Help picking new rta or rda

[roxynoodle]

After that.... My head is spinning..... 12mg nic.....

Holy shit, go lay down

 

[advancedvapesupply]

I really don't know how some things get spread around forums that just aren't true, like the small RTA, small chamber stuff. Or some people repeatedly post that all RTAs leak. None of mine have unless an o ring has gone bad. I suspect it all comes from people who don't build things right.

It's been my personal experience that the smaller chambers do give better flavor but it's not a rule. Not at all true for the boreas (although really, the boreas chamber isn't THAT big), but there are a lot of other tanks I feel that are totally killed in the flavor department by their huge chambers. There's a lot of variables there though, but I don't think it's totally wrong to make that comparison in a lot of cases

Sent from my SM-G935V using Tapatalk

 

[MannyScoot]

Roxy..... Your tank is cool...... Right now I'm running (2) coils on a .13ohm 2.5mm (6wrap) stainless steel build using 90VG

It's really an amazing tank. The deck, the quality, the feel ..... The finish on my black tank is perfect....
I've had tanks brother.......
This is a keeper !!!!!!!!!!!!!!

 

[roxynoodle]

It's been my personal experience that the smaller chambers do give better flavor but it's not a rule. Not at all true for the boreas (although really, the boreas chamber isn't THAT big), but there are a lot of other tanks I feel that are totally killed in the flavor department by their huge chambers. There's a lot of variables there though, but I don't think it's totally wrong to make that comparison in a lot of cases

Sent from my SM-G935V using Tapatalk

Yeah, but it's like saying all Italian girls have mustaches. I don't

 

[MannyScoot]

I just opened the bottom of my Boreas to inspect the cotton and to take a picture of the coils then I noticed my tank was low on juice, I filled it up popped in the coil screwed in the cap and BAM...... Back to Vaping.

.. I love this freeeaking rta .....

 

[MannyScoot]

Fill her up in every way like my lady......
I'm saving to get a modfather rta..... I think this will be for a while......

 

[midknight420]

I'm a huge Griffin fan myself and I have an Augvape Alleria that should be here Tuesday. Might try the Griffin 25. Would go good with you rx200.

 

[MannyScoot]

Brother ..... I sold my Griffin and gave away my vcmt 25mm to a friend Franklin Cromer in Louisiana...
...... . And bought my Boreas.... The Boreas is my current bitch.....

 

[advancedvapesupply]

I'm a huge Griffin fan myself and I have an Augvape Alleria that should be here Tuesday. Might try the Griffin 25. Would go good with you rx200.

The alleria is a hell of a flavor tank

Sent from my SM-G935V using Tapatalk

 

[MannyScoot]

I give away and sell stuff I don't enjoy..... Someone else might enjoy it.......

 

[midknight420]

The alleria is a hell of a flavor tank

Sent from my SM-G935V using Tapatalk

I can't wait for it to arrive. I am getting a build in our soon as it gets here.

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

I can't wait for it to arrive. I am getting a build in our soon as it gets here.

I'm not crazy, my mother had me tested.

I just posted this on another thread but this is what brought the alleria back into my daily rotation:

Little baby 316L aliens. Out of control flavor

Sent from my SM-G935V using Tapatalk

 

[midknight420]

I just posted this on another thread but this is what brought the alleria back into my daily rotation:

Little baby 316L aliens. Out of control flavor

Sent from my SM-G935V using Tapatalk

That's just beautiful. I've been rocking some awesome claptons in my Griffin. It's phenomenal

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

That's just beautiful. I've been rocking some awesome claptons in my Griffin. It's phenomenal

I'm not crazy, my mother had me tested.

What kind?

Sent from my SM-G935V using Tapatalk

 

[midknight420]

26/32 ka1 claptons 3mm id @ .45Ω

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

26/32 ka1 claptons 3mm id @ .45Ω

I'm not crazy, my mother had me tested.

I'm obviously all for stainless steel, it's what we sell, but I personally think 316L vertebraids on the griffin 22 are amazing. Sounds like you got a good build choice though for the griffin

Sent from my SM-G935V using Tapatalk

 

[midknight420]

I wish I had the know how to make my own claptons or braids, but I'm not there yet. I like ss too, but need more wire to do much more with ss.

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

I wish I had the know how to make my own claptons or braids, but I'm not there yet. I like ss too, but need more wire to do much more with ss.

I'm not crazy, my mother had me tested.

I only make wire I can't easily buy. Claptons are not that hard to make, but braids, it's so much easier to buy premade. It's just a matter of if you enjoy making it yourself sort of thing. If it's the vape you're interested in, premade is the best choice, and in a lot of cases it's cheaper than making it yourself
But if youre the type that enjoys making wire, obviously that's the way to go. Just my (biased) opinion. We're a wire company...

