load is so low they decided to remove an Off button...As far as I can figure, there is no way to turn it off. You can lock it by 5 clicks of the power button. You can also just lock the power adjustment by holding down the + and - buttons down for 2 seconds. It puts itself to sleep after a certain amount of time of non-use. Thankfully you don't have to perform 5 clicks of the power button to wake it up
Cheers,
Steve
I had similar results with a Hana modz 200. I loaded the prolife, but no matter how high I turned it, the never got warm. There was something I wasn't doing right
Ok, love the Vt200 so far but one big problem!! Every time I wake it up from a long sleep (shows home screen) and try to take a hit it's nasty as hell. Ohms aren't reading right even if I previously had them locked. The only cure I've come up with is taking tank off and putting it right back on, then.....and only then! does it finally ask if it's a new atomizer. Changing to a different/compatible profile doesn't help. AND shouldn't be necessary imo. This is a real PIA, any help/suggestions appreciated!