Help changing coil

[Jsmith5064]

I have the fuchai 213, with a smok tfv8, trying to switch that out and use the v8-q4, but it keeps saying check atomizer, do I not have the wires on the bottom connected right?

 

[SMOKIE]

I have the fuchai 213, with a smok tfv8, trying to switch that out and use the v8-q4, but it keeps saying check atomizer, do I not have the wires on the bottom connected right?

Take the coil head out, clean out the base then reinstall. sometimes it is just a matter of not making connection.

 

[Jsmith5064]

Take the coil head out, clean out the base then reinstall. sometimes it is just a matter of not making connection.

Where are the wires supposed to be located? On the outside of the rubber gasket so the main base presses the wire on the gasket?

 

[SMOKIE]

Where are the wires supposed to be located? On the outside of the rubber gasket so the main base presses the wire on the gasket?

What wires? You are changing a coil head correct?

 

[Jsmith5064]

What wires? You are changing a coil head correct?

View attachment 61728

Yeah the ends of the coil..what are the supposed to be touching? I'm new to these not sure how else to describe it, when I scree it into the mod and hit the fire button it just keeps saying check atomizer

 

[SMOKIE]

Yeah the ends of the coil..what are the supposed to be touching? I'm new to these not sure how else to describe it, when I scree it into the mod and hit the fire button it just keeps saying check atomizer

Un screw the coil head out of the tank, clean up with a paper towel any juice in the base and reinsert back into the tank then try it.

 

[morfius1963]

Make sure you screw the coil into the deck kind of tight but not overly tight


Sent from my iPhone using Tapatalk

 

[Jsmith5064]

Idk still not working, there's 2 pairs of coil sticking out of the bottom..then there's the rubber gasket then the metal piece that makes the connection to the mod power terminal..how is the coil headsupposed to be setup, coils inside gasket or on the outside?

 

[morfius1963]

Try putting in another coil a different one my son had the same problem with his just a bad coil maybe


Sent from my iPhone using Tapatalk

 

[Jsmith5064]

Idk still not working, there's 2 pairs of coil sticking out of the bottom..then there's the rubber gasket then the metal piece that makes the connection to the mod power terminal..how is the coil headsupposed to be setup, coils inside gasket or on the outside?

Do u have to change the mode it's in? Power mode or tcr?

 

[morfius1963]

Should be in power mode


Sent from my iPhone using Tapatalk

 

[KDodds]

There are wires coming out of the coil head? If so, throw it out, put in a new head. There should not be any wires extending from the coil head. If you're using the RBA deck, look for a tutorial on YouTube. Again, wires should never extend outside the atomizer, and the leg tails should be snipped off at the post.