Sent from my SM-G935V using Tapatalk

 

[midknight420]

I only make wire I can't easily buy. Claptons are not that hard to make, but braids, it's so much easier to buy premade. It's just a matter of if you enjoy making it yourself sort of thing. If it's the vape you're interested in, premade is the best choice, and in a lot of cases it's cheaper than making it yourself

Sent from my SM-G935V using Tapatalk

Where would you find braids? I haven't ever bought premade coils before. Save for my crown tank and mom's Nautilus that is

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

Where would you find braids? I haven't ever bought premade coils before. Save for my crown tank and mom's Nautilus that is

I'm not crazy, my mother had me tested.

We sell ss braids, and I know there's a few handmade guys that sell braids in kanthal and nichrome in coils, not spools though from what I've seen

Sent from my SM-G935V using Tapatalk

 

[midknight420]

We sell ss braids, and I know there's a few handmade guys that sell braids in kanthal and nichrome in coils, not spools though from what I've seen

Sent from my SM-G935V using Tapatalk

Spools would be nice, but don't think you ever find it that way sadly.

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

Spools would be nice, but don't think you ever find it that way sadly.

I'm not crazy, my mother had me tested.

Check us out sometime, we sell spools. But only in ss. No kanthal or nichrome. There's also some great tutorials on youtube if you decide to go the handmade route. Some of the braids are pretty easy to do, but time consuming. My best advice is to wear gloves..

Sent from my SM-G935V using Tapatalk

 

[midknight420]

Check us out sometime, we sell spools. But only in ss. No kanthal or nichrome. There's also some great tutorials on youtube if you decide to go the handmade route. Some of the braids are pretty easy to do, but time consuming. My best advice is to wear gloves..

Sent from my SM-G935V using Tapatalk

What is the website? I'd love to check it out.

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

What is the website? I'd love to check it out.

I'm not crazy, my mother had me tested.

I sent you a message. I try not to promote on the forum, I try to just talk and try to help people. Just saying it's out there, haha

Sent from my SM-G935V using Tapatalk

 

[midknight420]

I sent you a message. I try not to promote on the forum, I try to just talk and try to help people. Just saying it's out there, haha

Sent from my SM-G935V using Tapatalk

I found your site. Good prices too. I found quite a few that I will be getting. Thanks alot

I'm not crazy, my mother had me tested.

 

[advancedvapesupply]

I found your site. Good prices too. I found quite a few that I will be getting. Thanks alot

I'm not crazy, my mother had me tested.

If you have any questions or need help with a build, just let me know or send me an email

Sent from my SM-G935V using Tapatalk

 

[AlbyKortoona]

Why is SS430 always "out of stock"?

 

[advancedvapesupply]

Why is SS430 always "out of stock"?

To be perfectly honest, we've have production delays. We added on the option for 430SS as "coming soon" when we got assurances from our supplier we would have it within a week. Which turned out not to be true. We're extremely picky about our wire sources, so I'd rather it say out of stock than rush to get any 430 we can find.

 

[Mattp169]

I'm obviously all for stainless steel, it's what we sell, but I personally think 316L vertebraids on the griffin 22 are amazing. Sounds like you got a good build choice though for the griffin

Sent from my SM-G935V using Tapatalk

AGREED Im running their 30ga vertabraid on 2 griffins and its EXCELLENT, a little more flavor then a fused clapton But the vertabraid is a bit springyer the fused claptons, so its a bit tougher to work with for me. I just need an RBA that I can get dual coil vertabraid wire in. All I have is a petri v2 clone and I can not for a life of me get bot h coils in those holes.

 

[advancedvapesupply]

AGREED Im running their 30ga vertabraid on 2 griffins and its EXCELLENT, a little more flavor then a fused clapton But the vertabraid is a bit springyer the fused claptons, so its a bit tougher to work with for me. I just need an RBA that I can get dual coil vertabraid wire in. All I have is a petri v2 clone and I can not for a life of me get bot h coils in those holes.

Velocity is obviously the easiest rda to use for that, and so something like a tsunami would be equally easy, but it has a lot of air and the vertebraid cant handle too much air. Basically any rda where they don't have to share post holes you can get them in there easier. Vertebraid doesn't like sharing post holes at all

Sent from my SM-G935V using Tapatalk

 

[midknight420]

If you have any questions or need help with a build, just let me know or send me an email

Sent from my SM-G935V using Tapatalk

Thanks alot. You have great prices. It may be a bit, I spent my vape budget for a month at least lol. And I'm sure I'll have questions. I'll message you if I get stuck

I'm not crazy, my mother had me tested.

 

[Jimi D]

Here is a pic

How's that black pepper taste in your juice bro ?

 

[MannyScoot]

Ha

Sent from my 710C using Tapatalk